characteristics of a true experimental design

• Foundations
• Write Paper

Search form

• Experiments
• Anthropology
• Self-Esteem
• Social Anxiety

True Experimental Design

True experimental design is regarded as the most accurate form of experimental research, in that it tries to prove or disprove a hypothesis mathematically, with statistical analysis.

This article is a part of the guide:

• Research Designs
• Quantitative and Qualitative Research
• Literature Review
• Quantitative Research Design

Browse Full Outline

• 1 Research Designs
• 2.1 Pilot Study
• 2.2 Quantitative Research Design
• 2.3 Qualitative Research Design
• 2.4 Quantitative and Qualitative Research
• 3.1 Case Study
• 3.2 Naturalistic Observation
• 3.3 Survey Research Design
• 3.4 Observational Study
• 4.1 Case-Control Study
• 4.2 Cohort Study
• 4.3 Longitudinal Study
• 4.4 Cross Sectional Study
• 4.5 Correlational Study
• 5.1 Field Experiments
• 5.2 Quasi-Experimental Design
• 5.3 Identical Twins Study
• 6.1 Experimental Design
• 6.2 True Experimental Design
• 6.3 Double Blind Experiment
• 6.4 Factorial Design
• 7.1 Literature Review
• 7.2 Systematic Reviews
• 7.3 Meta Analysis

For some of the physical sciences, such as physics, chemistry and geology, they are standard and commonly used. For social sciences, psychology and biology, they can be a little more difficult to set up.

For an experiment to be classed as a true experimental design, it must fit all of the following criteria.

• The sample groups must be assigned randomly .
• There must be a viable control group .
• Only one variable can be manipulated and tested. It is possible to test more than one, but such experiments and their statistical analysis tend to be cumbersome and difficult.
• The tested subjects must be randomly assigned to either control or experimental groups.

The results of a true experimental design can be statistically analyzed and so there can be little argument about the results .

It is also much easier for other researchers to replicate the experiment and validate the results.

For physical sciences working with mainly numerical data, it is much easier to manipulate one variable, so true experimental design usually gives a yes or no answer.

Disadvantages

Whilst perfect in principle, there are a number of problems with this type of design. Firstly, they can be almost too perfect, with the conditions being under complete control and not being representative of real world conditions.

For psychologists and behavioral biologists, for example, there can never be any guarantee that a human or living organism will exhibit ‘normal’ behavior under experimental conditions.

True experiments can be too accurate and it is very difficult to obtain a complete rejection or acceptance of a hypothesis because the standards of proof required are so difficult to reach.

True experiments are also difficult and expensive to set up. They can also be very impractical.

While for some fields, like physics, there are not as many variables so the design is easy, for social sciences and biological sciences, where variations are not so clearly defined it is much more difficult to exclude other factors that may be affecting the manipulated variable.

True experimental design is an integral part of science, usually acting as a final test of a hypothesis . Whilst they can be cumbersome and expensive to set up, literature reviews , qualitative research and descriptive research can serve as a good precursor to generate a testable hypothesis, saving time and money.

Whilst they can be a little artificial and restrictive, they are the only type of research that is accepted by all disciplines as statistically provable.

• Psychology 101
• Flags and Countries
• Capitals and Countries

Martyn Shuttleworth (Mar 24, 2008). True Experimental Design. Retrieved Jun 21, 2024 from Explorable.com: https://explorable.com/true-experimental-design

You Are Allowed To Copy The Text

The text in this article is licensed under the Creative Commons-License Attribution 4.0 International (CC BY 4.0) .

This means you're free to copy, share and adapt any parts (or all) of the text in the article, as long as you give appropriate credit and provide a link/reference to this page.

That is it. You don't need our permission to copy the article; just include a link/reference back to this page. You can use it freely (with some kind of link), and we're also okay with people reprinting in publications like books, blogs, newsletters, course-material, papers, wikipedia and presentations (with clear attribution).

Related articles

Quasi-Experimental Design

Design of Experiments

Experimental Research

Control Group

Hypothesis Testing

Want to stay up to date? Follow us!

