hypothesis experiment analysis report

Are you seeking one-on-one college counseling and/or essay support? Limited spots are now available. Click here to learn more.

How to Write a Lab Report – with Example/Template

April 11, 2024

Perhaps you’re in the midst of your challenging AP chemistry class in high school, or perhaps college you’re enrolled in biology , chemistry , or physics at university. At some point, you will likely be asked to write a lab report. Sometimes, your teacher or professor will give you specific instructions for how to format and write your lab report, and if so, use that. In case you’re left to your own devices, here are some guidelines you might find useful. Continue reading for the main elements of a lab report, followed by a detailed description of the more writing-heavy parts (with a lab report example/lab report template). Lastly, we’ve included an outline that can help get you started.

What is a lab report?

A lab report is an overview of your experiment. Essentially, it explains what you did in the experiment and how it went. Most lab reports end up being 5-10 pages long (graphs or other images included), though the length depends on the experiment. Here are some brief explanations of the essential parts of a lab report:

Title : The title says, in the most straightforward way possible, what you did in the experiment. Often, the title looks something like, “Effects of ____ on _____.” Sometimes, a lab report also requires a title page, which includes your name (and the names of any lab partners), your instructor’s name, and the date of the experiment.

Abstract : This is a short description of key findings of the experiment so that a potential reader could get an idea of the experiment before even beginning.

Introduction : This is comprised of one or several paragraphs summarizing the purpose of the lab. The introduction usually includes the hypothesis, as well as some background information.

Lab Report Example (Continued)

Materials : Perhaps the simplest part of your lab report, this is where you list everything needed for the completion of your experiment.

Methods : This is where you describe your experimental procedure. The section provides necessary information for someone who would want to replicate your study. In paragraph form, write out your methods in chronological order, though avoid excessive detail.

Data : Here, you should document what happened in the experiment, step-by-step. This section often includes graphs and tables with data, as well as descriptions of patterns and trends. You do not need to interpret all of the data in this section, but you can describe trends or patterns, and state which findings are interesting and/or significant.

Discussion of results : This is the overview of your findings from the experiment, with an explanation of how they pertain to your hypothesis, as well as any anomalies or errors.

Conclusion : Your conclusion will sum up the results of your experiment, as well as their significance. Sometimes, conclusions also suggest future studies.

Sources : Often in APA style , you should list all texts that helped you with your experiment. Make sure to include course readings, outside sources, and other experiments that you may have used to design your own.

How to write the abstract

The abstract is the experiment stated “in a nutshell”: the procedure, results, and a few key words. The purpose of the academic abstract is to help a potential reader get an idea of the experiment so they can decide whether to read the full paper. So, make sure your abstract is as clear and direct as possible, and under 200 words (though word count varies).

When writing an abstract for a scientific lab report, we recommend covering the following points:

• Background : Why was this experiment conducted?
• Objectives : What problem is being addressed by this experiment?
• Methods : How was the study designed and conducted?
• Results : What results were found and what do they mean?
• Conclusion : Were the results expected? Is this problem better understood now than before? If so, how?

How to write the introduction

The introduction is another summary, of sorts, so it could be easy to confuse the introduction with the abstract. While the abstract tends to be around 200 words summarizing the entire study, the introduction can be longer if necessary, covering background information on the study, what you aim to accomplish, and your hypothesis. Unlike the abstract (or the conclusion), the introduction does not need to state the results of the experiment.

Here is a possible order with which you can organize your lab report introduction:

• Intro of the intro : Plainly state what your study is doing.
• Background : Provide a brief overview of the topic being studied. This could include key terms and definitions. This should not be an extensive literature review, but rather, a window into the most relevant topics a reader would need to understand in order to understand your research.
• Importance : Now, what are the gaps in existing research? Given the background you just provided, what questions do you still have that led you to conduct this experiment? Are you clarifying conflicting results? Are you undertaking a new area of research altogether?
• Prediction: The plants placed by the window will grow faster than plants placed in the dark corner.
• Hypothesis: Basil plants placed in direct sunlight for 2 hours per day grow at a higher rate than basil plants placed in direct sunlight for 30 minutes per day.
• How you test your hypothesis : This is an opportunity to briefly state how you go about your experiment, but this is not the time to get into specific details about your methods (save this for your results section). Keep this part down to one sentence, and voila! You have your introduction.

How to write a discussion section

Here, we’re skipping ahead to the next writing-heavy section, which will directly follow the numeric data of your experiment. The discussion includes any calculations and interpretations based on this data. In other words, it says, “Now that we have the data, why should we care?”  This section asks, how does this data sit in relation to the hypothesis? Does it prove your hypothesis or disprove it? The discussion is also a good place to mention any mistakes that were made during the experiment, and ways you would improve the experiment if you were to repeat it. Like the other written sections, it should be as concise as possible.

Here is a list of points to cover in your lab report discussion:

• Weaker statement: These findings prove that basil plants grow more quickly in the sunlight.
• Stronger statement: These findings support the hypothesis that basil plants placed in direct sunlight grow at a higher rate than basil plants given less direct sunlight.
• Factors influencing results : This is also an opportunity to mention any anomalies, errors, or inconsistencies in your data. Perhaps when you tested the first round of basil plants, the days were sunnier than the others. Perhaps one of the basil pots broke mid-experiment so it needed to be replanted, which affected your results. If you were to repeat the study, how would you change it so that the results were more consistent?
• Implications : How do your results contribute to existing research? Here, refer back to the gaps in research that you mentioned in your introduction. Do these results fill these gaps as you hoped?
• Questions for future research : Based on this, how might your results contribute to future research? What are the next steps, or the next experiments on this topic? Make sure this does not become too broad—keep it to the scope of this project.

How to write a lab report conclusion

This is your opportunity to briefly remind the reader of your findings and finish strong. Your conclusion should be especially concise (avoid going into detail on findings or introducing new information).

Here are elements to include as you write your conclusion, in about 1-2 sentences each:

• Restate your goals : What was the main question of your experiment? Refer back to your introduction—similar language is okay.
• Restate your methods : In a sentence or so, how did you go about your experiment?
• Key findings : Briefly summarize your main results, but avoid going into detail.
• Limitations : What about your experiment was less-than-ideal, and how could you improve upon the experiment in future studies?
• Significance and future research : Why is your research important? What are the logical next-steps for studying this topic?

Template for beginning your lab report

Here is a compiled outline from the bullet points in these sections above, with some examples based on the (overly-simplistic) basil growth experiment. Hopefully this will be useful as you begin your lab report.

1) Title (ex: Effects of Sunlight on Basil Plant Growth )

2) Abstract (approx. 200 words)

• Background ( This experiment looks at… )
• Objectives ( It aims to contribute to research on…)
• Methods ( It does so through a process of…. )
• Results (Findings supported the hypothesis that… )
• Conclusion (These results contribute to a wider understanding about…)

3) Introduction (approx. 1-2 paragraphs)

• Intro ( This experiment looks at… )
• Background ( Past studies on basil plant growth and sunlight have found…)
• Importance ( This experiment will contribute to these past studies by…)
• Hypothesis ( Basil plants placed in direct sunlight for 2 hours per day grow at a higher rate than basil plants placed in direct sunlight for 30 minutes per day.)
• How you will test your hypothesis ( This hypothesis will be tested by a process of…)

4) Materials (list form) (ex: pots, soil, seeds, tables/stands, water, light source )

5) Methods (approx. 1-2 paragraphs) (ex: 10 basil plants were measured throughout a span of…)

6) Data (brief description and figures) (ex: These charts demonstrate a pattern that the basil plants placed in direct sunlight…)

7) Discussion (approx. 2-3 paragraphs)

• Support or reject hypothesis ( These findings support the hypothesis that basil plants placed in direct sunlight grow at a higher rate than basil plants given less direct sunlight.)
• Factors that influenced your results ( Outside factors that could have altered the results include…)
• Implications ( These results contribute to current research on basil plant growth and sunlight because…)
• Questions for further research ( Next steps for this research could include…)
• Restate your goals ( In summary, the goal of this experiment was to measure…)
• Restate your methods ( This hypothesis was tested by…)
• Key findings ( The findings supported the hypothesis because…)
• Limitations ( Although, certain elements were overlooked, including…)
• Significance and future research ( This experiment presents possibilities of future research contributions, such as…)
• Sources (approx. 1 page, usually in APA style)

Final thoughts – Lab Report Example

Hopefully, these descriptions have helped as you write your next lab report. Remember that different instructors may have different preferences for structure and format, so make sure to double-check when you receive your assignment. All in all, make sure to keep your scientific lab report concise, focused, honest, and organized. Good luck!

For more reading on coursework success, check out the following articles:

• How to Write the AP Lang Argument Essay (With Example)
• How to Write the AP Lang Rhetorical Analysis Essay (With Example)
• 49 Most Interesting Biology Research Topics
• 50 Best Environmental Science Research Topics
• High School Success

Sarah Mininsohn

With a BA from Wesleyan University and an MFA from the University of Illinois at Urbana-Champaign, Sarah is a writer, educator, and artist. She served as a graduate instructor at the University of Illinois, a tutor at St Peter’s School in Philadelphia, and an academic writing tutor and thesis mentor at Wesleyan’s Writing Workshop.

• 2-Year Colleges
• ADHD/LD/Autism/Executive Functioning
• Application Strategies
• Best Colleges by Major
• Best Colleges by State
• Big Picture
• Career & Personality Assessment
• College Essay
• College Search/Knowledge
• College Success
• Costs & Financial Aid
• Data Visualizations
• Dental School Admissions
• Extracurricular Activities
• General Knowledge
• Graduate School Admissions
• High Schools
• Homeschool Resources
• Law School Admissions
• Medical School Admissions
• Navigating the Admissions Process
• Online Learning
• Outdoor Adventure
• Private High School Spotlight
• Research Programs
• Summer Program Spotlight
• Summer Programs
• Teacher Tools
• Test Prep Provider Spotlight

“Innovative and invaluable…use this book as your college lifeline.”

— Lynn O'Shaughnessy

Nationally Recognized College Expert

College Planning in Your Inbox

Join our information-packed monthly newsletter.

The Scientific Method by Science Made Simple

Understanding and using the scientific method.

The Scientific Method is a process used to design and perform experiments. It's important to minimize experimental errors and bias, and increase confidence in the accuracy of your results.

In the previous sections, we talked about how to pick a good topic and specific question to investigate. Now we will discuss how to carry out your investigation.

Steps of the Scientific Method

• Observation/Research
• Experimentation

Now that you have settled on the question you want to ask, it's time to use the Scientific Method to design an experiment to answer that question.

If your experiment isn't designed well, you may not get the correct answer. You may not even get any definitive answer at all!

The Scientific Method is a logical and rational order of steps by which scientists come to conclusions about the world around them. The Scientific Method helps to organize thoughts and procedures so that scientists can be confident in the answers they find.

OBSERVATION is first step, so that you know how you want to go about your research.

HYPOTHESIS is the answer you think you'll find.

PREDICTION is your specific belief about the scientific idea: If my hypothesis is true, then I predict we will discover this.

EXPERIMENT is the tool that you invent to answer the question, and

CONCLUSION is the answer that the experiment gives.

Don't worry, it isn't that complicated. Let's take a closer look at each one of these steps. Then you can understand the tools scientists use for their science experiments, and use them for your own.

OBSERVATION

This step could also be called "research." It is the first stage in understanding the problem.

After you decide on topic, and narrow it down to a specific question, you will need to research everything that you can find about it. You can collect information from your own experiences, books, the internet, or even smaller "unofficial" experiments.

Let's continue the example of a science fair idea about tomatoes in the garden. You like to garden, and notice that some tomatoes are bigger than others and wonder why.

Because of this personal experience and an interest in the problem, you decide to learn more about what makes plants grow.

For this stage of the Scientific Method, it's important to use as many sources as you can find. The more information you have on your science fair topic, the better the design of your experiment is going to be, and the better your science fair project is going to be overall.

