how to create table of contents in thesis

• How it works

How to Create the Best Table of Contents for a Dissertation

Published by Owen Ingram at August 12th, 2021 , Revised On September 20, 2023

“A table of contents is an essential part of any article, book, proceedings, essay , and paper with plenty of information. It requires providing the reader’s guidance about the position of the content.”

When preparing a  dissertation , you may cram as much information into it as appropriate. The dissertation may be an extremely well-written one with a lot of valuable information to offer. Still, all that information could become perplexing if the reader cannot easily find the information.

The length of dissertations usually varies from a few pages to a few hundred pages, making it very difficult to find information that you may be after.

Instead of skimming through every page of the dissertation, there is a need for a guideline that directs the reader to the correct section of the dissertation and, more importantly, the correct page in the section.

Also read:   The List of Figures and Tables in the Dissertation .

What is the Table of Contents in the Dissertation?

The table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents.

Depending on the detail level in a table of contents, the most useful headings are listed to provide the reader concerning which page the said information may be found.

The table of contents is essentially a list found at the beginning of a  dissertation , which contains names of the chapters, section titles and/or very brief descriptions, and page numbers indicated for each.

This allows the reader to look at the table of contents to locate the information needed from the dissertation. Having an effective table of contents is key to providing a seamless reading experience to the reader.

Here in this article, we will uncover every piece of information you need to know to write the dissertation’s abstract.

This article helps the readers on how to create the best table of contents for the dissertation. An important thing to note is that this guide discusses creating a table of contents in Microsoft Word.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

Styles for Dissertation Table of Contents

Making an effective table of contents starts with identifying headings and designating styles to those headings.

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents .

Each heading style already has predefined sizes, fonts, colours, spacing, etc. but can be changed as per the user’s requirements. This also helps once all headings have been created and you intend to change the style of a certain type of heading.

All that is needed to change the style of a type of heading is automatically reflected on all headings that use the style.

Below is how the styles menu looks like;

To allocate a style to a heading, first select a heading and then click on one of the styles in the ‘Styles’ menu. Doing so converts the selected heading to the style that is selected in the Styles menu.

You can style a similar heading level in the same style by selecting each heading and then clicking on the style in the Style menu.

It is important to note that it greatly helps and saves time if you allocate styles systematically, i.e., you allocate the style as you write.

The styles are not limited to headings only but can be used for paragraphs and by selecting the whole paragraph and applying a style to it.

Changing Appearance of Pre-Defined Styles

To change the appearance of a style to one that suits you,

• You would need to right-click on one of the styles to open a drop-down menu.

• Select ‘Modify’ from the menu. This would display a window with various formatting and appearance options. You can select the most appropriate ones and click ‘OK.’ The change that you made to the style reflects on all headings or paragraphs that use this style.

Further changes can be made to headings, but using styles is an important step for creating the table of contents for the thesis. Once this step is completed, you can continue to create a thesis table of contents.

Also Read:  What is Appendix in Dissertation?

Things to Consider when Making APA Style Table of Contents

• The pages before the body of the dissertation, known as the ‘Prefatory Pages,’ should not have page numbers on them but should be numbered in the Roman Numerals instead as (i, ii, iii…).
• Table of Contents and the Abstract pages are not to contain any numbers.
• The remaining pages would carry the standard page numbers (1,2,3…).
• The section titles and page numbers in the dissertation table of contents should have dotted lines between them.
• All the Prefatory pages, Sections, Chapter Titles, Headings, Sub Headings, Reference Sections, and Appendices should be listed in the contents’ thesis table. If there are a limited number of Tables or Figures, they may be listed in the dissertation’s table contents.
• If there are many figures, tables, symbols, or abbreviations, a List of Tables, List of Figures , List of Symbols, and List of Abbreviations should be made for easy navigation. These lists, however, should not be listed in the thesis table of contents.
• The thesis/dissertation must be divided into sections even if it is not divided into chapters, with all sections being listed in the table of contents for the thesis.

Generating Dissertation Table of Contents

First, to generate the Table of Contents, start by entering a blank page after the pages you need the table of contents to follow.

• To do so, click on the bottom of the page you want before the Table of Contents.
• Open the ‘Insert’ tab and select ‘Page Break’.
• This will create a page between the top and bottom sections of the Table of Contents area.

By the time you reach this section, you would have given each heading or sub-heading a dedicated style, distinguishing between different types of headings. Microsoft Word can automatically generate a Table of Contents, but the document, particularly the headings, needs to be formatted according to styles for this feature to work. You can assign different headings levels, different styles for Microsoft Word to recognize the level of heading.

How to Insert Table of Contents

• Place the cursor where you want to place the Table of Contents on the page you added earlier.
• On the ‘References’ tab, open the Table of Contents group. This would open a list of different Table of Contents designs and a  table of contents sample.

• You can select an option from the available Table of Contents or make a Custom Table of Contents. Although the available Table of Contents samples is appropriate, you may use a custom table of contents if it is more suitable to your needs. This allows you to modify different formatting options for the Table of Contents to satisfy your own

Updating the Table of Contents

As you proceed with editing your dissertation, the changes cause the page numbers and headings to vary. Often, people fail to incorporate those changes into the Table of Contents, which then effectively serves as an incorrect table and causes confusion.

It is thus important to update the changes into the table of contents as the final step once you have made all the necessary changes in the dissertation and are ready to print it.

These changes may alter the length of the  thesis table of contents , which may also cause the dissertation’s formatting to be altered a little, so it is best to reformat it after updating the table of contents.

To update the table of contents,

• Select ‘Update Table’ in the References tab.
• This would open a dialogue box. Select ‘Update Entire Table’ to ensure that all changes are reflected in the contents table and not just the page numbers. This would display all changes and additions you have made to the document (Anon., 2017).

Using this guide, you should understand how to create the best table of contents for the dissertation. The use of a Table of Contents, while being important for most written work, is even more critical for dissertations, especially when the proper methodology of creating the table of contents is followed.

This includes the guidelines that must be considered to correctly format the table of contents so that it may be shaped so that it follows the norms and is effective at helping the reader navigate through the content of the dissertation.

The use of Microsoft Word’s Table of Contents generation feature has greatly helped people worldwide create, edit, and update the table of contents of their dissertations with ease.

Here in this article, we will uncover every piece of information you need to know  how to write the dissertation’s abstract .

Are you in need of help with dissertation writing? At ResearchProspect, we have hundreds of Master’s and PhD qualified writers for all academic subjects, so you can get help with any aspect of your dissertation project. You can place your order for a proposal ,  full dissertation paper , or  individual chapters .

Is it essential to add a table of content to the dissertation?

Yes, it is important to add a table of content in a dissertation .

How to make an effective table of contents for the dissertation?

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents.

How do I update the table of contents?

You may also like.

How to Structure a Dissertation or Thesis Need interesting and manageable Finance and Accounting dissertation topics? Here are the trending Media dissertation titles so you can choose one most suitable to your needs.

Dissertation discussion is where you explore the relevance and significance of results. Here are guidelines to help you write the perfect discussion chapter.

This brief introductory section aims to deal with the definitions of two paradigms, positivism and post-positivism, as well as their importance in research.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to create a table of contents for a dissertation (apa), published by steve tippins on june 20, 2022 june 20, 2022.