Get all these articles in 1 guide.

Want the full version to study at home, take to school or just scribble on?

Whether you are an academic novice, or you simply want to brush up your skills, this book will take your academic writing skills to the next level.

Download electronic versions: - Epub for mobiles and tablets - PDF version here

Save this course for later

Don't have time for it all now? No problem, save it as a course and come back to it later.

Footer bottom

• Privacy Policy

• Subscribe to our RSS Feed
• Like us on Facebook
• Follow us on Twitter

• Voxco Online
• Voxco Panel Management
• Voxco Panel Portal
• Voxco Audience
• Voxco Mobile Offline
• Voxco Dialer Cloud
• Voxco Dialer On-premise
• Voxco TCPA Connect
• Voxco Analytics
• Voxco Text & Sentiment Analysis

• 40+ question types
• Drag-and-drop interface
• Skip logic and branching
• Multi-lingual survey
• Text piping
• Question library
• CSS customization
• White-label surveys
• Customizable ‘Thank You’ page
• Customizable survey theme
• Reminder send-outs
• Survey rewards
• Social media
• Website surveys
• Correlation analysis
• Cross-tabulation analysis
• Trend analysis
• Real-time dashboard
• Customizable report
• Email address validation
• Recaptcha validation
• SSL security

Take a peek at our powerful survey features to design surveys that scale discoveries.

Download feature sheet.

• Hospitality
• Financial Services
• Academic Research
• Customer Experience
• Employee Experience
• Product Experience
• Market Research
• Social Research
• Data Analysis

Explore Voxco 

Need to map Voxco’s features & offerings? We can help!

Watch a Demo 

Download Brochures 

Get a Quote

• NPS Calculator
• CES Calculator
• A/B Testing Calculator
• Margin of Error Calculator
• Sample Size Calculator
• CX Strategy & Management Hub
• Market Research Hub
• Patient Experience Hub
• Employee Experience Hub
• Market Research Guide
• Customer Experience Guide
• The Voxco Guide to Customer Experience
• NPS Knowledge Hub
• Survey Research Guides
• Survey Template Library
• Webinars and Events
• Feature Sheets
• Try a sample survey
• Professional services

Find the best customer experience platform

Uncover customer pain points, analyze feedback and run successful CX programs with the best CX platform for your team.

Get the Guide Now

We’ve been avid users of the Voxco platform now for over 20 years. It gives us the flexibility to routinely enhance our survey toolkit and provides our clients with a more robust dataset and story to tell their clients.

VP Innovation & Strategic Partnerships, The Logit Group

• Client Stories
• Voxco Reviews
• Why Voxco Research?
• Careers at Voxco
• Vulnerabilities and Ethical Hacking

Explore Regional Offices

• Survey Software The world’s leading omnichannel survey software
• Online Survey Tools Create sophisticated surveys with ease.
• Mobile Offline Conduct efficient field surveys.
• Text Analysis
• Close The Loop
• Automated Translations
• NPS Dashboard
• CATI Manage high volume phone surveys efficiently
• Cloud/On-premise Dialer TCPA compliant Cloud on-premise dialer
• IVR Survey Software Boost productivity with automated call workflows.
• Analytics Analyze survey data with visual dashboards
• Panel Manager Nurture a loyal community of respondents.
• Survey Portal Best-in-class user friendly survey portal.
• Voxco Audience Conduct targeted sample research in hours.
• Predictive Analytics
• Customer 360
• Customer Loyalty
• Fraud & Risk Management
• AI/ML Enablement Services
• Credit Underwriting

Find the best survey software for you! (Along with a checklist to compare platforms)

Get Buyer’s Guide

• 100+ question types
• SMS surveys
• Banking & Financial Services
• Retail Solution
• Risk Management
• Customer Lifecycle Solutions
• Net Promoter Score
• Customer Behaviour Analytics
• Customer Segmentation
• Data Unification

Explore Voxco 

Watch a Demo 

Download Brochures 

• CX Strategy & Management Hub
• Blogs & White papers
• Case Studies

VP Innovation & Strategic Partnerships, The Logit Group

• Why Voxco Intelligence?
• Our clients
• Client stories
• Featuresheets

True Experimental Design - Types & How to Conduct

SHARE THE ARTICLE ON

True-experimental research is often considered the most accurate research. A researcher has complete control over the process which helps reduce any error in the result. This also increases the confidence level of the research outcome. 