Also try to get information from your teachers or librarians, or professionals who know something about your science fair project. They can help to guide you to a solid experimental setup.

The next stage of the Scientific Method is known as the "hypothesis." This word basically means "a possible solution to a problem, based on knowledge and research."

The hypothesis is a simple statement that defines what you think the outcome of your experiment will be.

All of the first stage of the Scientific Method -- the observation, or research stage -- is designed to help you express a problem in a single question ("Does the amount of sunlight in a garden affect tomato size?") and propose an answer to the question based on what you know. The experiment that you will design is done to test the hypothesis.

Using the example of the tomato experiment, here is an example of a hypothesis:

TOPIC: "Does the amount of sunlight a tomato plant receives affect the size of the tomatoes?"

HYPOTHESIS: "I believe that the more sunlight a tomato plant receives, the larger the tomatoes will grow.

This hypothesis is based on:

(1) Tomato plants need sunshine to make food through photosynthesis, and logically, more sun means more food, and;

(2) Through informal, exploratory observations of plants in a garden, those with more sunlight appear to grow bigger.

The hypothesis is your general statement of how you think the scientific phenomenon in question works.

Your prediction lets you get specific -- how will you demonstrate that your hypothesis is true? The experiment that you will design is done to test the prediction.

An important thing to remember during this stage of the scientific method is that once you develop a hypothesis and a prediction, you shouldn't change it, even if the results of your experiment show that you were wrong.

An incorrect prediction does NOT mean that you "failed." It just means that the experiment brought some new facts to light that maybe you hadn't thought about before.

Continuing our tomato plant example, a good prediction would be: Increasing the amount of sunlight tomato plants in my experiment receive will cause an increase in their size compared to identical plants that received the same care but less light.

This is the part of the scientific method that tests your hypothesis. An experiment is a tool that you design to find out if your ideas about your topic are right or wrong.

It is absolutely necessary to design a science fair experiment that will accurately test your hypothesis. The experiment is the most important part of the scientific method. It's the logical process that lets scientists learn about the world.

On the next page, we'll discuss the ways that you can go about designing a science fair experiment idea.

The final step in the scientific method is the conclusion. This is a summary of the experiment's results, and how those results match up to your hypothesis.

You have two options for your conclusions: based on your results, either:

(1) YOU CAN REJECT the hypothesis, or

(2) YOU CAN NOT REJECT the hypothesis.

This is an important point!

You can not PROVE the hypothesis with a single experiment, because there is a chance that you made an error somewhere along the way.

What you can say is that your results SUPPORT the original hypothesis.

If your original hypothesis didn't match up with the final results of your experiment, don't change the hypothesis.

Instead, try to explain what might have been wrong with your original hypothesis. What information were you missing when you made your prediction? What are the possible reasons the hypothesis and experimental results didn't match up?

Remember, a science fair experiment isn't a failure simply because does not agree with your hypothesis. No one will take points off if your prediction wasn't accurate. Many important scientific discoveries were made as a result of experiments gone wrong!

A science fair experiment is only a failure if its design is flawed. A flawed experiment is one that (1) doesn't keep its variables under control, and (2) doesn't sufficiently answer the question that you asked of it.

Search This Site:

Science Fairs

• Introduction
• Project Ideas
• Types of Projects
• Pick a Topic
• Scientific Method
• Design Your Experiment
• Present Your Project
• What Judges Want
• Parent Info

Recommended *

• Sample Science Projects - botany, ecology, microbiology, nutrition

* This site contains affiliate links to carefully chosen, high quality products. We may receive a commission for purchases made through these links.

• Terms of Service

Copyright © 2006 - 2023, Science Made Simple, Inc. All Rights Reserved.

The science fair projects & ideas, science articles and all other material on this website are covered by copyright laws and may not be reproduced without permission.

Select a year to see courses

Learn online or on-campus during the term or school holidays

• Maths Acceleration
• English Advanced
• Maths Standard
• Maths Advanced
• Maths Extension 1
• English Standard
• Maths Extension 2

Get HSC exam ready in just a week

• UCAT Exam Preparation

Select a year to see available courses

• English Units 1/2
• Maths Methods Units 1/2
• Biology Units 1/2
• Chemistry Units 1/2
• Physics Units 1/2
• English Units 3/4
• Maths Methods Units 3/4
• Biology Unit 3/4
• Chemistry Unit 3/4
• Physics Unit 3/4
• VIC UCAT Preparation Course
• Matrix Learning Methods
• Matrix+ Online Courses
• Matrix Term Courses
• Matrix Holiday Courses
• Campus overview
• Castle Hill
• Strathfield
• Sydney City
• Liverpool (Opening soon)
• Year 3 NAPLAN Guide
• OC Test Guide
• Selective Schools Guide
• NSW Primary School Rankings
• NSW High School Rankings
• NSW High Schools Guide
• VIC School Rankings
• ATAR & Scaling Guide
• HSC Study Planning Kit
• Student Success Secrets
• Reading List
• Year 6 English
• Year 7 & 8 English
• Year 9 English
• Year 10 English
• Year 11 English Standard
• Year 11 English Advanced
• Year 12 English Standard
• Year 12 English Advanced
• HSC English Skills
• How To Write An Essay
• How to Analyse Poetry
• English Techniques Toolkit
• Year 7 Maths
• Year 8 Maths
• Year 9 Maths
• Year 10 Maths
• Year 11 Maths Advanced
• Year 11 Maths Extension 1
• Year 12 Maths Standard 2
• Year 12 Maths Advanced
• Year 12 Maths Extension 1
• Year 12 Maths Extension 2

Science guides to help you get ahead

• Year 11 Biology
• Year 11 Chemistry
• Year 11 Physics
• Year 12 Biology
• Year 12 Chemistry
• Year 12 Physics
• Physics Practical Skills
• Periodic Table
• Set Location
• 1300 008 008
• 1300 634 117

Welcome to Matrix Education

To ensure we are showing you the most relevant content, please select your location below.

How to Write a Scientific Report | Step-by-Step Guide

Got to document an experiment but don't know how? In this post, we'll guide you step-by-step through how to write a scientific report and provide you with an example.

Get free study tips and resources delivered to your inbox.

Join 75,893 students who already have a head start.

" * " indicates required fields

You might also like

• 20 Must-Read Books For Year 7-10 Students
• 7 Important Punctuation Marks Your Child Must Master
• Five Ways to Prepare Your Child for High School English
• How to Use Your Assessment Notification to Ace Your Assessment Task
• 4 Ways To Find Inspiration For Creative Writing

Related courses

Year 9 science, year 10 science.

Is your teacher expecting you to write an experimental report for every class experiment? Are you still unsure about how to write a scientific report properly? Don’t fear! We’ll guide you through all parts of a scientific report, step-by-step.

How to write a scientific report:

• What is a scientific report
• General rules for writing Scientific reports
• Introduction/Background information
• Risk assessment

What is a scientific report?

A scientific report documents all aspects of an experimental investigation. This includes:

• The aim of the experiment
• The hypothesis
• An introduction to the relevant background theory
• The methods used
• The results
• A discussion of the results
• The conclusion

Scientific reports allow their readers to understand the experiment without doing it themselves. These reports also give others the opportunity to check the methodology of the experiment to ensure the validity of the results.

Download your free experimental report template

A template to teach you to write perfect science reports

Done! Your download has been emailed.

Please allow a few minutes for it to land in your inbox.

We take your privacy seriously. T&Cs  and  Privacy Policy .

A scientific report is written in several stages. We write the introduction, aim, and hypothesis before performing the experiment, record the results during the experiment, and complete the discussion and conclusions after the experiment.

But, before we delve deeper into how to write a scientific report, we need to have a science experiment to write about! Choose an experiment to use as an example from our 7 Simple Experiments You Can Do At Home article.

General rules for writing scientific reports

Learning how to write a scientific report is different from writing English essays or speeches.

You have to use:

• Passive voice (which you should avoid when writing for other subjects like English!)
• Past-tense language
• Headings and subheadings
• A pencil to draw scientific diagrams and graphs
• Simple and clear lines for scientific diagrams
• Tables and graphs where necessary

Structure of scientific reports

Now that you know the general rules on how to write scientific reports, let’s look at the conventions for their structure!

The title should simply introduce what your experiment is about.

The Role of Light in Photosynthesis

2. Introduction/Background information

Write a paragraph that gives your readers background information to understand your experiment.

This includes explaining scientific theories, processes, and other related knowledge.

Photosynthesis is a vital process for life. It occurs when plants intake carbon dioxide, water, and light, and results in the production of glucose and water. The light required for photosynthesis is absorbed by chlorophyll, the green pigment of plants, which is contained in the chloroplasts.

The glucose produced through photosynthesis is stored as starch, which is used as an energy source for the plant and its consumers.

The presence of starch in the leaves of a plant indicates that photosynthesis has occurred.

The aim tells us what is going to be tested in the experiment. This should be short, concise, and clear.

The aim of the experiment is to test whether light is required for photosynthesis to occur.

4. Hypothesis

The hypothesis is what you predict the outcome of the experiment will be. You have to use background information to make an educated prediction.

It is predicted that photosynthesis will occur only in leaves that are exposed to light and not in leaves that are not exposed to light. This will be indicated by the presence or absence of starch in the leaves.

5. Risk assessment

Identify the hazards related to the experiment and explain how you would prevent or minimise the risks. A hazard is something that can cause harm, and a risk is how likely it is that harm will occur because of the hazard.

A table is an excellent way to present your risk assessment.

Remember, you have to specify the  type of harm that can occur because of the hazard. It’s not enough to simply identify the hazard.

• Do not write:  “Scissors are sharp.”
• Instead, write: “Scissors are sharp and can cause injury.”

The method has 3 parts:

• A list of every material used
• Steps of what you did in the experiment
• A scientific diagram of the experimental apparatus

Let’s break down what you need to do for each section.

6a. Materials

This must list every piece of equipment and material used in the experiment.

Remember, you need to specify the amount of each material you used.

• 1 geranium plant
• Aluminium foil
• 2 test tubes
• 1 test tube rack
• 1 pair of scissors
• 1 250 mL beaker
• 1 pair of forceps
• 1 10 mL measuring cylinder
• Iodine solution (5 mL)
• Methylated spirit (50 mL)
• Boiling water
• 2 Petri dishes

As a rule of thumb, you should write the method clearly and in a way that readers can repeat the experiment and get similar results.

Using a numbered list for the steps of your experimental procedure is much clearer than writing a whole paragraph of text.  The steps should:

• Be written in a sequential order, based on when they were performed
• Specify any equipment that was used
• Specify the quantity of any materials that were used

You also need to use past tense and passive voice when you’re writing your method. Scientific reports are supposed to show the readers what you did in the experiment, not what you will do.

• Aluminium foil was used to fully cover a leaf of the geranium plant. The plant was left in the sun for three days.
• On the third day, the covered leaf and 1 non-covered leaf were collected from the plant. The foil was removed from the covered leaf, and a 1 cm square was cut from each leaf using a pair of scissors.
• 150 mL of water was boiled in a kettle and poured into a 250 mL beaker.
• Using forceps, the 1 cm square of covered leaf was placed into the beaker of boiling water for 2 minutes. It was then placed in a test tube labelled “dark”.
• The water in the beaker was discarded and replaced with 150 mL of freshly boiled water.
• Using forceps, the 1 cm square non-covered leaf was placed into the beaker of boiling water for 2 minutes. It was then placed in a test tube labelled “light”.
• 5 mL of methylated spirit was measured with a measuring cylinder and poured into each test tube so that the leaves were fully covered.
• The water in the beaker was replaced with 150 mL of freshly boiled water and both the “light” and “dark” test tubes were immersed in the beaker of boiling water for 5 minutes.
• The leaves were collected from each test tube with forceps, rinsed under cold running water, and placed onto separate labelled Petri dishes.
• 3 drops of iodine solution were added to each leaf.
• Both Petri dishes were placed side by side and observations were recorded.
• The experiment was repeated 5 times, and results were compared between different groups.