Last Updated on: 7th June 2024, 05:08 am

APA Dissertation Table of Contents Format Guidelines

• The table of contents should be double spaced with one-inch margins on all sides. 
• It should be written in the same font and size as the rest of your dissertation.  
• At the top of the page, write Table of Contents , centered and in bold.
• Although in the body of the paper you can use up to five levels of headings, up to three levels are usually provided in the Table of Contents. Including lower-level headings is optional. 
• Indent each subheading five spaces. 
• Write all text in title case. In title case, the first letter of major words is capitalized.
• Provide the page number where the main headings and subheadings begin, and provide dotted lines between the heading and the page number.
• Page numbers for the Dedication, Acknowledgements, and Preface should be in lower case Roman Numbers (i, v, x, l, c, d and m.). The page numbers for the rest of the text should be in Arabic numerals (1,2, 3, 4, etc.).

How to Write a Dissertation Table of Contents in APA Using Microsoft Word

Step 1. Instead of manually trying to write and format the table of contents, you can create a generated one using Microsoft Word. To do this, first go to the Home tab. This is where you will choose the styles for the table of contents. 

Step 2. The top-level headings will be your chapter titles, so on the right side of the tab, apply the Heading 1 style. 

Step 3. The second-level headings will be your subheadings, so apply the Heading 2 style. This will place your subheadings underneath your main headings.

Step 4. You will now produce page links to your document. In the top ribbon, click on the References tab and select Table of Contents . 

Step 5. If the style does not indicate APA, such as the one below, use the drop down arrow to select APA. 

Step 6. Next, choose the number of levels that you want. In this case, you want to be able to have up to three levels, so choose Automatic Table 2 , which has the appropriate heading for a dissertation. 

Step 7. Click ok , and you are all set. Microsoft word will automatically generate your dissertation’s table of contents as you write it.

List of Tables and Figures

Your list of tables and figures will be written at the end of the list of information in the body of your paper. You will create these lists the same way that you created the main table of contents. 

However, the headings will be different. 

Instead of the heading “Table of Contents,” the headings will be “List of Tables” and “List of Figures.” (An example is provided in the table of contents example below.)

Sample of a Dissertation Table of Contents

In the example below, there are three level headings. The list of tables and figures are provided at the bottom of the other contents. The sections in your table of contents may be different depending on your college’s requirements. 

Updating the Dissertation Table of Contents

As you continue working on your dissertation, you will need to update the page numbers because they may change. 

To update the page numbers, right-click on the table of contents in your document and select the Update field . Then, the Update Table of Contents box will appear. 

You can choose to Update page numbers only or all the information in the table of contents by clicking on Update entire table . 

Note: For more information, refer to the APA Manual 7 th edition , sections 2.2-2.27.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Structure the Table of Contents for a Research Paper

4-minute read

• 16th July 2023

So you’ve made it to the important step of writing the table of contents for your paper. Congratulations on making it this far! Whether you’re writing a research paper or a dissertation , the table of contents not only provides the reader with guidance on where to find the sections of your paper, but it also signals that a quality piece of research is to follow. Here, we will provide detailed instructions on how to structure the table of contents for your research paper.

Steps to Create a Table of Contents

• Insert the table of contents after the title page.

Within the structure of your research paper , you should place the table of contents after the title page but before the introduction or the beginning of the content. If your research paper includes an abstract or an acknowledgements section , place the table of contents after it.

• List all the paper’s sections and subsections in chronological order.

Depending on the complexity of your paper, this list will include chapters (first-level headings), chapter sections (second-level headings), and perhaps subsections (third-level headings). If you have a chapter outline , it will come in handy during this step. You should include the bibliography and all appendices in your table of contents. If you have more than a few charts and figures (more often the case in a dissertation than in a research paper), you should add them to a separate list of charts and figures that immediately follows the table of contents. (Check out our FAQs below for additional guidance on items that should not be in your table of contents.)

• Paginate each section.

Label each section and subsection with the page number it begins on. Be sure to do a check after you’ve made your final edits to ensure that you don’t need to update the page numbers.

• Format your table of contents.

The way you format your table of contents will depend on the style guide you use for the rest of your paper. For example, there are table of contents formatting guidelines for Turabian/Chicago and MLA styles, and although the APA recommends checking with your instructor for formatting instructions (always a good rule of thumb), you can also create a table of contents for a research paper that follows APA style .

• Add hyperlinks if you like.

Depending on the word processing software you’re using, you may also be able to hyperlink the sections of your table of contents for easier navigation through your paper. (Instructions for this feature are available for both Microsoft Word and Google Docs .)

To summarize, the following steps will help you create a clear and concise table of contents to guide readers through your research paper:

1. Insert the table of contents after the title page.

2. List all the sections and subsections in chronological order.

3. Paginate each section.

4. Format the table of contents according to your style guide.

5. Add optional hyperlinks.

If you’d like help formatting and proofreading your research paper , check out some of our services. You can even submit a sample for free . Best of luck writing your research paper table of contents!

What is a table of contents?

A table of contents is a listing of each section of a document in chronological order, accompanied by the page number where the section begins. A table of contents gives the reader an overview of the contents of a document, as well as providing guidance on where to find each section.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

What should I include in my table of contents?

If your paper contains any of the following sections, they should be included in your table of contents:

●  Chapters, chapter sections, and subsections

●  Introduction

●  Conclusion

●  Appendices

●  Bibliography

Although recommendations may differ among institutions, you generally should not include the following in your table of contents:

●  Title page

●  Abstract

●  Acknowledgements

●  Forward or preface

If you have several charts, figures, or tables, consider creating a separate list for them that will immediately follow the table of contents. Also, you don’t need to include the table of contents itself in your table of contents.

Is there more than one way to format a table of contents?

Yes! In addition to following any recommendations from your instructor or institution, you should follow the stipulations of your style guide .

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

5-minute read

Free Email Newsletter Template (2024)

Promoting a brand means sharing valuable insights to connect more deeply with your audience, and...

6-minute read

How to Write a Nonprofit Grant Proposal

If you’re seeking funding to support your charitable endeavors as a nonprofit organization, you’ll need...

9-minute read

How to Use Infographics to Boost Your Presentation

Is your content getting noticed? Capturing and maintaining an audience’s attention is a challenge when...

8-minute read

Why Interactive PDFs Are Better for Engagement

Are you looking to enhance engagement and captivate your audience through your professional documents? Interactive...

7-minute read

Seven Key Strategies for Voice Search Optimization

Voice search optimization is rapidly shaping the digital landscape, requiring content professionals to adapt their...

Five Creative Ways to Showcase Your Digital Portfolio

Are you a creative freelancer looking to make a lasting impression on potential clients or...

Make sure your writing is the best it can be with our expert English proofreading and editing.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgments
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Table of contents

The Table of Contents should follow these guidelines:

• ​All sections of the manuscript are listed in the Table of Contents except the Title Page, the Copyright Page, the Dedication Page, and the Table of Contents.
• You may list subsections within chapters
• Creative works are not exempt from the requirement to include a Table of Contents

Table of contents example

Here is an example of a Table of Contents page from the Template. Please note that your table of contents may be longer than one page.