In this blog, we will explore in detail what it is, its various types, and how to conduct it in 7 steps.

What is a true experimental design?

True experimental design is a statistical approach to establishing a cause-and-effect relationship between variables. This research method is the most accurate forms which provides substantial backing to support the existence of relationships.

There are three elements in this study that you need to fulfill in order to perform this type of research:

1. The existence of a control group:  The sample of participants is subdivided into 2 groups – one that is subjected to the experiment and so, undergoes changes and the other that does not. 

2. The presence of an independent variable:  Independent variables that influence the working of other variables must be there for the researcher to control and observe changes.

3.   Random assignment:  Participants must be randomly distributed within the groups.

Read how Voxco helped Brain Research improve research productivity by 60%.

“The platform extends our ability to productively manage our busy intercept survey projects, and the confidence to support major new clients.”

Laura Ruvalcaba, President & CEO, Brain Research

An example of true experimental design

A study to observe the effects of physical exercise on productivity levels can be conducted using a true experimental design.

Suppose a group of 300 people volunteer for a study involving office workers in their 20s. These 300 participants are randomly distributed into 3 groups. 

• 1st Group:  A control group that does not participate in exercising and has to carry on with their everyday schedule. 
• 2nd Group:  Asked to indulge in home workouts for 30-45 minutes every day for one month. 
• 3rd Group:  Has to work out 2 hours every day for a month. Both groups have to take one rest day per week.

In this research, the  level of physical exercise acts  as an  independent variable  while the  performance at the workplace  is a  dependent variable  that varies with the change in exercise levels.

Before initiating the true experimental research, each participant’s current performance at the workplace is evaluated and documented. As the study goes on, a progress report is generated for each of the 300 participants to monitor how their physical activity has impacted their workplace functioning.

At the end of two weeks, participants from the 2nd and 3rd groups that are able to endure their current level of workout, are asked to increase their daily exercise time by half an hour. While those that aren’t able to endure, are suggested to either continue with the same timing or fix the timing to a level that is half an hour lower. 

So, in this true experimental design a participant who at the end of two weeks is not able to put up with 2 hours of workout, will now workout for 1 hour and 30 minutes for the remaining tenure of two weeks while someone who can endure the 2 hours, will now push themselves towards 2 hours and 30 minutes.

In this manner, the researcher notes the timings of each member from the two active groups for the first two weeks and the remaining two weeks after the change in timings and also monitors their corresponding performance levels at work.

The above example can be categorized as true experiment research since now we have:

• Control group:  Group 1 carries on with their schedule without being conditioned to exercise.
• Independent variable : The duration of exercise each day.
• Random assignment:  300 participants are randomly distributed into 3 groups and as such, there are no criteria for the assignment.

What is the purpose of conducting true experimental research?

Both the primary usage and purpose of a true experimental design lie in establishing meaningful relationships based on quantitative surveillance. 

True experiments focus on connecting the dots between two or more variables by displaying how the change in one variable brings about a change in another variable. It can be as small a change as having enough sleep improves retention or as large scale as geographical differences affect consumer behavior. 

The main idea is to ensure the presence of different sets of variables to study with some shared commonality.

Beyond this, the research is used when the three criteria of random distribution, a control group, and an independent variable to be manipulated by the researcher, are met.

Voxco’s omnichannel survey software helps you collect insights from multiple channels using a single platform

See the true power of using an integrated survey platform to conduct online, offline, and phone surveys along with a built-in analytical suite.

What are the advantages of true experimental design?

Let’s take a look at some advantages that make this research design conclusive and accurate research.