6c. Diagram

After you complete your steps, it’s time to draw your scientific diagrams! Here are some rules for drawing scientific diagrams:

• Always use a pencil to draw your scientific diagrams.
• Use simple, sharp, 2D lines and shapes to draw your diagram. Don’t draw 3D shapes or use shading.
• Label everything in your diagram.
• Use thin, straight lines to label your diagram. Don’t use arrows.
• Ensure that the label lines touch the outline of the equipment you are labelling and do not cross over it or stop short of it.
• The label lines should never cross over each other.
• Use a ruler for any straight lines in your diagram.
• Draw a sufficiently large diagram so all components can be seen clearly.

This is where you document the results of your experiment. The data that you record for your experiment will generally be qualitative and/or quantitative.

Qualitative data is data that relates to qualities and is based on observations (qualitative – quality). This type of data is descriptive and is recorded in words. For example, the colour changed from green to orange, or the liquid became hot.

Quantitative data refers to n umerical data (quantitative – quantity). This type of data is recorded using numbers and is either measured or counted. For example, the plant grew 5.2 cm, or there were 5 frogs.

The way you record your results is important. Most of the time, a table is the best way to do this.

Here are some rules to using tables

• Use a pencil and a ruler to draw your table.
• Draw neat and straight lines.
• Ensure that the table is closed (connect all your lines).
• Don’t cross your lines (erase any lines that stick out of the table).
• Use appropriate columns and rows.
• Properly name each column and row (including the units of measurement in brackets).
• Do not write your units in the body of your table (units belong in the header).
• Always include a title.

Note : If your results require calculations, clearly write each step.

Observations of the effects of light on the amount of starch in plant leaves.

If quantitative data was recorded, the data is often also plotted on a graph.

8. Discussion

The discussion is where you analyse and interpret your results, and identify any experimental errors or possible areas of improvements.

You should divide your discussion as follows.

1. Trend in the results

Describe the ‘trend’ in your results. That is, the relationship you observed between your independent and dependent variables.

The independent variable is the variable that you’re changing in the experiment. In this experiment, it’s the amount of light that the leaves are exposed to.

The dependent variable is the variable that you’re measuring in the experiment. In this experiment, it’s the presence of starch in the leaves.

The presence of starch is indicated when the addition of iodine causes the leaf to turn dark purple. The results show that starch was present in the leaves that were exposed to light, while the leaves that were not exposed to light did not contain starch.

2. Scientific explanation

Give an explanation of the results using scientific knowledge, theories, and any other scientific resources you find.

As starch is produced during photosynthesis, these results show that light plays a key role in photosynthesis.

3. Validity 

Validity refers to whether or not your results are valid. This can be done by examining your variables.

VA lidity =  VA riables

Identify the independent, dependent, controlled variables, and the control experiment (if you have one).

The controlled variables are the variables that you keep the same across all tests e.g. the size of the leaf sample.

The control experiment is where you don’t apply an independent variable. It is untouched for the whole experiment.

Ensure that you never change more than one variable at a time!

The independent variable of the experiment was the amount of light that the leaves were exposed to (the covered and uncovered geranium leaf), while the dependent variable was the presence of starch. The controlled variables were the size of the leaf sample, the duration of the experiment, the amount of time the solutions were heated, and the amount of iodine solution used.

4. Reliability 

Identify how you ensured the reliability of the results.

RE liability = RE petition

Show that you repeated your experiments, cross-checked your results with other groups, or collated your results with the class.

The reliability of the results was ensured by repeating the experiment 5 times and comparing results with other groups. Since other groups obtained comparable results, the results are reliable.

5. Accuracy

You should discuss accuracy if your results are in the form of quantitative data (numerical), and there is an accepted value for the result.

Accuracy wouldn’t be discussed for our photosynthesis experiment as qualitative data was collected. But, it would be discussed if we were measuring gravity using a pendulum:

The measured value of gravity was 9.8 m/s 2 , which is in agreement with the accepted value of 9.8 m/s 2 .

6. Possible improvements 

Point out any errors or risks you found in the experiment and suggest a method to improve it.

If there are none, then suggest new ways to improve the experimental design, and/or minimise error and risks.

Possible improvements could be made by including control experiments. For example, testing whether the iodine solution turns dark purple when added to water or methylated spirits. This would help to ensure that the purple colour observed in the experiments is due to the presence of starch in the leaves rather than impurities.

9. Conclusion

State whether the aim was achieved and if your hypothesis was supported.

The aim of the investigation was achieved, and it was found that light is required for photosynthesis to occur. This was evidenced by the presence of starch in leaves that had been exposed to light, and the absence of starch in leaves that had been unexposed. These results support the proposed hypothesis.

Learn everything you need to know about Science

Gain the confidence and skills to ace Science!

Learn one term ahead of school with the Subject Matter Experts!

Learn more ?

Written by Matrix Science Team

© Matrix Education and www.matrix.edu.au, 2023. Unauthorised use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Matrix Education and www.matrix.edu.au with appropriate and specific direction to the original content.

Year 9 Science tutoring at Matrix is known for helping students build a strong foundation before studying Biology, Chemistry or Physics in senior school.

Learning methods available

Level 9 Science tutoring program

Year 10 Science tutoring at Matrix is known for helping students build a strong foundation before studying Biology, Chemistry or Physics in Year 11 and 12.

Level 10 Science tutoring program for Victorian students

Related articles

10 Things You Must Know About Context for Year 9 English

Unsure about what context is and how to research it? In this article, we'll explain what it is, how to research it, and how to incorporate it into your Year 9 English responses.

Writing Body Paragraphs: How to ‘Layer’ Your Analysis

Allusions. Analogies. Anaphora. Alliteration.

In the past, you might have memorised a bunch of English literary techniques. While knowing your techniques is indeed important, you also need to know how to effectively write your technique analysis into your essays. To get those marks, the most effective way to incorporate literary analysis into your essay writing is to layer your analysis.

Vaneeza’s Study Hacks: How I Aced My Year 10 Half Yearly Exams

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Hypothesis Testing | A Step-by-Step Guide with Easy Examples

Published on November 8, 2019 by Rebecca Bevans . Revised on June 22, 2023.

Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics . It is most often used by scientists to test specific predictions, called hypotheses, that arise from theories.

There are 5 main steps in hypothesis testing:

• State your research hypothesis as a null hypothesis and alternate hypothesis (H o ) and (H a  or H 1 ).
• Collect data in a way designed to test the hypothesis.
• Perform an appropriate statistical test .
• Decide whether to reject or fail to reject your null hypothesis.
• Present the findings in your results and discussion section.

Though the specific details might vary, the procedure you will use when testing a hypothesis will always follow some version of these steps.

Table of contents

Step 1: state your null and alternate hypothesis, step 2: collect data, step 3: perform a statistical test, step 4: decide whether to reject or fail to reject your null hypothesis, step 5: present your findings, other interesting articles, frequently asked questions about hypothesis testing.

After developing your initial research hypothesis (the prediction that you want to investigate), it is important to restate it as a null (H o ) and alternate (H a ) hypothesis so that you can test it mathematically.

The alternate hypothesis is usually your initial hypothesis that predicts a relationship between variables. The null hypothesis is a prediction of no relationship between the variables you are interested in.

• H 0 : Men are, on average, not taller than women. H a : Men are, on average, taller than women.

Prevent plagiarism. Run a free check.

For a statistical test to be valid , it is important to perform sampling and collect data in a way that is designed to test your hypothesis. If your data are not representative, then you cannot make statistical inferences about the population you are interested in.

There are a variety of statistical tests available, but they are all based on the comparison of within-group variance (how spread out the data is within a category) versus between-group variance (how different the categories are from one another).

If the between-group variance is large enough that there is little or no overlap between groups, then your statistical test will reflect that by showing a low p -value . This means it is unlikely that the differences between these groups came about by chance.

Alternatively, if there is high within-group variance and low between-group variance, then your statistical test will reflect that with a high p -value. This means it is likely that any difference you measure between groups is due to chance.

Your choice of statistical test will be based on the type of variables and the level of measurement of your collected data .

• an estimate of the difference in average height between the two groups.
• a p -value showing how likely you are to see this difference if the null hypothesis of no difference is true.

Based on the outcome of your statistical test, you will have to decide whether to reject or fail to reject your null hypothesis.

In most cases you will use the p -value generated by your statistical test to guide your decision. And in most cases, your predetermined level of significance for rejecting the null hypothesis will be 0.05 – that is, when there is a less than 5% chance that you would see these results if the null hypothesis were true.

In some cases, researchers choose a more conservative level of significance, such as 0.01 (1%). This minimizes the risk of incorrectly rejecting the null hypothesis ( Type I error ).

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

The results of hypothesis testing will be presented in the results and discussion sections of your research paper , dissertation or thesis .

In the results section you should give a brief summary of the data and a summary of the results of your statistical test (for example, the estimated difference between group means and associated p -value). In the discussion , you can discuss whether your initial hypothesis was supported by your results or not.

In the formal language of hypothesis testing, we talk about rejecting or failing to reject the null hypothesis. You will probably be asked to do this in your statistics assignments.

However, when presenting research results in academic papers we rarely talk this way. Instead, we go back to our alternate hypothesis (in this case, the hypothesis that men are on average taller than women) and state whether the result of our test did or did not support the alternate hypothesis.

If your null hypothesis was rejected, this result is interpreted as “supported the alternate hypothesis.”

These are superficial differences; you can see that they mean the same thing.

You might notice that we don’t say that we reject or fail to reject the alternate hypothesis . This is because hypothesis testing is not designed to prove or disprove anything. It is only designed to test whether a pattern we measure could have arisen spuriously, or by chance.

If we reject the null hypothesis based on our research (i.e., we find that it is unlikely that the pattern arose by chance), then we can say our test lends support to our hypothesis . But if the pattern does not pass our decision rule, meaning that it could have arisen by chance, then we say the test is inconsistent with our hypothesis .

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Descriptive statistics
• Measures of central tendency
• Correlation coefficient

Methodology

• Cluster sampling
• Stratified sampling
• Types of interviews
• Cohort study
• Thematic analysis

Research bias

• Implicit bias
• Cognitive bias
• Survivorship bias
• Availability heuristic
• Nonresponse bias
• Regression to the mean

Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics. It is used by scientists to test specific predictions, called hypotheses , by calculating how likely it is that a pattern or relationship between variables could have arisen by chance.

A hypothesis states your predictions about what your research will find. It is a tentative answer to your research question that has not yet been tested. For some research projects, you might have to write several hypotheses that address different aspects of your research question.

A hypothesis is not just a guess — it should be based on existing theories and knowledge. It also has to be testable, which means you can support or refute it through scientific research methods (such as experiments, observations and statistical analysis of data).

Null and alternative hypotheses are used in statistical hypothesis testing . The null hypothesis of a test always predicts no effect or no relationship between variables, while the alternative hypothesis states your research prediction of an effect or relationship.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Bevans, R. (2023, June 22). Hypothesis Testing | A Step-by-Step Guide with Easy Examples. Scribbr. Retrieved September 18, 2024, from https://www.scribbr.com/statistics/hypothesis-testing/

Is this article helpful?

Rebecca Bevans

Other students also liked, choosing the right statistical test | types & examples, understanding p values | definition and examples, what is your plagiarism score.

Optional Lab Activities

Scientific method lab report.

The report should be typed and single spaced. See grading rubric at the end of this page for clarity on formatting.

Requirements

Should include Title (brief, concise, yet descriptive), your name, lab instructor’s name, and lab section (such as L14 or L24, etc.).

Note: this is a separate sheet

Body of Report

Identify the different sections of the body of the report with headings.