• << Previous: Dedication Page
• Next: List of Figures (etc.) >>
• Last Updated: Jul 18, 2024 9:46 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

• KU Libraries
• Subject & Course Guides
• KU Thesis and Dissertation Formatting
• Table of Contents

KU Thesis and Dissertation Formatting: Table of Contents

• Formatting Specifics
• Title and Acceptance Pages
• Fonts and Spacing
• Page Numbering
• List of Figures
• Rotating Charts or Tables
• Working with Footnotes
• Converting to PDF
• Embedding Fonts
• Completed KU Dissertations & Theses
• About: Survey of Earned Doctorates
• Copyright and ETD Release Form
• Resources for KUMC Students
• Thesis/Dissertation Filenames
• LaTeX/BibTeX Support

Office of Graduate Studies Thesis and Dissertation Formatting Guidelines

These rules are taken from the KU Office of Graduate Studies Thesis or Dissertation Formatting Guidelines. To see the full thesis or dissertation formatting requirements, visit https://graduate.ku.edu/submitting

Creating an Automated Table of Contents

Located in the Home tab, Word’s Style Gallery makes it easy to set consistent, one-click formatting for headings throughout your document. It is these style settings that Word uses to create an automatic table of contents. Using an automatic table of contents will save you the huge headache of dealing with dot leaders, spacing, and having to completely re-type your table of contents if the order of your pages changes even a little. Plus, styles are easy to use! Step-by-step how-to instructions are included below for setting heading styles and then inserting a table of contents in Word 2010, Word 2013 or Word 2011 for Mac.

• Printed Instructions (TOC Word 2010)
• Printed Instructions (TOC Word 2013)
• Printed Instructions (TOC Word 2011 for Mac)
• Printed Instructions (TOC Word 2016 Mac)
• Printed Instructions (TOC Word 2016 PC)
• Creating a Manual-Entry Table of Contents

Working with Outline Style (Numbered) Headings

Numbered headings can be very tricky and many citation styles do not require their use. If you are working with a style the does require it, however, Shauna Kelly's blog has some great help .

Subject Guide

• << Previous: Page Numbering
• Next: List of Figures >>
• Last Updated: May 9, 2024 9:48 AM
• URL: https://guides.lib.ku.edu/etd

Graduate College Formatting Guide

• Page Numbers (Microsoft Word)
• Page Numbers (Google Docs)
• Page Breaks and Section Breaks
• Headings, Subheadings, and Table of Contents (Microsoft Word)
• Headings, Subheadings, and Table of Contents (Google Docs)
• Inserting Tables and Figures
• Comments and Track Changes
• References, Bibliography, Works Cited
• Landscape Pages & Special Materials

Setting the Normal Style

Set the "normal" style of font.

Before we can set up headings, we'll need to define the format of the text that  isn't  a heading. The "styles" in word set some default formatting for text. Setting up the "Normal" style will create a default font setting to keep the text uniform throughout the document. The Styles pane is located under the HOME tab.

Right click on the "Normal" style to open the Modify option.

This will open a Modify Style Dialog Box. Start by changing the Paragraph formatting. This is located by selecting the Format drop down in the bottom left of the Dialog Box.

There are two things that should be set under the Paragraph settings. Under the INDENTS AND SPACING tab, check to turn on "Don't add space between paragraphs of the same style." Under the LINE AND PAGE BREAKS tab, check to turn on the "Widow/Orphan Control."

Once both of those have been set and you click "okay," you'll be returned to the Modify Style Dialog Box. Now we can set the font formatting. Select the font you wish to use throughout the document, change the font size to 12 point, ensure the line spacing is double spaced, and select the option to remove space between paragraphs (this is indicated by two lines pointing towards each other).

Adding Headings & Subheadings

Inserting headings and subheadings.

Using the same technique we can create a standard for the various types of headings and subheadings used across the thesis. The Thesis & Dissertation Manual generally follows APA style for heading levels. In order to keep headings consistently correct and link the Table of Contents, the Styles function in Word is used. This is going to show you some examples of the formatting required for the headings and how to use the various heading levels. We'll also see how to use styles and update your Table of Contents. 

Modifying Heading Levels to Match Required Formatting

Level 1 headings.

Chapters will be linked to Heading Level 1. If you choose not to have chapters, you will use level 1 for your major headings (typically: Introduction, Literature Review, Methods, etc.). They should be typed in title case, center aligned, and bold. The number of the chapter can be in Arabic or Roman numerals or spelled out so long as it is consistently done throughout the document. The heading should be on one line, so if you are using chapters, it should look something like this:

Chapter 1: Introduction

Once you have formatted a chapter heading, select the text of the chapter heading then right click on Heading 1 in the Styles pane and select "Update Heading 1 to Match Selection." 

Adding More Level 1 Headings

Once you have formatted the first heading and updated the style, you simply need to type the new level 1 heading in title case and then, with your cursor in line with the heading, click on the heading 1 button in the styles pane to format it and link it for your table of contents. Make sure to use this feature every time to ensure all headings are properly linked to your table of contents.

Level 2 Headings

Subsections of your major headings should be the next level down. Level 2 headings will be left aligned, bold, and title case. They should look like this:

Level 2 Heading

Once you have formatted a level 2 heading, select the text of the heading then right click on Heading 2 in the Styles pane and select "Update Heading 2 to Match Selection." 

Adding More Level 2 Headings

Once you have formatted the first heading and updated the style, you simply need to type the new level 2 heading in title case and then, with your cursor in line with the heading, click on the heading 2 button in the styles pane to format it and link it for your table of contents. Make sure to use this feature every time to ensure all headings are properly linked to your table of contents.

Level 3 Headings

If you wish to further subsection your paper, you will use level 3 headings. Level 3 headings will be bold italic, left aligned, and title case. They should look like this:

Level Three Heading

Once you have formatted a level 3 heading, select the text of the heading then right click on Heading 3 in the Styles pane and select "Update Heading 3 to Match Selection." 

Adding More Level 3 Headings

Once you have formatted the first heading and updated the style, you simply need to type the new level 3 heading in title case and then, with your cursor in line with the heading, click on the heading 3 button in the styles pane to format it and link it for your table of contents. Make sure to use this feature every time to ensure all headings are properly linked to your table of contents.

Level 4 & 5 Headings (and beyond)

It is common to find the first 3 heading levels in papers that are as long as a thesis or dissertation. Occasionally, you may find the need to go beyond those levels. It is important to note that for the thesis and dissertation, only the first 3 headings should be included in the table of contents. It is also recommended that you only use the styles function for the first 3 headings because they stand alone on their own line of text. The next heading levels will begin on the same line as the paragraph that starts that section which means that the style function will not work properly. If you were to link the heading, the entire paragraph will appear in your table of contents.

This means that you will need to, carefully, ensure you are formatting the headings manually. Each level should be consistently formatted the same way. APA has standards for levels 4 & 5 which are described here. For heading levels beyond level 5, you should pick a consistent formatting that clearly indicates they are a subsection of the level 5 heading. It is also recommended that you carefully evaluate if this level of heading is truly necessary for your writing.

Level 4 Heading

Level 4 headings will begin on the same line of the paragraph that makes up the section. It will be indented 0.5", much like a normal paragraph indent. The heading will be in title case and bold font with a period at the end of the heading:

            Level Four Heading Here.  Start the first sentence of the paragraph that follows the heading on the same line and continue typing. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc at pellentesque massa. Sed nec urna nec est efficitur iaculis. Etiam efficitur velit id dignissim eleifend. Duis euismod, nisi sed cursus sodales, sem nisi porttitor ante, eu dignissim justo tortor nec mauris.

Level 5 Heading

Level 5 headings will begin on the same line of the paragraph that makes up the section. It will be indented 0.5", much like a normal paragraph indent. The heading will be in title case and bold italic font with a period at the end of the heading:

            Level Five Heading Here.   Start the first sentence of the paragraph that follows the heading on the same line and continue typing. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc at pellentesque massa. Sed nec urna nec est efficitur iaculis. Etiam efficitur velit id dignissim eleifend. Duis euismod, nisi sed cursus sodales, sem nisi porttitor ante, eu dignissim justo tortor nec mauris.