Concrete method of research:

The statistical nature of the experimental design makes it highly credible and accurate. The data collected from the research is subjected to statistical tools. 

This makes the results easy to understand, objective and actionable. This makes it a better alternative to observation-based studies that are subjective and difficult to make inferences from.

Easy to understand and replicate:

Since the research provides hard figures and a precise representation of the entire process, the results presented become easily comprehensible for any stakeholder. 

Further, it becomes easier for future researchers conducting studies around the same subject to get a grasp of prior takes on the same and replicate its results to supplement their own research.

Establishes comparison:

The presence of a control group in true experimental research allows researchers to compare and contrast. The degree to which a methodology is applied to a group can be studied with respect to the end result as a frame of reference.

Conclusive:

The research combines observational and statistical analysis to generate informed conclusions. This directs the flow of follow-up actions in a definite direction, thus, making the research process fruitful.

What are the disadvantages of true experimental design?

We should also learn about the disadvantages it can pose in research to help you determine when and how you should use this type of research. 

This research design is costly. It takes a lot of investment in recruiting and managing a large number of participants which is necessary for the sample to be representative. 

The high resource investment makes it highly important for the researcher to plan each aspect of the process to its minute details.

Too idealistic:

The research takes place in a completely controlled environment. Such a scenario is not representative of real-world situations and so the results may not be authentic. 

T his is one of the main limitation why open-field research is preferred over lab research, wherein the researcher can influence the study.

Time-consuming:

Setting up and conducting a true experiment is highly time-consuming. This is because of the processes like recruiting a large enough sample, gathering respondent data, random distribution into groups, monitoring the process over a span of time, tracking changes, and making adjustments. 

The amount of processes, although essential to the entire model, is not a feasible option to go for when the results are required in the near future.

Now that we’ve learned about the advantages and disadvantages let’s look at its types.

Get started with your Experimental Research

Send your survey to the right people to receive quality responses.

What are the 3 types of true experimental design?

The research design is categorized into three types based on the way you should conduct the research. Each type has its own procedure and guidelines, which you should be aware of to achieve reliable data.  

The three types are: 

1) Post-test-only control group design. 

2) Pre-test post-test control group design.

3) Solomon four group control design.

Let’s see how these three types differ. 

1) Post-test-only control group design:

In this type of true experimental research, the control as well as the experimental group that has been formed using random allocation, are not tested before applying the experimental methodology. This is so as to avoid affecting the quality of the study.

The participants are always on the lookout to identify the purpose and criteria for assessment. Pre-test conveys to them the basis on which they are being judged which can allow them to modify their end responses, compromising the quality of the entire research process. 

However, this can hinder your ability to establish a comparison between the pre-experiment and post-experiment conditions which weighs in on the changes that have taken place over the course of the research.

2) Pre-test post-test control group design:

It is a modification of the post-test control group design with an additional test carried out before the implementation of the experimental methodology. 

This two-way testing method can help in noticing significant changes brought in the research groups as a result of the experimental intervention. There is no guarantee that the results present the true picture as post-testing can be affected due to the exposure of the respondents to the pre-test.

3) Solomon four group control design:

This type of true experimental design involves the random distribution of sample members into 4 groups. These groups consist of 2 control groups that are not subjected to the experiments and changes and 2 experimental groups that the experimental methodology applies to.

Out of these 4 groups, one control and one experimental group is used for pre-testing while all four groups are subjected to post-tests.

This way researcher gets to establish pre-test post-test contrast while there remains another set of respondents that have not been exposed to pre-tests and so, provide genuine post-test responses, thus, accounting for testing effects.

Explore all the survey question types possible on Voxco.

What is the difference between pre-experimental & true experimental research design.

Pre-experimental research helps determine the researchers’ intervention on a group of people. It is a step where you design the proper experiment to address a research question. 

True experiment defines that you are conducting the research. It helps establish a cause-and-effect relationship between the variables. 