• The report should begin with a brief paragraph (complete sentences) that includes a statement of the problem and your hypothesis (remember your hypothesis should be written as a testable statement).
• What question are you trying to answer?
• Include any preliminary observations or background information about the subject (in this case the Alka-Seltzer tablet) such as what the tablet is used for, directions on packaging, personal experience you may have, etc. Be sure to cite any sources.
• Write a possible explanation/prediction for the problem/question you are asking.
• Make sure this possible explanation/prediction is a complete sentence and not a question.
• Make sure the statement is testable. In other words, can you perform an experiment that will either support or refute your prediction. If you cannot not think of a way to test your prediction, then it is not testable.
• Make a list (this does not need to be in paragraph form) of all  items used in the experiment and their quantities. Of the materials used, identify which are dependent and independent variables, constants (standardized variable) and control group (you will lose points if you do not identify all  dependent and independent variables, constants and controls) .
• Write at least one paragraph (complete sentences) which explains what you did in the experiment.
• Your procedure should be written so that anyone else could repeat the experiment. For instance, if you used hot water, how did you make the water hot and what temperature was it; if you chose salt water, what was the concentration of the salt water, etc. That means that even some of the most obvious steps need to be stated so there is no uncertainty.
• When designing the procedure, be sure to include replicating the experiment (trials) to ensure data is reproducible and valid.
• Write at least a paragraph (complete sentences) describing the results and observations of your experiment. Here you will compare results for control groups and experimental groups and not simply list the numbers.
• This section also includes both  a data table and graph to illustrate the results of you experiment. Be sure to include calculated averages of trials.
• All tables, graphs and charts should be labeled appropriately (a title, labels for x & y axis, legend etc.) so the reader will be able to understand the information presented.
• Write at least a paragraph restating your hypothesis and whether you accept or reject your hypothesis
• In this section, explain  why you accepted or rejected your hypothesis using data from the experiment . Include a brief summary of the data—averages, highest, lowest, etc., to help the reader understand your results and why you have come to particular conclusions.
• Discuss your thoughts about the possible reasons for your results (for example, if you chose salt water as a variable, give a possible reason why salt water, in particular, may have generated your results).
• Discuss possible errors that could have occurred in the collection of the data (experimental errors) and describe how these errors may have impacted the data.

Sample Report

This is a good lab report written for a different (and more complex experiment). You can use it as a model if you want.

Lab Report Grading Rubric

• Biology 101 Labs . Authored by : Lynette Hauser. Provided by : Tidewater Community College . Located at : http://www.tcc.edu/ . License : CC BY: Attribution

Scientific Method Example

Illustration by J.R. Bee. ThoughtCo. 

• Cell Biology
• Weather & Climate
• B.A., Biology, Emory University
• A.S., Nursing, Chattahoochee Technical College

The scientific method is a series of steps that scientific investigators follow to answer specific questions about the natural world. Scientists use the scientific method to make observations, formulate hypotheses , and conduct scientific experiments .

A scientific inquiry starts with an observation. Then, the formulation of a question about what has been observed follows. Next, the scientist will proceed through the remaining steps of the scientific method to end at a conclusion.

The six steps of the scientific method are as follows:

Observation

The first step of the scientific method involves making an observation about something that interests you. Taking an interest in your scientific discovery is important, for example, if you are doing a science project , because you will want to work on something that holds your attention. Your observation can be of anything from plant movement to animal behavior, as long as it is something you want to know more about.​ This step is when you will come up with an idea if you are working on a science project.

Once you have made your observation, you must formulate a question about what you observed. Your question should summarize what it is you are trying to discover or accomplish in your experiment. When stating your question, be as specific as possible.​ For example, if you are doing a project on plants , you may want to know how plants interact with microbes. Your question could be: Do plant spices inhibit bacterial growth ?

The hypothesis is a key component of the scientific process. A hypothesis is an idea that is suggested as an explanation for a natural event, a particular experience, or a specific condition that can be tested through definable experimentation. It states the purpose of your experiment, the variables used, and the predicted outcome of your experiment. It is important to note that a hypothesis must be testable. That means that you should be able to test your hypothesis through experimentation .​ Your hypothesis must either be supported or falsified by your experiment. An example of a good hypothesis is: If there is a relation between listening to music and heart rate, then listening to music will cause a person's resting heart rate to either increase or decrease.

Once you have developed a hypothesis, you must design and conduct an experiment that will test it. You should develop a procedure that states clearly how you plan to conduct your experiment. It is important you include and identify a controlled variable or dependent variable in your procedure. Controls allow us to test a single variable in an experiment because they are unchanged. We can then make observations and comparisons between our controls and our independent variables (things that change in the experiment) to develop an accurate conclusion.​

The results are where you report what happened in the experiment. That includes detailing all observations and data made during your experiment. Most people find it easier to visualize the data by charting or graphing the information.​

Developing a conclusion is the final step of the scientific method. This is where you analyze the results from the experiment and reach a determination about the hypothesis. Did the experiment support or reject your hypothesis? If your hypothesis was supported, great. If not, repeat the experiment or think of ways to improve your procedure.

• Glycolysis Steps
• Biology Prefixes and Suffixes: chrom- or chromo-
• Biology Prefixes and Suffixes: proto-
• 6 Things You Should Know About Biological Evolution
• Biology Prefixes and Suffixes: Aer- or Aero-
• Taxonomy and Organism Classification
• Homeostasis
• Biology Prefixes and Suffixes: diplo-
• The Biology Suffix -lysis
• Biology Prefixes and Suffixes Index
• Biology Prefixes and Suffixes: tel- or telo-
• Parasitism: Definition and Examples
• Biology Prefixes and Suffixes: Erythr- or Erythro-
• Biology Prefixes and Suffixes: ana-
• Biology Prefixes and Suffixes: phago- or phag-
• Biology Prefixes and Suffixes: -phyll or -phyl

Scientific Method: Step 3: HYPOTHESIS

• Step 1: QUESTION
• Step 2: RESEARCH
• Step 3: HYPOTHESIS
• Step 4: EXPERIMENT
• Step 5: DATA
• Step 6: CONCLUSION

Step 3: State your hypothesis

Now it's time to state your hypothesis . The hypothesis is an educated guess as to what will happen during your experiment. 

The hypothesis is often written using the words "IF" and "THEN." For example, " If I do not study, then I will fail the test." The "if' and "then" statements reflect your independent and dependent variables . 

The hypothesis should relate back to your original question and must be testable .

A word about variables...

Your experiment will include variables to measure and to explain any cause and effect. Below you will find some useful links describing the different types of variables.

• "What are independent and dependent variables" NCES
• [VIDEO] Biology: Independent vs. Dependent Variables (Nucleus Medical Media) Video explaining independent and dependent variables, with examples.

Resource Links

• What is and How to Write a Good Hypothesis in Research? (Elsevier)
• Hypothesis brochure from Penn State/Berks

• << Previous: Step 2: RESEARCH
• Next: Step 4: EXPERIMENT >>
• Last Updated: Aug 26, 2024 10:04 AM
• URL: https://harford.libguides.com/scientific_method

• Monash Online

Student Academic Success

• 1:1 Consultation 1:1 Consultation
• Study better Study better
• Build digital capabilities Build digital capabilities
• Understand assessments Understand assessments
• Excel at writing Excel at writing
• Enhance your thinking Enhance your thinking
• Present confidently Present confidently
• Collaborate with others Collaborate with others
• Improve your academic English Improve your academic English
• Maintain academic integrity Maintain academic integrity
• Advance your graduate studies Advance your graduate studies
• O-week workshops O-week workshops
• Let's Talk Assessments Let's Talk Assessments
• Set up for academic success Set up for academic success
• Writing classes Writing classes
• End of semester End of semester
• PhD writing workshops and courses PhD writing workshops and courses
• First Year Undergraduate Success First Year Undergraduate Success
• Graduate coursework success Graduate coursework success
• Academic Language Skills Analysis Academic Language Skills Analysis
• Mathematics skills analysis Mathematics skills analysis
• Orientation Orientation
• SAS cafe SAS cafe
• SAS pop up SAS pop up
• Written Feedback Written Feedback
• About us About us
• Skip to content
• Skip to navigation

Science: Lab report

What is a science lab report.

A science lab report is a structured way of communicating the outcomes of your practical work.

The structure of a typical lab report includes the following sections:

• Introduction  - Why you conducted the practical work, and indicate your aim, hypothesis or research question.
• Method - How you conducted the practical work and how any data processed.
• Results - What was the data, process or product obtained from the practical work.
• Discussion - How your results addressed your aim and hypothesis.
• Conclusion -  What was the overall outcome of your practical work and how do your finding relate to the larger body of scientific knowledge.

You can apply the common report writing techniques outlined below, after always checking the specific details of your assignment.

Top tips for science lab reports View

Lab report structure

The title describes the purpose of the practical work in precise terms.

The majority of your practical work will involve measurements, observations or the creation of some object of interest. For example: The Period of a Simple Pendulum

It is clear from the above lab report title that it describes the measurement of a property called a ‘period’, and the object of interest is a ‘simple pendulum’.

Check your understanding View

The abstract provides a brief overview of the practical work, including key results and conclusions.

Keep your abstract short, i.e. about one paragraph or 250 to 500 words. It must be clear enough that the reader can understand a summary of the report without needing to read the rest of it.

In general, the abstract should answer six questions. Addressing each question only requires one to two sentences:

• Why was the experiment conducted? (big-picture/real-world view).
• What specific problem/research question was being addressed?
• What methods were used to solve the problem/answer the question?
• What results were obtained?
• What do these results mean?
• How do the results answer the overall question or improve our understanding of the problem?

Shorter lab reports may not require an abstract, so check your guidelines first.

Introduction

The introduction is where you introduce the reader to the broader context of your practical work and then narrow down to the hypothesis, aims or research question you intend to address.

You should also succinctly explain relevant theory and discuss any relevant laws, equations or theorems.

The method section is where you describe what you actually did during the practical work. You need to describe the actions you took in a way that someone from your field has enough information to replicate the process and achieve a similar result.

You must also include any unplanned changes to the original process which occurred during the execution of the experiment. A great way to keep track of this is to use a lab notebook during the practical work to note any change you make.

Turn lab instructions into a lab report method

A common mistake students make is copying the instructions their teachers provide directly into their method section. You will generally be provided with a set of instructions to complete your practical work. These instructions are NOT written in the style of a laboratory report. A typical set of instructions usually includes:

• How the apparatus and equipment were set up (e.g. experimental set-up), usually including a diagram.
• A list of materials used.
• Steps used to collect the data.
• Any experimental difficulties encountered and how they were resolved or worked around.

Below is an example of the instructions provided to a student to carry out a first year chemistry experiment.

Lab instructions

Phrases are used here to specifically instruct the student who may be performing the technique for the first time. This is different from a lab report where you are reporting on what you did. For example, the instructions say:

• 'use a clear pipette…'
• 'rinse the burette…'
• 'remember to take the reading from the centre of the meniscus…'

These are not appropriate phrases to include in the lab report.

Also note that the language of the instructions is in the present tense in bullet points. The method section of your report should instead be written in the past tense as a cohesive paragraph.

However, there are ways you can change the language of the instructions to write your method section.

Below is an example of how these lab instructions were summarised into a method in a laboratory report:

Lab report: method

25ml of HCl(aq) was pipetted into a 100ml conical flask. A burette was then filled with standardised NaOH(aq). A sheet of white paper was placed under the burette. The conical flask was placed onto the white paper and five drops of universal indicator was added to the flask. The standardised NaOH(aq) was titrated into the flask with constant swirling until there was an observable colour change.

How to change lab instructions into a lab method

How to use a passive voice in lab reports.

While most science units require that you report in the passive voice , some require the active voice . In the example below, the first person plural is used in the active voice, i.e. "we initiated". Usage of the active voice is accepted in some disciplines, but not others. Check your unit information or talk to your teacher.

While in science the passive voice is generally preferred, some disciplines may allow or prefer the active voice. Read samples of student reports below and identify which examples are written in passive voice, and which use active voice.