Table of Contents

Once you have added headings and used the styles feature, you will be able to use the word function to "generate" a table of contents. You will need to type "Table of Contents" in bold font, centered at the top of the page you will be inserting your table of contents onto. Then, place your cursor on the next line

From the References tab, click on Table of Contents and select Custom Table of Contents...

From the pop up window, you will want to change the tab leaders to (none) rather than the default. The rest of the default settings will be fine, so click ok once you've done so.

This will populate your table of contents.

From here, you will need to open the style pane to modify some of the formatting of the table of contents.

You will need to locate TOC 1 and click on it, and select "modify" from the drop down list.

TOC 1 style should be bold. If you've properly set up your "normal style" of font (see above), this should be the only modification to your TOC styles that you need to make. If the text is not properly set up and you need to further format it, you can do so from this window.

If set up correctly, your table of contents should look like the image below.

• << Previous: Page Breaks and Section Breaks
• Next: Headings, Subheadings, and Table of Contents (Google Docs) >>
• Last Updated: Jul 23, 2024 9:44 AM
• URL: https://guides.lib.uni.edu/grad-college-format

• Privacy Policy

Home » Table of Contents – Types, Formats, Examples

Table of Contents – Types, Formats, Examples

Table of Contents

Definition:

Table of contents (TOC) is a list of the headings or sections in a document or book, arranged in the order in which they appear. It serves as a roadmap or guide to the contents of the document, allowing readers to quickly find specific information they are looking for.

A typical table of contents includes chapter titles, section headings, subheadings, and their corresponding page numbers.

The table of contents is usually located at the beginning of the document or book, after the title page and any front matter, such as a preface or introduction.

Table of Contents in Research

In Research, A Table of Contents (TOC) is a structured list of the main sections or chapters of a research paper , Thesis and Dissertation . It provides readers with an overview of the organization and structure of the document, allowing them to quickly locate specific information and navigate through the document.

Importance of Table of Contents

Here are some reasons why a TOC is important:

• Navigation : It serves as a roadmap that helps readers navigate the document easily. By providing a clear and concise overview of the contents, readers can quickly locate the section they need to read without having to search through the entire document.
• Organization : A well-structured TOC reflects the organization of the document. It helps to organize the content logically and categorize it into easily digestible chunks, which makes it easier for readers to understand and follow.
• Clarity : It can help to clarify the document’s purpose, scope, and structure. It provides an overview of the document’s main topics and subtopics, which can help readers to understand the content’s overall message.
• Efficiency : This can save readers time and effort by allowing them to skip to the section they need to read, rather than having to go through the entire document.
• Professionalism : Including a Table of Contents in a document shows that the author has taken the time and effort to organize the content properly. It adds a level of professionalism and credibility to the document.

Types of Table of Contents

There are different types of table of contents depending on the purpose and structure of the document. Here are some examples:

Simple Table of Contents

This is a basic table of contents that lists the major sections or chapters of a document along with their corresponding page numbers.

Example: Table of Contents

I. Introduction …………………………………………. 1

II. Literature Review ………………………………… 3

III. Methodology ……………………………………… 6

IV. Results …………………………………………….. 9

V. Discussion …………………………………………. 12

VI. Conclusion ……………………………………….. 15

Expanded Table of Contents

This type of table of contents provides more detailed information about the contents of each section or chapter, including subsections and subheadings.

A. Background …………………………………….. 1

B. Problem Statement ………………………….. 2

C. Research Questions ……………………….. 3

II. Literature Review ………………………………… 5

A. Theoretical Framework …………………… 5

B. Previous Research ………………………….. 6

C. Gaps and Limitations ……………………… 8 I

II. Methodology ……………………………………… 11

A. Research Design ……………………………. 11

B. Data Collection …………………………….. 12

C. Data Analysis ……………………………….. 13

IV. Results …………………………………………….. 15

A. Descriptive Statistics ……………………… 15

B. Hypothesis Testing …………………………. 17

V. Discussion …………………………………………. 20

A. Interpretation of Findings ……………… 20

B. Implications for Practice ………………… 22

VI. Conclusion ……………………………………….. 25

A. Summary of Findings ……………………… 25

B. Contributions and Recommendations ….. 27

Graphic Table of Contents

This type of table of contents uses visual aids, such as icons or images, to represent the different sections or chapters of a document.

I. Introduction …………………………………………. [image of a light bulb]

II. Literature Review ………………………………… [image of a book]

III. Methodology ……………………………………… [image of a microscope]

IV. Results …………………………………………….. [image of a graph]

V. Discussion …………………………………………. [image of a conversation bubble]

Alphabetical Table of Contents

This type of table of contents lists the different topics or keywords in alphabetical order, along with their corresponding page numbers.

A. Abstract ……………………………………………… 1

B. Background …………………………………………. 3

C. Conclusion …………………………………………. 10

D. Data Analysis …………………………………….. 8

E. Ethics ……………………………………………….. 6

F. Findings ……………………………………………… 7

G. Introduction ……………………………………….. 1

H. Hypothesis ………………………………………….. 5

I. Literature Review ………………………………… 2

J. Methodology ……………………………………… 4

K. Limitations …………………………………………. 9

L. Results ………………………………………………… 7

M. Discussion …………………………………………. 10

Hierarchical Table of Contents

This type of table of contents displays the different levels of headings and subheadings in a hierarchical order, indicating the relative importance and relationship between the different sections.

    A. Background …………………………………….. 2

      B. Purpose of the Study ……………………….. 3

      A. Theoretical Framework …………………… 5

             1. Concept A ……………………………….. 6

                    a. Definition ………………………….. 6

                     b. Example ……………………………. 7

              2. Concept B ……………………………….. 8

       B. Previous Research ………………………….. 9

III. Methodology ……………………………………… 12

       A. Research Design ……………………………. 12

             1. Sample ……………………………………. 13

               2. Procedure ………………………………. 14

       B. Data Collection …………………………….. 15

            1. Instrumentation ……………………….. 16

            2. Validity and Reliability ………………. 17

       C. Data Analysis ……………………………….. 18

          1. Descriptive Statistics …………………… 19

           2. Inferential Statistics ………………….. 20

IV. Result s …………………………………………….. 22

    A. Overview of Findings ……………………… 22

B. Hypothesis Testing …………………………. 23

V. Discussion …………………………………………. 26

A. Interpretation of Findings ………………… 26

B. Implications for Practice ………………… 28

VI. Conclusion ……………………………………….. 31

A. Summary of Findings ……………………… 31

B. Contributions and Recommendations ….. 33

Table of Contents Format

Here’s an example format for a Table of Contents:

I. Introduction

C. Methodology

II. Background

A. Historical Context

B. Literature Review

III. Methodology

A. Research Design

B. Data Collection

C. Data Analysis

IV. Results

A. Descriptive Statistics

B. Inferential Statistics

C. Qualitative Findings

V. Discussion

A. Interpretation of Results

B. Implications for Practice

C. Limitations and Future Research

VI. Conclusion

A. Summary of Findings

B. Contributions to the Field

C. Final Remarks

VII. References

VIII. Appendices

Note : This is just an example format and can vary depending on the type of document or research paper you are writing.

When to use Table of Contents

A TOC can be particularly useful in the following cases:

• Lengthy documents : If the document is lengthy, with several sections and subsections, a Table of contents can help readers quickly navigate the document and find the relevant information.
• Complex documents: If the document is complex, with multiple topics or themes, a TOC can help readers understand the relationships between the different sections and how they are connected.
• Technical documents: If the document is technical, with a lot of jargon or specialized terminology, This can help readers understand the organization of the document and locate the information they need.
• Legal documents: If the document is a legal document, such as a contract or a legal brief, It helps readers quickly locate specific sections or provisions.