We’ll discuss the differences between the two based on four categories, which are: 

• Observatory Vs. Statistical. 
• Absence Vs. Presence of control groups. 
• Non-randomization Vs. Randomization. 
• Feasibility test Vs. Conclusive test.

Let’s find the differences to better understand the two experiments. 

Observatory vs Statistical:

Pre-experimental research  is an observation-based model i.e. it is highly subjective and qualitative in nature. 

The true experimental design  offers an accurate analysis of the data collected using statistical data analysis tools.

Absence vs Presence of control groups:

Pre-experimental research  designs do not usually employ a control group which makes it difficult to establish contrast. 

While all three types of  true experiments  employ control groups.

Non-randomization vs Randomization:

Pre-experimental research  doesn’t use randomization in certain cases whereas 

True experimental research  always adheres to a randomization approach to group distribution.

Feasibility test vs Conclusive test:

Pre-tests  are used as a feasibility mechanism to see if the methodology being applied is actually suitable for the research purpose and whether it will have an impact or not.

While  true experiments  are conclusive in nature.

Guide to Descriptive Research

Learn the key steps of conducting descriptive research to uncover breakthrough insights into your target market.

7 Steps to conduct a true experimental research

It’s important to understand the steps/guidelines of research in order to maintain research integrity and gather valid and reliable data.  

We have explained 7 steps to conducting this research in detail. The TL;DR version of it is: 

1) Identify the research objective.

2) Identify independent and dependent variables.

3) Define and group the population.

4) Conduct Pre-tests.

5) Conduct the research.

6) Conduct post-tests.

7) Analyse the collected data. 

Now let’s explore these seven steps in true experimental design. 

1) Identify the research objective:

Identify the variables which you need to analyze for a cause-and-effect relationship. Deliberate which particular relationship study will help you make effective decisions and frame this research objective in one of the following manners:

• Determination of the impact of X on Y
• Studying how the usage/application of X causes Y

2) Identify independent and dependent variables:

Establish clarity as to what would be your controlling/independent variable and what variable would change and would be observed by the researcher. In the above samples, for research purposes, X is an independent variable & Y is a dependent variable.

3) Define and group the population:

Define the targeted audience for the true experimental design. It is out of this target audience that a sample needs to be selected for accurate research to be carried out. It is imperative that the target population gets defined in as much detail as possible.

To narrow the field of view, a random selection of individuals from the population is carried out. These are the selected respondents that help the researcher in answering their research questions. Post their selection, this sample of individuals gets randomly subdivided into control and experimental groups.

4) Conduct Pre-tests:

Before commencing with the actual study, pre-tests are to be carried out wherever necessary. These pre-tests take an assessment of the condition of the respondent so that an effective comparison between the pre and post-tests reveals the change brought about by the research.

5) Conduct the research:

Implement your experimental procedure with the experimental group created in the previous step in the true experimental design. Provide the necessary instructions and solve any doubts or queries that the participants might have. Monitor their practices and track their progress. Ensure that the intervention is being properly complied with, otherwise, the results can be tainted.

6) Conduct post-tests:

Gauge the impact that the intervention has had on the experimental group and compare it with the pre-tests. This is particularly important since the pre-test serves as a starting point from where all the changes that have been measured in the post-test, are the effect of the experimental intervention. 

So for example: If the pre-test in the above example shows that a particular customer service employee was able to solve 10 customer problems in two hours and the post-test conducted after a month of 2-hour workouts every day shows a boost of 5 additional customer problems being solved within those 2 hours, the additional 5 customer service calls that the employee makes is the result of the additional productivity gained by the employee as a result of putting in the requisite time

7) Analyse the collected data:

Use appropriate statistical tools to derive inferences from the data observed and collected. Correlational data analysis tools and tests of significance are highly effective relationship-based studies and so are highly applicable for true experimental research.

This step also includes differentiating between the pre and the post-tests for scoping in on the impact that the independent variable has had on the dependent variable. A contrast between the control group and the experimental groups sheds light on the change brought about within the span of the experiment and how much change is brought intentionally and is not caused by chance.