The results section is where you present a summary of the data collected during your experiments. This section is not just a copy of the raw data from your lab notebook. Rather, it may involve calculation, analysis and the drawing up of tables and figures to present your data.

Calculations

When you take your raw data and perform some sort of mathematical operation to change it, it is good practice to show the equations you used in your analysis, as well as one worked example using each equation. Calculations that are very long or repeated multiple times are usually included in an appendix (see below).

In some disciplines, if formulae are used, it is common to number them as equations:

Error analysis

Error analysis is a type of calculation that indicates the accuracy of your results, usually done by determining the level of uncertainty. The sources of error that you need to consider will vary between experiments and disciplines, but you will usually need to factor in both random and systematic errors.

Any analysis and calculations of the errors or uncertainties in the experiment are included in the results section unless otherwise specified. In some disciplines the analysis and uncertainty calculations are presented under their own heading. Check the requirements given in your unit information or lab manual, or ask your tutor if you are unsure where to place calculations

Tables and figures

Most numerical data are presented using tables or figures. These need to be clearly labelled following the standard conventions for captions, and titles must tell the reader precisely what data is being presented.

If a measurement is stated in the title, in a column of a table or on the axis of a graph and it has units associated with it, these must be included (usually in brackets).

The table below presents a series of measurements collected during an experiment. Notice the units in every column with the brackets. Some measurements such as pH or C p do not have units.

The figure below is a graphical representation of aerodynamic measurements. Notice the axes are labelled with appropriate units and the caption at the bottom of the figure clearly describes what the figure is about.

Figures can also be a wide variety of images. The figure below is an image taken from a type of molecular microscope. Notice the caption at the bottom of the figure clearly describing the figure and the specification of the magnification of the microscope.

If you must use figures from another source, indicate in the citation whether you have modified it in any way to avoid collusion or plagiarism .

The discussion section is where you interpret and evaluate your results. To do this you need to summarise your key results, summarise unexpected results, and explain how your results relate to your aims, hypotheses or literature as stated at the start of the report. Here are some tips on writing discussion sections:

Identify and describe any trends or patterns you have observed. If these are numerical trends, state the values. Avoid using unspecific words such as ‘higher, lower, increased, decreased’, which can make the information vague.

Compare the experimental results with any predictions you made.

Interpret what the results mean in relation to the aims, research question(s) or hypothesis.

Describe any results which were unexpected or didn’t match your predictions.

Suggest explanations for unexpected results based on the theory and procedures of the experiment.

Evaluate how any sources of error might impact on the interpretation of your results in relation to the aims, research question(s) or hypothesis.

• State the limitations of the study and link to literature

Clarify how the limitations of the study might affect the accuracy and precision of the answers to your aim, research question or hypothesis.

Suggest how the experiment or analysis could have been improved. A longer report may require support from the academic literature.

Explain how your results do or do not address your aim, research question or hypothesis, and indicate future directions for the research.

The discussion example below is from a first-year Biology unit. The aim of this experiment was to identify decomposition rates of leaf breakdown to establish rates of energy transfer.

Drag each description of each component of the Discussion section to its example. Notice the order in which the components make up a coherent Discussion section.

Students often make the mistake of thinking a conclusion section is identical to a discussion section.

The conclusion section is where you summarise your report. A conclusion is usually one paragraph or 200 to 300 words. In this way a conclusion is very similar to an abstract, but with more emphasis on the results and discussion.

A conclusion never introduces any new ideas or results. Rather, it provides a concise summary of those which have already been presented in the report. When writing a conclusion you should:

• briefly restate the purpose of the experiment (i.e. the question it was seeking to answer)
• identify the main findings (i.e. the answer to the research question)
• note the main limitations that are relevant to the interpretation of the results
• summarise what the experiment has contributed to the broader understanding of the problem.

Conclusion example with feedback

When in-text citations are incorporated into your lab report (typically in the introduction or discussion) you must always have the full references included in a separate reference list. The reference list is a separate section that comes after your conclusion (and before any appendices). Check your lab manual or unit information to determine which referencing style is preferred. Carefully follow that referencing style for your in-text references and reference list. You can find examples and information about common referencing styles in the Citing and referencing Library guide . The following is an example of a reference list based on the in-text citations used in the Introduction and Conclusion sections in this tutorial. This example has been formatted in accordance with the CSIRO referencing style .

Jones T, Smith K, Nguyen P, di Alberto P (2017) Effects of habitat overlap on population sampling. Environmental Ecology Journal 75 , 23-29. doi: 10.5432/1111.23

Tian M, Castillo TL (2016) Solar heating uptake in Australia: rates, causes and effects. Energy Efficiency Reports. Report no. 10, The Department of Sustainability and Environment, Canberra.

An appendix (plural = appendices) contains material that is too detailed to include in the main report, such as tables of raw data or detailed calculations.

Each appendix must be:

• given a number (or letter) and title
• referred to by number (or letter) at the relevant point in the text.

The calculated values are shown in Table 3 below. For detailed calculations, see Appendix 1.

Your feedback matters

We want to hear from you! Let us know what you found most useful or share your suggestions for improving this resource.

Scientific Reports

What this handout is about.

This handout provides a general guide to writing reports about scientific research you’ve performed. In addition to describing the conventional rules about the format and content of a lab report, we’ll also attempt to convey why these rules exist, so you’ll get a clearer, more dependable idea of how to approach this writing situation. Readers of this handout may also find our handout on writing in the sciences useful.

Background and pre-writing

Why do we write research reports.

You did an experiment or study for your science class, and now you have to write it up for your teacher to review. You feel that you understood the background sufficiently, designed and completed the study effectively, obtained useful data, and can use those data to draw conclusions about a scientific process or principle. But how exactly do you write all that? What is your teacher expecting to see?

To take some of the guesswork out of answering these questions, try to think beyond the classroom setting. In fact, you and your teacher are both part of a scientific community, and the people who participate in this community tend to share the same values. As long as you understand and respect these values, your writing will likely meet the expectations of your audience—including your teacher.

So why are you writing this research report? The practical answer is “Because the teacher assigned it,” but that’s classroom thinking. Generally speaking, people investigating some scientific hypothesis have a responsibility to the rest of the scientific world to report their findings, particularly if these findings add to or contradict previous ideas. The people reading such reports have two primary goals:

• They want to gather the information presented.
• They want to know that the findings are legitimate.

Your job as a writer, then, is to fulfill these two goals.

How do I do that?

Good question. Here is the basic format scientists have designed for research reports:

• Introduction

Methods and Materials

This format, sometimes called “IMRAD,” may take slightly different shapes depending on the discipline or audience; some ask you to include an abstract or separate section for the hypothesis, or call the Discussion section “Conclusions,” or change the order of the sections (some professional and academic journals require the Methods section to appear last). Overall, however, the IMRAD format was devised to represent a textual version of the scientific method.

The scientific method, you’ll probably recall, involves developing a hypothesis, testing it, and deciding whether your findings support the hypothesis. In essence, the format for a research report in the sciences mirrors the scientific method but fleshes out the process a little. Below, you’ll find a table that shows how each written section fits into the scientific method and what additional information it offers the reader.

Thinking of your research report as based on the scientific method, but elaborated in the ways described above, may help you to meet your audience’s expectations successfully. We’re going to proceed by explicitly connecting each section of the lab report to the scientific method, then explaining why and how you need to elaborate that section.

Although this handout takes each section in the order in which it should be presented in the final report, you may for practical reasons decide to compose sections in another order. For example, many writers find that composing their Methods and Results before the other sections helps to clarify their idea of the experiment or study as a whole. You might consider using each assignment to practice different approaches to drafting the report, to find the order that works best for you.

What should I do before drafting the lab report?

The best way to prepare to write the lab report is to make sure that you fully understand everything you need to about the experiment. Obviously, if you don’t quite know what went on during the lab, you’re going to find it difficult to explain the lab satisfactorily to someone else. To make sure you know enough to write the report, complete the following steps:

• What are we going to do in this lab? (That is, what’s the procedure?)
• Why are we going to do it that way?
• What are we hoping to learn from this experiment?
• Why would we benefit from this knowledge?
• Consult your lab supervisor as you perform the lab. If you don’t know how to answer one of the questions above, for example, your lab supervisor will probably be able to explain it to you (or, at least, help you figure it out).
• Plan the steps of the experiment carefully with your lab partners. The less you rush, the more likely it is that you’ll perform the experiment correctly and record your findings accurately. Also, take some time to think about the best way to organize the data before you have to start putting numbers down. If you can design a table to account for the data, that will tend to work much better than jotting results down hurriedly on a scrap piece of paper.
• Record the data carefully so you get them right. You won’t be able to trust your conclusions if you have the wrong data, and your readers will know you messed up if the other three people in your group have “97 degrees” and you have “87.”
• Consult with your lab partners about everything you do. Lab groups often make one of two mistakes: two people do all the work while two have a nice chat, or everybody works together until the group finishes gathering the raw data, then scrams outta there. Collaborate with your partners, even when the experiment is “over.” What trends did you observe? Was the hypothesis supported? Did you all get the same results? What kind of figure should you use to represent your findings? The whole group can work together to answer these questions.
• Consider your audience. You may believe that audience is a non-issue: it’s your lab TA, right? Well, yes—but again, think beyond the classroom. If you write with only your lab instructor in mind, you may omit material that is crucial to a complete understanding of your experiment, because you assume the instructor knows all that stuff already. As a result, you may receive a lower grade, since your TA won’t be sure that you understand all the principles at work. Try to write towards a student in the same course but a different lab section. That student will have a fair degree of scientific expertise but won’t know much about your experiment particularly. Alternatively, you could envision yourself five years from now, after the reading and lectures for this course have faded a bit. What would you remember, and what would you need explained more clearly (as a refresher)?

Once you’ve completed these steps as you perform the experiment, you’ll be in a good position to draft an effective lab report.

Introductions

How do i write a strong introduction.

For the purposes of this handout, we’ll consider the Introduction to contain four basic elements: the purpose, the scientific literature relevant to the subject, the hypothesis, and the reasons you believed your hypothesis viable. Let’s start by going through each element of the Introduction to clarify what it covers and why it’s important. Then we can formulate a logical organizational strategy for the section.

The inclusion of the purpose (sometimes called the objective) of the experiment often confuses writers. The biggest misconception is that the purpose is the same as the hypothesis. Not quite. We’ll get to hypotheses in a minute, but basically they provide some indication of what you expect the experiment to show. The purpose is broader, and deals more with what you expect to gain through the experiment. In a professional setting, the hypothesis might have something to do with how cells react to a certain kind of genetic manipulation, but the purpose of the experiment is to learn more about potential cancer treatments. Undergraduate reports don’t often have this wide-ranging a goal, but you should still try to maintain the distinction between your hypothesis and your purpose. In a solubility experiment, for example, your hypothesis might talk about the relationship between temperature and the rate of solubility, but the purpose is probably to learn more about some specific scientific principle underlying the process of solubility.

For starters, most people say that you should write out your working hypothesis before you perform the experiment or study. Many beginning science students neglect to do so and find themselves struggling to remember precisely which variables were involved in the process or in what way the researchers felt that they were related. Write your hypothesis down as you develop it—you’ll be glad you did.

As for the form a hypothesis should take, it’s best not to be too fancy or complicated; an inventive style isn’t nearly so important as clarity here. There’s nothing wrong with beginning your hypothesis with the phrase, “It was hypothesized that . . .” Be as specific as you can about the relationship between the different objects of your study. In other words, explain that when term A changes, term B changes in this particular way. Readers of scientific writing are rarely content with the idea that a relationship between two terms exists—they want to know what that relationship entails.

Not a hypothesis:

“It was hypothesized that there is a significant relationship between the temperature of a solvent and the rate at which a solute dissolves.”

Hypothesis:

“It was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases.”