How to Make a Table of Contents

Here are the steps to create a table of contents:

• Organize your document: Before you start making a table of contents, organize your document into sections and subsections. Each section should have a clear and descriptive heading that summarizes the content.
• Add heading styles : Use the heading styles in your word processor to format the headings in your document. The heading styles are usually named Heading 1, Heading 2, Heading 3, and so on. Apply the appropriate heading style to each section heading in your document.
• Insert a table of contents: Once you’ve added headings to your document, you can insert a table of contents. In Microsoft Word, go to the References tab, click on Table of Contents, and choose a style from the list. The table of contents will be inserted into your document.
• Update the table of contents: If you make changes to your document, such as adding or deleting sections, you’ll need to update the table of contents. In Microsoft Word, right-click on the table of contents and select Update Field. Choose whether you want to update the page numbers or the entire table, and click OK.

Purpose of Table of Contents

A table of contents (TOC) serves several purposes, including:

• Marketing : It can be used as a marketing tool to entice readers to read a book or document. By highlighting the most interesting or compelling sections, a TOC can give readers a preview of what’s to come and encourage them to dive deeper into the content.
• Accessibility : A TOC can make a document or book more accessible to people with disabilities, such as those who use screen readers or other assistive technologies. By providing a clear and organized overview of the content, a TOC can help these readers navigate the material more easily.
• Collaboration : This can be used as a collaboration tool to help multiple authors or editors work together on a document or book. By providing a shared framework for organizing the content, a TOC can help ensure that everyone is on the same page and working towards the same goals.
• Reference : It can serve as a reference tool for readers who need to revisit specific sections of a document or book. By providing a clear overview of the content and organization, a TOC can help readers quickly locate the information they need, even if they don’t remember exactly where it was located.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Paper – Structure, Examples and Writing...

Research Findings – Types Examples and Writing...

Research Summary – Structure, Examples and...

Future Research – Thesis Guide

Research Paper Outline – Types, Example, Template

Data Interpretation – Process, Methods and...

• Mardigian Library
• Subject Guides

Formatting Your Thesis or Dissertation with Microsoft Word

• Lists of Tables and Figures
• Introduction
• Copyright Page
• Dedication, Acknowledgements, & Preface
• Headings and Subheadings
• Citations and Bibliography
• Page Numbers
• Tables and Figures
• Rotated (Landscape) Pages
• Table of Contents
• List of Abbreviations
• Some Things to Watch For
• PDF with Embedded Fonts

Lists of tables and figures

Just like the table of contents, Microsoft Word can be used to automatically generate both a list of tables and a list of figures. Automatic generation of these lists has the same advantages as automatically generating the table of contents:

• You don't have to manually type the list of tables or the list of figures
• You don't have to go back and edit the lists if any of the figures or tables changes pages. A couple of clicks and Word will automatically update the list of tables or the list of figures for you.

Below is a tutorial demonstrating how to create the list of tables and the list of figures.

• << Previous: Table of Contents
• Next: List of Abbreviations >>
• Last Updated: Jul 23, 2024 5:50 PM
• URL: https://guides.umd.umich.edu/Word_for_Theses

Call us at 313-593-5559

Chat with us

Text us: 313-486-5399

Email us your question

• 4901 Evergreen Road Dearborn, MI 48128, USA
• Phone: 313-593-5000
• Maps & Directions
• M+Google Mail
• Emergency Information
• UM-Dearborn Connect
• Wolverine Access

• University of Michigan Library
• Research Guides

Microsoft Word for Dissertations

• List of Figures/Tables
• Introduction, Template, & Resources
• Formatting for All Readers
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Images, Charts, Other Objects
• Footnotes, Endnotes, & Citations
• Cross-References
• Appendix Figures & Tables
• Table of Contents
• Chapter and Section Numbering
• Page Numbers
• Landscape Pages
• Combining Chapter Files
• Commenting and Reviewing
• Tips & Tricks
• The Two-inch Top Margin
• Troubleshooting
• Finalizing Without Styles
• Preparing Your Final Document
• Take a break

Automatic Lists of Figures and Tables

If you have captioned your figures, tables, and equations using Word’s captioning feature (see the  Captions tab in the left-side navigation of this Guide), you can have Word generate your lists for you automatically.

• In the References tab, click the Insert Table of Figures button  (use this for lists of tables or equations, too).
• In the window that appears, select the label for which you want to make a list from the Caption Label menu (such as "Equation", "Figure", or "Table").
• If you want to change the style of your table of contents (e.g. change the font, or you want more space between each item in the list), click on the Modify button, select the Table of Figures style, then click the Modify button to do so. Click OK when you are done.
• Click OK to insert your table of contents.  

Repeat these steps to insert other lists into your document (Rackham requires separate lists for tables, figures, and any other label you’ve used).  A List of Appendices is handled differently - see the Appendices section of this Guide for more information.

Including Figures and Supplemental Figures in the List of Figures

There are two ways to combine Figures AND Supplemental Figures in your List of Figures -- the easy way, and the complicated way. It comes down to how you want the list to be laid out. This goes for Tables and Supplemental Tables, too, of course.

The Easy Way

Use the Insert Caption tool to apply a Figure caption (just like you've been doing with your regular Figures) to each of your Supplemental Figures. Once you've got the caption in place, then just type the word "Supplemental" before "Figure X".  When you update it, the List of Figures will pull in "Supplemental Figure X" into the List.  The drawback is that the numbering for those Supplemental Figures will follow the numbering for your regular Figures, so you'll have:

Figure 1.1 Figure 1.2 Supplemental Figure 1.3 Figure 1.4

If you'd prefer the first Supplemental Figure to be numbered independently of the Figure numbering ("Supplemental Figure 1.1"), then things get a bit more complicated. We cover how to integrate figures and supplemental figures into one List of Figures in the section below.

How do I integrate figures and supplemental figures in the same List of Figures?

A recent email inquiry:

Several of my chapters have supplemental figures at the end that I would like to include in the List of Figures at the beginning of my thesis. Do you know how to include all captions labeled either "Supplemental Figure" or "Figure" in the same List of Figures, using Word styles? I know how to create a label for each type of figure, but not how to integrate those two different labels into one List, based on order of appearance in my dissertation. Right now, I have to create two Lists: Figures go in the first, and Supplemental Figures go in the second. I want to set it up so that Figure 1 is followed by Supplemental Figure 1, which is followed by Figure 2, all in the same List. Any help would be greatly appreciated!

Our response:

The problem you're running into is that a "List of..." can only have captions representing one caption  label . We can have separate labels for "Figures" and "Supplemental Figures", but as you've found, you then have to have each of those two lists in your List of Figures, placed one after the other:

Figure 1.1 . . . . . . . . . . . . . . . . . . . 23 Figure 1.2 . . . . . . . . . . . . . . . . . . . 24 Figure 2.1 . . . . . . . . . . . . . . . . . . . 46 Figure 2.2 . . . . . . . . . . . . . . . . . . . 48 Supplemental Figure 1.1  . . . . . . . . . . . . 28 Supplemental Figure 1.2  . . . . . . . . . . . . 29 Supplemental Figure 2.1  . . . . . . . . . . . . 51 Supplemental Figure 2.2  . . . . . . . . . . . . 52

To the reader, it wouldn't necessarily be apparent they are two lists, but looking at the page numbers you'll notice that they aren't in page order, as Rackham requires.