Put more technically, most hypotheses contain both an independent and a dependent variable. The independent variable is what you manipulate to test the reaction; the dependent variable is what changes as a result of your manipulation. In the example above, the independent variable is the temperature of the solvent, and the dependent variable is the rate of solubility. Be sure that your hypothesis includes both variables.

Justify your hypothesis

You need to do more than tell your readers what your hypothesis is; you also need to assure them that this hypothesis was reasonable, given the circumstances. In other words, use the Introduction to explain that you didn’t just pluck your hypothesis out of thin air. (If you did pluck it out of thin air, your problems with your report will probably extend beyond using the appropriate format.) If you posit that a particular relationship exists between the independent and the dependent variable, what led you to believe your “guess” might be supported by evidence?

Scientists often refer to this type of justification as “motivating” the hypothesis, in the sense that something propelled them to make that prediction. Often, motivation includes what we already know—or rather, what scientists generally accept as true (see “Background/previous research” below). But you can also motivate your hypothesis by relying on logic or on your own observations. If you’re trying to decide which solutes will dissolve more rapidly in a solvent at increased temperatures, you might remember that some solids are meant to dissolve in hot water (e.g., bouillon cubes) and some are used for a function precisely because they withstand higher temperatures (they make saucepans out of something). Or you can think about whether you’ve noticed sugar dissolving more rapidly in your glass of iced tea or in your cup of coffee. Even such basic, outside-the-lab observations can help you justify your hypothesis as reasonable.

Background/previous research

This part of the Introduction demonstrates to the reader your awareness of how you’re building on other scientists’ work. If you think of the scientific community as engaging in a series of conversations about various topics, then you’ll recognize that the relevant background material will alert the reader to which conversation you want to enter.

Generally speaking, authors writing journal articles use the background for slightly different purposes than do students completing assignments. Because readers of academic journals tend to be professionals in the field, authors explain the background in order to permit readers to evaluate the study’s pertinence for their own work. You, on the other hand, write toward a much narrower audience—your peers in the course or your lab instructor—and so you must demonstrate that you understand the context for the (presumably assigned) experiment or study you’ve completed. For example, if your professor has been talking about polarity during lectures, and you’re doing a solubility experiment, you might try to connect the polarity of a solid to its relative solubility in certain solvents. In any event, both professional researchers and undergraduates need to connect the background material overtly to their own work.

Organization of this section

Most of the time, writers begin by stating the purpose or objectives of their own work, which establishes for the reader’s benefit the “nature and scope of the problem investigated” (Day 1994). Once you have expressed your purpose, you should then find it easier to move from the general purpose, to relevant material on the subject, to your hypothesis. In abbreviated form, an Introduction section might look like this:

“The purpose of the experiment was to test conventional ideas about solubility in the laboratory [purpose] . . . According to Whitecoat and Labrat (1999), at higher temperatures the molecules of solvents move more quickly . . . We know from the class lecture that molecules moving at higher rates of speed collide with one another more often and thus break down more easily [background material/motivation] . . . Thus, it was hypothesized that as the temperature of a solvent increases, the rate at which a solute will dissolve in that solvent increases [hypothesis].”

Again—these are guidelines, not commandments. Some writers and readers prefer different structures for the Introduction. The one above merely illustrates a common approach to organizing material.

How do I write a strong Materials and Methods section?

As with any piece of writing, your Methods section will succeed only if it fulfills its readers’ expectations, so you need to be clear in your own mind about the purpose of this section. Let’s review the purpose as we described it above: in this section, you want to describe in detail how you tested the hypothesis you developed and also to clarify the rationale for your procedure. In science, it’s not sufficient merely to design and carry out an experiment. Ultimately, others must be able to verify your findings, so your experiment must be reproducible, to the extent that other researchers can follow the same procedure and obtain the same (or similar) results.

Here’s a real-world example of the importance of reproducibility. In 1989, physicists Stanley Pons and Martin Fleischman announced that they had discovered “cold fusion,” a way of producing excess heat and power without the nuclear radiation that accompanies “hot fusion.” Such a discovery could have great ramifications for the industrial production of energy, so these findings created a great deal of interest. When other scientists tried to duplicate the experiment, however, they didn’t achieve the same results, and as a result many wrote off the conclusions as unjustified (or worse, a hoax). To this day, the viability of cold fusion is debated within the scientific community, even though an increasing number of researchers believe it possible. So when you write your Methods section, keep in mind that you need to describe your experiment well enough to allow others to replicate it exactly.

With these goals in mind, let’s consider how to write an effective Methods section in terms of content, structure, and style.

Sometimes the hardest thing about writing this section isn’t what you should talk about, but what you shouldn’t talk about. Writers often want to include the results of their experiment, because they measured and recorded the results during the course of the experiment. But such data should be reserved for the Results section. In the Methods section, you can write that you recorded the results, or how you recorded the results (e.g., in a table), but you shouldn’t write what the results were—not yet. Here, you’re merely stating exactly how you went about testing your hypothesis. As you draft your Methods section, ask yourself the following questions:

• How much detail? Be precise in providing details, but stay relevant. Ask yourself, “Would it make any difference if this piece were a different size or made from a different material?” If not, you probably don’t need to get too specific. If so, you should give as many details as necessary to prevent this experiment from going awry if someone else tries to carry it out. Probably the most crucial detail is measurement; you should always quantify anything you can, such as time elapsed, temperature, mass, volume, etc.
• Rationale: Be sure that as you’re relating your actions during the experiment, you explain your rationale for the protocol you developed. If you capped a test tube immediately after adding a solute to a solvent, why did you do that? (That’s really two questions: why did you cap it, and why did you cap it immediately?) In a professional setting, writers provide their rationale as a way to explain their thinking to potential critics. On one hand, of course, that’s your motivation for talking about protocol, too. On the other hand, since in practical terms you’re also writing to your teacher (who’s seeking to evaluate how well you comprehend the principles of the experiment), explaining the rationale indicates that you understand the reasons for conducting the experiment in that way, and that you’re not just following orders. Critical thinking is crucial—robots don’t make good scientists.
• Control: Most experiments will include a control, which is a means of comparing experimental results. (Sometimes you’ll need to have more than one control, depending on the number of hypotheses you want to test.) The control is exactly the same as the other items you’re testing, except that you don’t manipulate the independent variable-the condition you’re altering to check the effect on the dependent variable. For example, if you’re testing solubility rates at increased temperatures, your control would be a solution that you didn’t heat at all; that way, you’ll see how quickly the solute dissolves “naturally” (i.e., without manipulation), and you’ll have a point of reference against which to compare the solutions you did heat.

Describe the control in the Methods section. Two things are especially important in writing about the control: identify the control as a control, and explain what you’re controlling for. Here is an example:

“As a control for the temperature change, we placed the same amount of solute in the same amount of solvent, and let the solution stand for five minutes without heating it.”

Structure and style

Organization is especially important in the Methods section of a lab report because readers must understand your experimental procedure completely. Many writers are surprised by the difficulty of conveying what they did during the experiment, since after all they’re only reporting an event, but it’s often tricky to present this information in a coherent way. There’s a fairly standard structure you can use to guide you, and following the conventions for style can help clarify your points.

• Subsections: Occasionally, researchers use subsections to report their procedure when the following circumstances apply: 1) if they’ve used a great many materials; 2) if the procedure is unusually complicated; 3) if they’ve developed a procedure that won’t be familiar to many of their readers. Because these conditions rarely apply to the experiments you’ll perform in class, most undergraduate lab reports won’t require you to use subsections. In fact, many guides to writing lab reports suggest that you try to limit your Methods section to a single paragraph.
• Narrative structure: Think of this section as telling a story about a group of people and the experiment they performed. Describe what you did in the order in which you did it. You may have heard the old joke centered on the line, “Disconnect the red wire, but only after disconnecting the green wire,” where the person reading the directions blows everything to kingdom come because the directions weren’t in order. We’re used to reading about events chronologically, and so your readers will generally understand what you did if you present that information in the same way. Also, since the Methods section does generally appear as a narrative (story), you want to avoid the “recipe” approach: “First, take a clean, dry 100 ml test tube from the rack. Next, add 50 ml of distilled water.” You should be reporting what did happen, not telling the reader how to perform the experiment: “50 ml of distilled water was poured into a clean, dry 100 ml test tube.” Hint: most of the time, the recipe approach comes from copying down the steps of the procedure from your lab manual, so you may want to draft the Methods section initially without consulting your manual. Later, of course, you can go back and fill in any part of the procedure you inadvertently overlooked.
• Past tense: Remember that you’re describing what happened, so you should use past tense to refer to everything you did during the experiment. Writers are often tempted to use the imperative (“Add 5 g of the solid to the solution”) because that’s how their lab manuals are worded; less frequently, they use present tense (“5 g of the solid are added to the solution”). Instead, remember that you’re talking about an event which happened at a particular time in the past, and which has already ended by the time you start writing, so simple past tense will be appropriate in this section (“5 g of the solid were added to the solution” or “We added 5 g of the solid to the solution”).
• Active: We heated the solution to 80°C. (The subject, “we,” performs the action, heating.)
• Passive: The solution was heated to 80°C. (The subject, “solution,” doesn’t do the heating–it is acted upon, not acting.)

Increasingly, especially in the social sciences, using first person and active voice is acceptable in scientific reports. Most readers find that this style of writing conveys information more clearly and concisely. This rhetorical choice thus brings two scientific values into conflict: objectivity versus clarity. Since the scientific community hasn’t reached a consensus about which style it prefers, you may want to ask your lab instructor.

How do I write a strong Results section?

Here’s a paradox for you. The Results section is often both the shortest (yay!) and most important (uh-oh!) part of your report. Your Materials and Methods section shows how you obtained the results, and your Discussion section explores the significance of the results, so clearly the Results section forms the backbone of the lab report. This section provides the most critical information about your experiment: the data that allow you to discuss how your hypothesis was or wasn’t supported. But it doesn’t provide anything else, which explains why this section is generally shorter than the others.

Before you write this section, look at all the data you collected to figure out what relates significantly to your hypothesis. You’ll want to highlight this material in your Results section. Resist the urge to include every bit of data you collected, since perhaps not all are relevant. Also, don’t try to draw conclusions about the results—save them for the Discussion section. In this section, you’re reporting facts. Nothing your readers can dispute should appear in the Results section.

Most Results sections feature three distinct parts: text, tables, and figures. Let’s consider each part one at a time.

This should be a short paragraph, generally just a few lines, that describes the results you obtained from your experiment. In a relatively simple experiment, one that doesn’t produce a lot of data for you to repeat, the text can represent the entire Results section. Don’t feel that you need to include lots of extraneous detail to compensate for a short (but effective) text; your readers appreciate discrimination more than your ability to recite facts. In a more complex experiment, you may want to use tables and/or figures to help guide your readers toward the most important information you gathered. In that event, you’ll need to refer to each table or figure directly, where appropriate:

“Table 1 lists the rates of solubility for each substance”

“Solubility increased as the temperature of the solution increased (see Figure 1).”

If you do use tables or figures, make sure that you don’t present the same material in both the text and the tables/figures, since in essence you’ll just repeat yourself, probably annoying your readers with the redundancy of your statements.

Feel free to describe trends that emerge as you examine the data. Although identifying trends requires some judgment on your part and so may not feel like factual reporting, no one can deny that these trends do exist, and so they properly belong in the Results section. Example:

“Heating the solution increased the rate of solubility of polar solids by 45% but had no effect on the rate of solubility in solutions containing non-polar solids.”

This point isn’t debatable—you’re just pointing out what the data show.

As in the Materials and Methods section, you want to refer to your data in the past tense, because the events you recorded have already occurred and have finished occurring. In the example above, note the use of “increased” and “had,” rather than “increases” and “has.” (You don’t know from your experiment that heating always increases the solubility of polar solids, but it did that time.)

You shouldn’t put information in the table that also appears in the text. You also shouldn’t use a table to present irrelevant data, just to show you did collect these data during the experiment. Tables are good for some purposes and situations, but not others, so whether and how you’ll use tables depends upon what you need them to accomplish.