If you don't mind the Supplemental Figure numbers NOT starting over at 1, like this:

Figure 1.1 . . . . . . . . . . . . . . . . . . . 23 Figure 1.2 . . . . . . . . . . . . . . . . . . . 24 Supplemental Figure 1.3  . . . . . . . . . . . . 28 Supplemental Figure 1.4  . . . . . . . . . . . . 29 Figure 2.1 . . . . . . . . . . . . . . . . . . . 46 Figure 2.2 . . . . . . . . . . . . . . . . . . . 48 Supplemental Figure 2.3  . . . . . . . . . . . . 51 Supplemental Figure 2.4  . . . . . . . . . . . . 52

then you can continue to use the Figure caption label for all of them, then manually type the word "Supplemental" before the word "Figure" in the caption itself. Update your List of Figures, and it will pull in the extra word you added, as above.

The real, but imperfect, solution:

But if you really want to have those supplemental figures interspersed among the other figures in your List of Figures and using their own numbering scheme, there's a way. The solution is tricky, it's a bit of a hack, and may be more trouble than it's worth...but you'll be the best judge of that.  The trick is to go ahead and create the two caption labels, and then we'll create one List that pulls in ALL captions -- which means this List will initially be cluttered with all your Table, Figure, Supplemental Figure, etc... captions -- a messy thing, but we did mention this solution was imperfect, but it gets the job done. Then – most importantly – we'll delete the lines that include captions for things we don't want in that particular List.

Start off by deleting any existing List of Figures you already have. Then:

1. Place your cursor where you want your integrated list of figures to be.

2. In the References tab, click Insert Table of Figures

3. In the window that appears, click Options...

5. Click OK to close the Table of Figures window.

That will create one list that includes ALL of your captions -- tables, figures, equations, supplemental figures -- everything. You now need to delete the things that shouldn't be there. A helpful tip is to hover your cursor in the empty 1" margin just to the left of the lines you want to delete (your cursor will change to a rightward-facing arrow) and click once to select a line. Click and drag down in the margin to select multiple lines. This can make it much easier to select things to delete.

This is something you should wait to do until just before you save it as a PDF or send it to a reviewer, because anytime you update that all-in-one List of Figures field, it'll pull EVERYTHING back in again ...and you'll have to delete the unwanted items again.

Obviously, this is a hack and could be a big job if there are a lot of captions to find and delete. There may be a more elegant way to do it, but we haven't found anything better yet, unfortunately. Perhaps you could create a brand new caption style, apply it to all your Figure and Supplemental Figure captions, and use this same trick to "Build table of figures from:" that new style -- but we haven't dug into that yet. Still pretty "hacky", but perhaps worth exploring if you're feeling adventurous.

We don't claim to know everything, so if you come across a simpler solution please let us know with an email to [email protected] .

• Change margins Article
• Create newsletter columns Article
• Change page orientation to landscape or portrait Article
• Add a border to a page Article
• Insert a header or footer Article
• Insert page numbers Article
• Insert a page break Article
• Insert a table of contents Article

Insert a table of contents

A table of contents in Word is based on the headings in your document.

Create the table of contents

Put your cursor where you want to add the table of contents.

Go to References > Table of Contents . and choose an automatic style.

If you make changes to your document that affect the table of contents, update the table of contents by right-clicking the table of contents and choosing Update Field .

To update your table of contents manually, see Update a table of contents .

If you have missing entries

Missing entries often happen because headings aren't formatted as headings.

For each heading that you want in the table of contents, select the heading text.

Go to Home > Styles , and then choose Heading 1 .

Update your table of contents.

Word uses the headings in your document to build an automatic table of contents that can be updated when you change the heading text, sequence, or level.

Click where you want to insert the table of contents – usually near the beginning of a document.

Click References > Table of Contents and then choose an Automatic Table of Contents style from the list.

Note:  If you use a Manual Table of Contents style, Word won't use your headings to create a table of contents and won't be able to update it automatically. Instead, Word will use placeholder text to create the look of a table of contents so you can manually type each entry into the table of contents. To update your manual table of contents, see Update a table of contents .

If you want to Format or customize your table of contents , you can. For example, you can change the font, the number of heading levels, and whether to show dotted lines between entries and page numbers.

Click where you want to insert the table of contents—usually near the beginning of the document.

On the toolbar ribbon, select References . 

Near the left end, select Insert Table of Contents . (Or select Table of Contents > Insert Table of Contents . 

The table of contents is inserted, showing the headings and page numbering in your document.

If you make changes to your document that affect the table of contents, you can update it by right-clicking the table and selecting  Update Table of Contents .

Get the learning guide

For a hands-on guide that steps you through the process of creating a table of contents, download our Table of Contents tutorial . Or, in desktop Word, go to File > New , and search for table of contents .

Update a table of contents  

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Microsoft 365 subscription benefits

Microsoft 365 training

Microsoft security

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Ask the Microsoft Community

Microsoft Tech Community

Windows Insiders

Microsoft 365 Insiders

Was this information helpful?

Thank you for your feedback.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples

Table of contents

Use our free Readability checker

A dissertation table of contents is a list of the chapters and sections included in a dissertation or thesis, along with their page numbers. It helps to navigate the document easily and locate specific information. Each chapter or section should be listed with its corresponding page number. The table of contents should be formatted according to the guidelines of the specific style guide being used, such as APA or MLA.

We would guess that students usually start working on the table of contents at the last minute. It is quite apparent and makes sense, as this is the list of chapters and sections with page locations. Do you think it's easy? 

From our experience, it can be quite tricky to organize everything according to APA, Chicago, or any other academic writing style. In this blog, we will discuss how to write a table of contents for a research paper , thesis or dissertation in Microsoft Word. We will create it together to guide students through the process. 

Also, here you will find examples of table of contents created by thesis writers at StudyCrumb . Let’s go!

What Is a Table of Contents: Definition

It is obvious that the table of contents (TOC) is an essential manuscript part you can’t skip. If you are dealing with a dissertation, thesis or research paper, you need to know how to build it in accordance with academic guidance. This is a detailed roadmap for your work and outlined structure you can follow for a research presentation. 

In case you are working on an essay or report, you may not include the table of contents, as it is a short academic text. But for the research paper, thesis or dissertation, table of contents is essential and required. It is possible to say the same about any Master’s project. It should be located between the dissertation abstract and introduction chapter. In most cases, it is about 2-3 pages long. 

Our expert dissertation writing service prepared a great template that can be used for your work. Make your research formatting easy with ready solutions!

Types of Table of Contents

How to choose which table of contents will fit your research paper, thesis, dissertation, or report best? Make a decision based on your work length. Some academic writing styles, such as APA paper format or MLA style , have specific formatting for this list. 

However, we will outline the most commonly used typology:

• Single-level table of contents. At this type, we use only chapters. For instance, you will have an Introduction, Literature Review, methodology, and other chapters with page numbers. It can be used for shorter research work. For long writing forms like manuscripts, it can be too broad, and you will need to go into details.
• Subdivided table of contents. The most frequently used form to organize the contents table. It will include not only chapters but also sections — a level 2 subheading for each part. It will help to be more specific about what to expect in each part of your research work.
• Table of contents with multiple levels. This is a more divided structure, including subheadings with a level 3 for each section. Quite often, those subheadings can be rewritten or deleted during the last editing. It is essential to keep them in the right order.

Before you decide which type will work best for you, let us share with you some examples of each formatting style.