Tables are useful ways to show variation in data, but not to present a great deal of unchanging measurements. If you’re dealing with a scientific phenomenon that occurs only within a certain range of temperatures, for example, you don’t need to use a table to show that the phenomenon didn’t occur at any of the other temperatures. How useful is this table?

As you can probably see, no solubility was observed until the trial temperature reached 50°C, a fact that the text part of the Results section could easily convey. The table could then be limited to what happened at 50°C and higher, thus better illustrating the differences in solubility rates when solubility did occur.

As a rule, try not to use a table to describe any experimental event you can cover in one sentence of text. Here’s an example of an unnecessary table from How to Write and Publish a Scientific Paper , by Robert A. Day:

As Day notes, all the information in this table can be summarized in one sentence: “S. griseus, S. coelicolor, S. everycolor, and S. rainbowenski grew under aerobic conditions, whereas S. nocolor and S. greenicus required anaerobic conditions.” Most readers won’t find the table clearer than that one sentence.

When you do have reason to tabulate material, pay attention to the clarity and readability of the format you use. Here are a few tips:

• Number your table. Then, when you refer to the table in the text, use that number to tell your readers which table they can review to clarify the material.
• Give your table a title. This title should be descriptive enough to communicate the contents of the table, but not so long that it becomes difficult to follow. The titles in the sample tables above are acceptable.
• Arrange your table so that readers read vertically, not horizontally. For the most part, this rule means that you should construct your table so that like elements read down, not across. Think about what you want your readers to compare, and put that information in the column (up and down) rather than in the row (across). Usually, the point of comparison will be the numerical data you collect, so especially make sure you have columns of numbers, not rows.Here’s an example of how drastically this decision affects the readability of your table (from A Short Guide to Writing about Chemistry , by Herbert Beall and John Trimbur). Look at this table, which presents the relevant data in horizontal rows:

It’s a little tough to see the trends that the author presumably wants to present in this table. Compare this table, in which the data appear vertically:

The second table shows how putting like elements in a vertical column makes for easier reading. In this case, the like elements are the measurements of length and height, over five trials–not, as in the first table, the length and height measurements for each trial.

• Make sure to include units of measurement in the tables. Readers might be able to guess that you measured something in millimeters, but don’t make them try.

• Don’t use vertical lines as part of the format for your table. This convention exists because journals prefer not to have to reproduce these lines because the tables then become more expensive to print. Even though it’s fairly unlikely that you’ll be sending your Biology 11 lab report to Science for publication, your readers still have this expectation. Consequently, if you use the table-drawing option in your word-processing software, choose the option that doesn’t rely on a “grid” format (which includes vertical lines).

How do I include figures in my report?

Although tables can be useful ways of showing trends in the results you obtained, figures (i.e., illustrations) can do an even better job of emphasizing such trends. Lab report writers often use graphic representations of the data they collected to provide their readers with a literal picture of how the experiment went.

When should you use a figure?

Remember the circumstances under which you don’t need a table: when you don’t have a great deal of data or when the data you have don’t vary a lot. Under the same conditions, you would probably forgo the figure as well, since the figure would be unlikely to provide your readers with an additional perspective. Scientists really don’t like their time wasted, so they tend not to respond favorably to redundancy.

If you’re trying to decide between using a table and creating a figure to present your material, consider the following a rule of thumb. The strength of a table lies in its ability to supply large amounts of exact data, whereas the strength of a figure is its dramatic illustration of important trends within the experiment. If you feel that your readers won’t get the full impact of the results you obtained just by looking at the numbers, then a figure might be appropriate.

Of course, an undergraduate class may expect you to create a figure for your lab experiment, if only to make sure that you can do so effectively. If this is the case, then don’t worry about whether to use figures or not—concentrate instead on how best to accomplish your task.

Figures can include maps, photographs, pen-and-ink drawings, flow charts, bar graphs, and section graphs (“pie charts”). But the most common figure by far, especially for undergraduates, is the line graph, so we’ll focus on that type in this handout.

At the undergraduate level, you can often draw and label your graphs by hand, provided that the result is clear, legible, and drawn to scale. Computer technology has, however, made creating line graphs a lot easier. Most word-processing software has a number of functions for transferring data into graph form; many scientists have found Microsoft Excel, for example, a helpful tool in graphing results. If you plan on pursuing a career in the sciences, it may be well worth your while to learn to use a similar program.

Computers can’t, however, decide for you how your graph really works; you have to know how to design your graph to meet your readers’ expectations. Here are some of these expectations:

• Keep it as simple as possible. You may be tempted to signal the complexity of the information you gathered by trying to design a graph that accounts for that complexity. But remember the purpose of your graph: to dramatize your results in a manner that’s easy to see and grasp. Try not to make the reader stare at the graph for a half hour to find the important line among the mass of other lines. For maximum effectiveness, limit yourself to three to five lines per graph; if you have more data to demonstrate, use a set of graphs to account for it, rather than trying to cram it all into a single figure.
• Plot the independent variable on the horizontal (x) axis and the dependent variable on the vertical (y) axis. Remember that the independent variable is the condition that you manipulated during the experiment and the dependent variable is the condition that you measured to see if it changed along with the independent variable. Placing the variables along their respective axes is mostly just a convention, but since your readers are accustomed to viewing graphs in this way, you’re better off not challenging the convention in your report.
• Label each axis carefully, and be especially careful to include units of measure. You need to make sure that your readers understand perfectly well what your graph indicates.
• Number and title your graphs. As with tables, the title of the graph should be informative but concise, and you should refer to your graph by number in the text (e.g., “Figure 1 shows the increase in the solubility rate as a function of temperature”).
• Many editors of professional scientific journals prefer that writers distinguish the lines in their graphs by attaching a symbol to them, usually a geometric shape (triangle, square, etc.), and using that symbol throughout the curve of the line. Generally, readers have a hard time distinguishing dotted lines from dot-dash lines from straight lines, so you should consider staying away from this system. Editors don’t usually like different-colored lines within a graph because colors are difficult and expensive to reproduce; colors may, however, be great for your purposes, as long as you’re not planning to submit your paper to Nature. Use your discretion—try to employ whichever technique dramatizes the results most effectively.
• Try to gather data at regular intervals, so the plot points on your graph aren’t too far apart. You can’t be sure of the arc you should draw between the plot points if the points are located at the far corners of the graph; over a fifteen-minute interval, perhaps the change occurred in the first or last thirty seconds of that period (in which case your straight-line connection between the points is misleading).
• If you’re worried that you didn’t collect data at sufficiently regular intervals during your experiment, go ahead and connect the points with a straight line, but you may want to examine this problem as part of your Discussion section.
• Make your graph large enough so that everything is legible and clearly demarcated, but not so large that it either overwhelms the rest of the Results section or provides a far greater range than you need to illustrate your point. If, for example, the seedlings of your plant grew only 15 mm during the trial, you don’t need to construct a graph that accounts for 100 mm of growth. The lines in your graph should more or less fill the space created by the axes; if you see that your data is confined to the lower left portion of the graph, you should probably re-adjust your scale.
• If you create a set of graphs, make them the same size and format, including all the verbal and visual codes (captions, symbols, scale, etc.). You want to be as consistent as possible in your illustrations, so that your readers can easily make the comparisons you’re trying to get them to see.

How do I write a strong Discussion section?

The discussion section is probably the least formalized part of the report, in that you can’t really apply the same structure to every type of experiment. In simple terms, here you tell your readers what to make of the Results you obtained. If you have done the Results part well, your readers should already recognize the trends in the data and have a fairly clear idea of whether your hypothesis was supported. Because the Results can seem so self-explanatory, many students find it difficult to know what material to add in this last section.

Basically, the Discussion contains several parts, in no particular order, but roughly moving from specific (i.e., related to your experiment only) to general (how your findings fit in the larger scientific community). In this section, you will, as a rule, need to:

Explain whether the data support your hypothesis

• Acknowledge any anomalous data or deviations from what you expected

Derive conclusions, based on your findings, about the process you’re studying

• Relate your findings to earlier work in the same area (if you can)

Explore the theoretical and/or practical implications of your findings

Let’s look at some dos and don’ts for each of these objectives.

This statement is usually a good way to begin the Discussion, since you can’t effectively speak about the larger scientific value of your study until you’ve figured out the particulars of this experiment. You might begin this part of the Discussion by explicitly stating the relationships or correlations your data indicate between the independent and dependent variables. Then you can show more clearly why you believe your hypothesis was or was not supported. For example, if you tested solubility at various temperatures, you could start this section by noting that the rates of solubility increased as the temperature increased. If your initial hypothesis surmised that temperature change would not affect solubility, you would then say something like,

“The hypothesis that temperature change would not affect solubility was not supported by the data.”

Note: Students tend to view labs as practical tests of undeniable scientific truths. As a result, you may want to say that the hypothesis was “proved” or “disproved” or that it was “correct” or “incorrect.” These terms, however, reflect a degree of certainty that you as a scientist aren’t supposed to have. Remember, you’re testing a theory with a procedure that lasts only a few hours and relies on only a few trials, which severely compromises your ability to be sure about the “truth” you see. Words like “supported,” “indicated,” and “suggested” are more acceptable ways to evaluate your hypothesis.

Also, recognize that saying whether the data supported your hypothesis or not involves making a claim to be defended. As such, you need to show the readers that this claim is warranted by the evidence. Make sure that you’re very explicit about the relationship between the evidence and the conclusions you draw from it. This process is difficult for many writers because we don’t often justify conclusions in our regular lives. For example, you might nudge your friend at a party and whisper, “That guy’s drunk,” and once your friend lays eyes on the person in question, she might readily agree. In a scientific paper, by contrast, you would need to defend your claim more thoroughly by pointing to data such as slurred words, unsteady gait, and the lampshade-as-hat. In addition to pointing out these details, you would also need to show how (according to previous studies) these signs are consistent with inebriation, especially if they occur in conjunction with one another. To put it another way, tell your readers exactly how you got from point A (was the hypothesis supported?) to point B (yes/no).

Acknowledge any anomalous data, or deviations from what you expected

You need to take these exceptions and divergences into account, so that you qualify your conclusions sufficiently. For obvious reasons, your readers will doubt your authority if you (deliberately or inadvertently) overlook a key piece of data that doesn’t square with your perspective on what occurred. In a more philosophical sense, once you’ve ignored evidence that contradicts your claims, you’ve departed from the scientific method. The urge to “tidy up” the experiment is often strong, but if you give in to it you’re no longer performing good science.

Sometimes after you’ve performed a study or experiment, you realize that some part of the methods you used to test your hypothesis was flawed. In that case, it’s OK to suggest that if you had the chance to conduct your test again, you might change the design in this or that specific way in order to avoid such and such a problem. The key to making this approach work, though, is to be very precise about the weakness in your experiment, why and how you think that weakness might have affected your data, and how you would alter your protocol to eliminate—or limit the effects of—that weakness. Often, inexperienced researchers and writers feel the need to account for “wrong” data (remember, there’s no such animal), and so they speculate wildly about what might have screwed things up. These speculations include such factors as the unusually hot temperature in the room, or the possibility that their lab partners read the meters wrong, or the potentially defective equipment. These explanations are what scientists call “cop-outs,” or “lame”; don’t indicate that the experiment had a weakness unless you’re fairly certain that a) it really occurred and b) you can explain reasonably well how that weakness affected your results.

If, for example, your hypothesis dealt with the changes in solubility at different temperatures, then try to figure out what you can rationally say about the process of solubility more generally. If you’re doing an undergraduate lab, chances are that the lab will connect in some way to the material you’ve been covering either in lecture or in your reading, so you might choose to return to these resources as a way to help you think clearly about the process as a whole.

This part of the Discussion section is another place where you need to make sure that you’re not overreaching. Again, nothing you’ve found in one study would remotely allow you to claim that you now “know” something, or that something isn’t “true,” or that your experiment “confirmed” some principle or other. Hesitate before you go out on a limb—it’s dangerous! Use less absolutely conclusive language, including such words as “suggest,” “indicate,” “correspond,” “possibly,” “challenge,” etc.

Relate your findings to previous work in the field (if possible)

We’ve been talking about how to show that you belong in a particular community (such as biologists or anthropologists) by writing within conventions that they recognize and accept. Another is to try to identify a conversation going on among members of that community, and use your work to contribute to that conversation. In a larger philosophical sense, scientists can’t fully understand the value of their research unless they have some sense of the context that provoked and nourished it. That is, you have to recognize what’s new about your project (potentially, anyway) and how it benefits the wider body of scientific knowledge. On a more pragmatic level, especially for undergraduates, connecting your lab work to previous research will demonstrate to the TA that you see the big picture. You have an opportunity, in the Discussion section, to distinguish yourself from the students in your class who aren’t thinking beyond the barest facts of the study. Capitalize on this opportunity by putting your own work in context.

If you’re just beginning to work in the natural sciences (as a first-year biology or chemistry student, say), most likely the work you’ll be doing has already been performed and re-performed to a satisfactory degree. Hence, you could probably point to a similar experiment or study and compare/contrast your results and conclusions. More advanced work may deal with an issue that is somewhat less “resolved,” and so previous research may take the form of an ongoing debate, and you can use your own work to weigh in on that debate. If, for example, researchers are hotly disputing the value of herbal remedies for the common cold, and the results of your study suggest that Echinacea diminishes the symptoms but not the actual presence of the cold, then you might want to take some time in the Discussion section to recapitulate the specifics of the dispute as it relates to Echinacea as an herbal remedy. (Consider that you have probably already written in the Introduction about this debate as background research.)

This information is often the best way to end your Discussion (and, for all intents and purposes, the report). In argumentative writing generally, you want to use your closing words to convey the main point of your writing. This main point can be primarily theoretical (“Now that you understand this information, you’re in a better position to understand this larger issue”) or primarily practical (“You can use this information to take such and such an action”). In either case, the concluding statements help the reader to comprehend the significance of your project and your decision to write about it.

Since a lab report is argumentative—after all, you’re investigating a claim, and judging the legitimacy of that claim by generating and collecting evidence—it’s often a good idea to end your report with the same technique for establishing your main point. If you want to go the theoretical route, you might talk about the consequences your study has for the field or phenomenon you’re investigating. To return to the examples regarding solubility, you could end by reflecting on what your work on solubility as a function of temperature tells us (potentially) about solubility in general. (Some folks consider this type of exploration “pure” as opposed to “applied” science, although these labels can be problematic.) If you want to go the practical route, you could end by speculating about the medical, institutional, or commercial implications of your findings—in other words, answer the question, “What can this study help people to do?” In either case, you’re going to make your readers’ experience more satisfying, by helping them see why they spent their time learning what you had to teach them.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

American Psychological Association. 2010. Publication Manual of the American Psychological Association . 6th ed. Washington, DC: American Psychological Association.

Beall, Herbert, and John Trimbur. 2001. A Short Guide to Writing About Chemistry , 2nd ed. New York: Longman.

Blum, Deborah, and Mary Knudson. 1997. A Field Guide for Science Writers: The Official Guide of the National Association of Science Writers . New York: Oxford University Press.

Booth, Wayne C., Gregory G. Colomb, Joseph M. Williams, Joseph Bizup, and William T. FitzGerald. 2016. The Craft of Research , 4th ed. Chicago: University of Chicago Press.

Briscoe, Mary Helen. 1996. Preparing Scientific Illustrations: A Guide to Better Posters, Presentations, and Publications , 2nd ed. New York: Springer-Verlag.

Council of Science Editors. 2014. Scientific Style and Format: The CSE Manual for Authors, Editors, and Publishers , 8th ed. Chicago & London: University of Chicago Press.

Davis, Martha. 2012. Scientific Papers and Presentations , 3rd ed. London: Academic Press.

Day, Robert A. 1994. How to Write and Publish a Scientific Paper , 4th ed. Phoenix: Oryx Press.

Porush, David. 1995. A Short Guide to Writing About Science . New York: Longman.

Williams, Joseph, and Joseph Bizup. 2017. Style: Lessons in Clarity and Grace , 12th ed. Boston: Pearson.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Lab Report Format: Step-by-Step Guide & Examples

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

In psychology, a lab report outlines a study’s objectives, methods, results, discussion, and conclusions, ensuring clarity and adherence to APA (or relevant) formatting guidelines.

A typical lab report would include the following sections: title, abstract, introduction, method, results, and discussion.

The title page, abstract, references, and appendices are started on separate pages (subsections from the main body of the report are not). Use double-line spacing of text, font size 12, and include page numbers.

The report should have a thread of arguments linking the prediction in the introduction to the content of the discussion.

This must indicate what the study is about. It must include the variables under investigation. It should not be written as a question.

Title pages should be formatted in APA style .

The abstract provides a concise and comprehensive summary of a research report. Your style should be brief but not use note form. Look at examples in journal articles . It should aim to explain very briefly (about 150 words) the following:

• Start with a one/two sentence summary, providing the aim and rationale for the study.
• Describe participants and setting: who, when, where, how many, and what groups?
• Describe the method: what design, what experimental treatment, what questionnaires, surveys, or tests were used.
• Describe the major findings, including a mention of the statistics used and the significance levels, or simply one sentence summing up the outcome.
• The final sentence(s) outline the study’s “contribution to knowledge” within the literature. What does it all mean? Mention the implications of your findings if appropriate.

The abstract comes at the beginning of your report but is written at the end (as it summarises information from all the other sections of the report).

Introduction

The purpose of the introduction is to explain where your hypothesis comes from (i.e., it should provide a rationale for your research study).

Ideally, the introduction should have a funnel structure: Start broad and then become more specific. The aims should not appear out of thin air; the preceding review of psychological literature should lead logically into the aims and hypotheses.

• Start with general theory, briefly introducing the topic. Define the important key terms.
• Explain the theoretical framework.
• Summarise and synthesize previous studies – What was the purpose? Who were the participants? What did they do? What did they find? What do these results mean? How do the results relate to the theoretical framework?
• Rationale: How does the current study address a gap in the literature? Perhaps it overcomes a limitation of previous research.
• Aims and hypothesis. Write a paragraph explaining what you plan to investigate and make a clear and concise prediction regarding the results you expect to find.

There should be a logical progression of ideas that aids the flow of the report. This means the studies outlined should lead logically to your aims and hypotheses.

Do be concise and selective, and avoid the temptation to include anything in case it is relevant (i.e., don’t write a shopping list of studies).

USE THE FOLLOWING SUBHEADINGS:

Participants

• How many participants were recruited?
• Say how you obtained your sample (e.g., opportunity sample).
• Give relevant demographic details (e.g., gender, ethnicity, age range, mean age, and standard deviation).
• State the experimental design .
• What were the independent and dependent variables ? Make sure the independent variable is labeled and name the different conditions/levels.
• For example, if gender is the independent variable label, then male and female are the levels/conditions/groups.
• How were the IV and DV operationalized?
• Identify any controls used, e.g., counterbalancing and control of extraneous variables.
• List all the materials and measures (e.g., what was the title of the questionnaire? Was it adapted from a study?).
• You do not need to include wholesale replication of materials – instead, include a ‘sensible’ (illustrate) level of detail. For example, give examples of questionnaire items.
• Include the reliability (e.g., alpha values) for the measure(s).
• Describe the precise procedure you followed when conducting your research, i.e., exactly what you did.
• Describe in sufficient detail to allow for replication of findings.
• Be concise in your description and omit extraneous/trivial details, e.g., you don’t need to include details regarding instructions, debrief, record sheets, etc.
• Assume the reader has no knowledge of what you did and ensure that he/she can replicate (i.e., copy) your study exactly by what you write in this section.
• Write in the past tense.
• Don’t justify or explain in the Method (e.g., why you chose a particular sampling method); just report what you did.
• Only give enough detail for someone to replicate the experiment – be concise in your writing.
• The results section of a paper usually presents descriptive statistics followed by inferential statistics.
• Report the means, standard deviations, and 95% confidence intervals (CIs) for each IV level. If you have four to 20 numbers to present, a well-presented table is best, APA style.
• Name the statistical test being used.
• Report appropriate statistics (e.g., t-scores, p values ).
• Report the magnitude (e.g., are the results significant or not?) as well as the direction of the results (e.g., which group performed better?).
• It is optional to report the effect size (this does not appear on the SPSS output).
• Avoid interpreting the results (save this for the discussion).
• Make sure the results are presented clearly and concisely. A table can be used to display descriptive statistics if this makes the data easier to understand.
• DO NOT include any raw data.
• Follow APA style.

Use APA Style

• Numbers reported to 2 d.p. (incl. 0 before the decimal if 1.00, e.g., “0.51”). The exceptions to this rule: Numbers which can never exceed 1.0 (e.g., p -values, r-values): report to 3 d.p. and do not include 0 before the decimal place, e.g., “.001”.
• Percentages and degrees of freedom: report as whole numbers.
• Statistical symbols that are not Greek letters should be italicized (e.g., M , SD , t , X 2 , F , p , d ).
• Include spaces on either side of the equals sign.
• When reporting 95%, CIs (confidence intervals), upper and lower limits are given inside square brackets, e.g., “95% CI [73.37, 102.23]”
• Outline your findings in plain English (avoid statistical jargon) and relate your results to your hypothesis, e.g., is it supported or rejected?
• Compare your results to background materials from the introduction section. Are your results similar or different? Discuss why/why not.
• How confident can we be in the results? Acknowledge limitations, but only if they can explain the result obtained. If the study has found a reliable effect, be very careful suggesting limitations as you are doubting your results. Unless you can think of any c onfounding variable that can explain the results instead of the IV, it would be advisable to leave the section out.
• Suggest constructive ways to improve your study if appropriate.
• What are the implications of your findings? Say what your findings mean for how people behave in the real world.
• Suggest an idea for further research triggered by your study, something in the same area but not simply an improved version of yours. Perhaps you could base this on a limitation of your study.
• Concluding paragraph – Finish with a statement of your findings and the key points of the discussion (e.g., interpretation and implications) in no more than 3 or 4 sentences.

Reference Page

The reference section lists all the sources cited in the essay (alphabetically). It is not a bibliography (a list of the books you used).

In simple terms, every time you refer to a psychologist’s name (and date), you need to reference the original source of information.

If you have been using textbooks this is easy as the references are usually at the back of the book and you can just copy them down. If you have been using websites then you may have a problem as they might not provide a reference section for you to copy.

References need to be set out APA style :

Author, A. A. (year). Title of work . Location: Publisher.

Journal Articles

Author, A. A., Author, B. B., & Author, C. C. (year). Article title. Journal Title, volume number (issue number), page numbers

A simple way to write your reference section is to use Google scholar . Just type the name and date of the psychologist in the search box and click on the “cite” link.

Next, copy and paste the APA reference into the reference section of your essay.

Once again, remember that references need to be in alphabetical order according to surname.

Psychology Lab Report Example

Quantitative paper template.

Quantitative professional paper template: Adapted from “Fake News, Fast and Slow: Deliberation Reduces Belief in False (but Not True) News Headlines,” by B. Bago, D. G. Rand, and G. Pennycook, 2020,  Journal of Experimental Psychology: General ,  149 (8), pp. 1608–1613 ( https://doi.org/10.1037/xge0000729 ). Copyright 2020 by the American Psychological Association.

Qualitative paper template

Qualitative professional paper template: Adapted from “‘My Smartphone Is an Extension of Myself’: A Holistic Qualitative Exploration of the Impact of Using a Smartphone,” by L. J. Harkin and D. Kuss, 2020,  Psychology of Popular Media ,  10 (1), pp. 28–38 ( https://doi.org/10.1037/ppm0000278 ). Copyright 2020 by the American Psychological Association.