Example of Table of Contents With a Single Level

Introduction: The Misinformation Roots ………..…… 3 Literature Review .....................................….....………… 10 Research Methodology and Design ……................. 24 Results.............................................................................. 28 Discussion ....................................................................... 32

Sometimes, you will need to put an extra emphasis on subsections. Check this layout to see how your subheadings can be organized.

Example of Table of Contents Page with Subdivided Levels

Introduction: Information War ............……………….. 3       Background…………………………………….………..…… 4       Current State ……………………………………...…...…… 5       Defining Research Questions………………………. 9 Literature Review………………………...……………..……... 11       The Roots of Information Warfare ………....… 11        Information Wars …………………………….………..… 14        Cyber Wars Research ........................................ 17

If you are working on a lengthy, complex paper, this outline will suit your project most. It will help readers navigate through your document by breaking it down into smaller, more manageable sections.

Multi-Level Table of Contents Page Example

Introduction……………………………………………….......……….… 3       Emergence of Climate Change ………..……....….….. 3       Key Activist Groups in Climate Change .............. 5              Greenpeace International ………..…………......... 9              European Climate Foundation …….……………. 10              WWF ……………………………………….……….............. 11        Significant Movements ……………….………....……… 13 Literature Review ……………………………………......…………. 15

What Sections Should Be Included in a Table of Contents?

To start with, the scientific table of contents should include all chapters and its subheading. It is important to choose the formatting that will give your readers a full overview of your work from the very beginning. However, there are other chapters that you may miss constructing the 2-pager table. So, let's look at all you need to include:

• Dissertation introduction
• Literature review
• Research methodology
• Results section
• Dissertation discussion
• Conclusion of a thesis
• Reference list. Mention a number of a page where you start listing your sources.
• Appendices. For instance, if you have a data set, table or figure, include it in your research appendix .

This is how the ideal structured dissertation or research paper table of contents will look like. Remember that it still should take 2 pages. You need to choose the best formatting style to manage its length.

Tables, Figures, and Appendices in TOC

While creating a table of contents in a research paper, thesis or dissertation, you will need to include appendices in each case you have them. However, the formatting and adding tables and figures can vary based on the number and citation style. If you have more than 3 tables or figures, you may decide to have all of them at the end of your project. So, add them to the table of contents. 

Figures, graphics, and diagrams in research papers, dissertations and theses should be numbered. If you use them from another source, ensure that you make a proper citation based on the chosen style guide.

Appendix in Table of Contents Example

Appendix A. Row Data Set…………………………………… 41 Appendix B. IBR Data………………………………………….… 43 Appendix C. SPSS Data………………………………………… 44

What Shouldn't Be Included in a Table of Contents?

When creating a dissertation table of contents, students want to include everything they have in a document. However, some components should not be on this page. Here is what we are talking about:

• Thesis acknowledgement
• Paper abstract
• The content list itself

Acknowledgement and abstract should be located before the content list, so there is no need to add them. You need to present a clear structure that will help your readers to navigate through the work and quickly find any requested information.

How to Create a Table of Contents for a Research Paper or Dissertation In Word?

It may look like working with this list can take a long. But we have one proposal for our users. Instead of writing a table of contents manually, create it automatically in Microsoft Word. You do not need any specific tech knowledge to do this. Let’s go through this process step-by-step and explain how to make a table of contents for a research paper or dissertation in a few clicks.

• Open Home tab and choose the style for your table of contents (ToC next).
• Apply heading 1 to your chapters, heading 2 to the subheading, and if needed heading 3 to the level 3 heading.
• Next, you are going to create a research paper or PhD dissertation table of contents. Open References and choose ToC.
• Choose the citation style for your work. For example, let’s choose APL for now. Meeting all style requirements (bold font, title formatting, numbers) is essential.
• Define the number of levels for your dissertation or thesis table of contents. In case you want to have 3 levels, choose Automatic Table 2.
• You are done! Click ok, and here is your page with listed chapters!

You see how easy it can be! Every time you make changes to your text or headings, it will be automatic.

Updating Your Table of Contents in MS Word

Table of contents of a research paper or dissertation is created, and you continue to edit your work until submission. It is common practice, and with MS Word, you can automate all the updates. 

Let’s outline this process in our step-by-step guide!

• Right-click on your ToC in a document.
• Update field section is next.
• Choose “update ToC."
• Here, you can update your entire ToC — choose an option that works the best for you!

As you may see, working with automated solutions is much easier when you write a dissertation which has manifold subsections. That is why it is better to learn how to work on MS Word with the content list meaning be able to manage it effectively.

Table of Contents Examples

From our experience, students used to think that the content list was quite a complicated part of the work. Even with automated solutions, you must be clear about what to include and how to organize formatting. To solve the problem and answer all your questions, use our research paper or dissertation contents page example. Our paper writers designed a sample table of contents to illustrate the best practices and various styles in formatting the work. 

Check our samples to find advanced options for organizing your own list.

Example of Table of Contents in Research Paper

As you can see, this contents page includes sections with different levels.

Thesis/Dissertation Table of Contents Example

Have a question about your specific case? Check samples first, as we are sure you can get almost all the answers in our guides and sample sets. 

>> Read more: APA Format Table of Contents

Tips on Creating a Table of Contents

To finalize all that we shared on creating the table of contents page, let’s go through our tips list. We outline the best advice to help you with a dissertation table of contents.

• Use automated solutions for creating a list of chapters for your report, research papers, or dissertations — it will save you time in the future.
• Be clear with the formatting style you use for the research.
• Choose the best level type of list based on the paper length.
• Update a list after making changes to the text.
• Check the page list before submitting the work.

Bottom Line on Making Table of Contents for Dissertations/ Papers

To summarize, working with a research paper, thesis or dissertation table of contents can be challenging. This article outlines how to create a table of contents in Word and how to update it appropriately. You can learn what to include in the content list, how long it can be, and where to locate it. Write your work using more than one table of contents sample we prepared for students. It is often easy to check how the same list was made for other dissertations before finalizing yours. We encourage you to learn how to create a list with pages automatically and update it. It will definitely make your academic life easier.

Not sure if your work 's quality level is enough for getting a top-notch result? We’ve got you covered! Our team of skilled academic writers is always ready to help once you ask “ write my dissertation for me !" Just select your writer, send them your requirements and get a custom study tailored to your instructions.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

• Colleges & Degrees
• Academic Calendar
• International Education
• Graduate Studies
• Accreditation
• Tuition and Fees
• Parking & Maps
• Careers with CSULB
• Alumni Home
• Alumni Volunteering
• Alumni Giving

Campus Life

• Centers & Organizations
• Commencement
• Student Life
• Office of the President
• Office of the Provost
• Administration & Finance
• Student Affairs
• University Relations & Development
• Information Technology
• Beach Shops
• Campus Directory
• Enrollment Services
• Financial Aid
• Schedule of Classes
• Student Records
• 49er Foundation
• Research Foundation
• University Policies

1250 BELLFLOWER BOULEVARD LONG BEACH, CALIFORNIA 90840 562.985.4111

Setting up a Table of Contents

You can force the "automated" (inserted) Microsoft Word Table of Contents into our University format requirements; however, it can take considerably more time than using tabs if you do not already know how to modify an inserted table of contents.

Below you will find the basic instructions on setting up the tabs required for creating a table of contents. All of these instructions are based on Microsoft Word for PCs not Macs. Students using Macs should be able to get the general idea and then utilize the Microsoft Word Help feature to find the commands needed for this version.

If your document is a new document, without text or formatting of any kind, proceed straight to “To find the Tabs Dialog Box” instructions.

If you already have text and formatting:

• Remove  all formatting (this includes any tabs you have manually entered and any line indentation).
• Bring all lines back  to the 1 inch left margin
• Delete  any periods (or dots) you may have used to create "dot leaders" from the words of a listing to the page number
• The last word of each title and its page number should be joined as one. Example:  LIST OF TABLESv Example:  3. METHODOLOGY34
• Select all text  and leave selected through steps 6 and 7 and throughout the tab setting process.
• Clear the format settings : In the HOME tab, under the Font Group, the top right icon is the Clear Format command button (looks like the letter A partially covered by a red eraser).
• Set to single-line spacing : In the HOME tab or the PAGE LAYOUT tab, click on the small box to the right of the word "Paragraph" to bring up a dialog box. In the "Spacing" section near the middle of the Paragraph Dialog Box, set line spacing to "Single" and line spacing boxes (marked "Before and "After") to "0 pt"

To find the Tabs Dialog Box:

Bring up the Paragraph Dialog Box as described in step 7. Then click on the Tabs command button in the bottom left-hand corner. This will bring up the Tabs Dialog Box.

Once in the Tabs Dialog Box:

All of the following instructions are based on the following margins:

• Left = 1.0 inch
• Right = 1.0 inch
• Bottom = 1.0 inch
• Top = 1.0 inch 
• Footer (from bottom edge) = 0.8 inch
• Click  on the  Clear All  command button. This will clear all tabs that may still be in your table of contents.
• Basic Instructions:   Place  your cursor in the  Tab stop  position field and enter the first tab stop position.  Next, click on the needed  Alignment  and the needed  Leader .   Click  the  Set  command button (you must complete this step for each tab you want to create).  Then enter the next tab stop position ( repeat process for each new tab ). 
• It is advisable to click on the Show/Hide command button which has this symbol, ¶ . This will reveal where you have hit tabs, enters, and spaces. Tabs will appear as a single right-facing arrow. Paragraph returns or enters will appear as the ¶ symbol. Spaces will appear as a tiny solid dot in the middle of the line.

The Show/Hide command button typically appears under the HOME tab.

Setting the Tabs:

• Tab (1):  Chapter titles or appendix titles (indent for entire line, including the chapter number or appendix letter)
• Tab stop position = 0.25”
• Alignment = Left
• Leader = NONE

Click the Set command button.

• Tab (2): Extra indentation for chapter titles or appendix titles that are longer than one line
• Tab stop position = 0.75”
• Tab (3):  Dot leaders  
• Tab stop position = 6.32”
• Alignment = Right
• Leader = 2.....
• Tab (4):  Page number
• Tab stop position = 6.45”

To finish and go back to your document click OK.

Using the Tabs:

If you have not yet typed your titles or pages numbers:

For the chapter title or appendix title, hit the Tab key once. This will indent the line 0.25 inch. Type your chapter number and the title.

If chapter title or appendix title is longer than one line, hit Enter key where needed to force words to the next line (do not extend words into column of page numbers) and then hit Tab key twice. This will indent the line 0.75 inch.

Once you have indented your lines appropriately, you are ready to add the dot leaders (row of dots leading from words of title to page number). With our cursor placed after the last word of the title (chapter or section title), hit the Tab key once. This will produce the dot leaders. Then hit the Tab key once more to move your cursor over to the page number position. 

Now type your page number. Because this tab was right aligned, when you type you will notice that as you type the numbers are moving left instead of moving right (i.e., you are typing right to left).  This means that your page numbers will always align correctly.

If you have already typed your titles and page numbers:

For the chapter title or appendix title, place your cursor in front of the chapter number or appendix letter, then hit the Tab key once. This will indent the line 0.25 inch.

If chapter title or appendix title is longer than one line, hit Enter key where needed to force words to the next line (do not extend words into column of page numbers) and then hit Tab key twice. This will indent the line 0.75 inch.

Once you have indented your lines appropriately, you are ready to add the dot leaders (dots leading from words of title to page number). If you have already typed your page numbers and they are adjoined to the last word of your titles as instructed (refer to the instructions under “If you already have text and formatting”), then place your cursor between the last word of your title and the page number and hit the Tab key once. This will produce the dot leaders.

Now hit the Tab key once more. This will move your page number over. The page number will be right aligned; this means that your page numbers will always align correctly.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• Figure and Table Lists | Word Instructions, Template & Examples

Figure and Table Lists | Word Instructions, Template & Examples

Published on October 13, 2015 by Sarah Vinz . Revised on July 18, 2023 by Tegan George.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation , along with their corresponding page numbers. These lists give your reader an overview of how you have used figures and tables in your document.

While these lists are often not required, you may want to include one as a way to stay organized if your dissertation topic leads you to use several figures and tables over the course of your paper. Your educational institution may require one, so be sure to check their guidelines. Ultimately, if you do choose to add one, it should go directly after your table of contents .

You can download our Microsoft Word template below to help you get started.

Download Word doc

• Table of contents

How to create a list of figures and tables in Word

Example of a list of tables and figures, additional lists to consider, other interesting articles, frequently asked questions about the list of tables and figures.

The first step to creating your list of figures and tables is to ensure that each of your figures and tables has a caption . This way, Microsoft Word will be able to find each one and compile them in your list automatically.

To do this, follow these steps:

• Navigate to the References tab, and click “Insert Caption,” which you can find in the Captions group.
• Give your caption a name. In the Label list, you can select the label that best describes your figure or table, or make your own by selecting “New Label.”

Next, you can insert the list of tables and figures directly by clicking “Insert Table of Figures,” which can be found to the right of the “Insert Caption” button. Be careful here—the list will only include items that you have marked using the “Insert Caption” tool!

You can choose the formatting and layout within this menu as well, as you can see below.

There are a few things to remember as you go:

• Figures and tables always need to be numbered, with clear titles.

In addition to your list of tables and figures, there are a few other lists to consider for your thesis or dissertation. They can be placed in the following order:

• List of abbreviations

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

Your list of tables and figures should go directly after your table of contents in your thesis or dissertation.

Lists of figures and tables are often not required, and aren’t particularly common. They specifically aren’t required for APA-Style, though you should be careful to follow their other guidelines for figures and tables .

If you have many figures and tables in your thesis or dissertation, include one may help you stay organized. Your educational institution may require them, so be sure to check their guidelines.

Copyright information can usually be found wherever the table or figure was published. For example, for a diagram in a journal article , look on the journal’s website or the database where you found the article. Images found on sites like Flickr are listed with clear copyright information.

If you find that permission is required to reproduce the material, be sure to contact the author or publisher and ask for it.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation and displays them with the page number where they can be found.

APA doesn’t require you to include a list of tables or a list of figures . However, it is advisable to do so if your text is long enough to feature a table of contents and it includes a lot of tables and/or figures .

A list of tables and list of figures appear (in that order) after your table of contents, and are presented in a similar way.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Vinz, S. (2023, July 18). Figure and Table Lists | Word Instructions, Template & Examples. Scribbr. Retrieved August 21, 2024, from https://www.scribbr.com/dissertation/figure-and-table-lists-in-your-dissertation/

Is this article helpful?

Sarah's academic background includes a Master of Arts in English, a Master of International Affairs degree, and a Bachelor of Arts in Political Science. She loves the challenge of finding the perfect formulation or wording and derives much satisfaction from helping students take their academic writing up a notch.

"I thought AI Proofreading was useless but.."

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”