Voxco is trusted by 500+ global brands and top 50 MR firms to gather insights and take actions.

See how Voxco can help enhance your research efficiency.

Wrapping up;

This sums up everything about true experimental design. While it’s often considered complex and expensive, it is also one of the most accurate research.

The true experiment uses statistical analysis which ensures that your data is reliable and has a high confidence level. Curious to learn how you can use  survey software  to conduct your experimental research,  book a meeting with us .

• What is true experimental research design?

True experimental research design helps investigate the cause-and-effect relationships between the variables under study. The research method requires manipulating an independent variable, random assignment of participants to different groups, and measuring the dependent variable. 

• How does true experiment research differ from other research designs?

The true experiment uses random selection/assignment of participants in the group to minimize preexisting differences between groups. It allows researchers to make causal inferences about the influence of independent variables. This is the factor that makes it different from other research designs like correlational research. 

• What are the key components of true experimental research designs?

The following are the important factors of a true experimental design: 

• Manipulation of the independent variable. 
• Control groups. 
• Experiment groups. 
• Dependent variable. 
• Random assignment. 
• What are some advantages of true experiment design?

It enables you to establish causal relationships between variables and offers control over the confounding variables. Moreover, you can generalize the research findings to the target population. 

• What ethical considerations are important in a true experimental research design?

When conducting this research method, you must obtain informed consent from the participants. It’s important to ensure the confidentiality and privacy of the participants to minimize any risk or harm. 

Explore Voxco Survey Software

+ Omnichannel Survey Software 

+ Online Survey Software 

+ CATI Survey Software 

+ IVR Survey Software 

+ Market Research Tool

+ Customer Experience Tool 

+ Product Experience Software 

+ Enterprise Survey Software 

Mapping Customer Journey

Mapping Customer Journey SHARE THE ARTICLE ON Table of Contents What is a Customer Journey Map? A customer journey map can be described as a

Linear regression

Linear regression SHARE THE ARTICLE ON Share on facebook Share on twitter Share on linkedin Table of Contents What is Linear regression? Linear regression is

Transactional NPS

Transactional NPS® (tNPS®) SHARE THE ARTICLE ON Net Promoter Score®  Hub Table of Contents What is Net Promoter Score®(NPS®)? Net Promoter Score®, or NPS®, is

Why SMART Survey Designs Are the Future of Customer Feedback

Why SMART Surveys Are the Future of Customer Feedback SHARE THE ARTICLE ON Table of Contents Creating a survey requires time and work if you

What is CSAT Score? Definition, Formula, and More

What is CSAT Score? – In-Depth Exploring SHARE THE ARTICLE ON Table of Contents CSAT- an acronym for Customer Satisfaction, is a commonly-used key performance

Probability Sampling

SURVEY METHODOLOGIES A Comprehensive Guide to Probability Sampling: Types and Examples Market Research Tool kit Get started with Voxco’s Market Research Toolkit. Market Research trends guide

We use cookies in our website to give you the best browsing experience and to tailor advertising. By continuing to use our website, you give us consent to the use of cookies. Read More

• Skip to secondary menu
• Skip to main content
• Skip to primary sidebar

Statistics By Jim

Making statistics intuitive

Experimental Design: Definition and Types

By Jim Frost 3 Comments

What is Experimental Design?

An experimental design is a detailed plan for collecting and using data to identify causal relationships. Through careful planning, the design of experiments allows your data collection efforts to have a reasonable chance of detecting effects and testing hypotheses that answer your research questions.

An experiment is a data collection procedure that occurs in controlled conditions to identify and understand causal relationships between variables. Researchers can use many potential designs. The ultimate choice depends on their research question, resources, goals, and constraints. In some fields of study, researchers refer to experimental design as the design of experiments (DOE). Both terms are synonymous.

Ultimately, the design of experiments helps ensure that your procedures and data will evaluate your research question effectively. Without an experimental design, you might waste your efforts in a process that, for many potential reasons, can’t answer your research question. In short, it helps you trust your results.

Learn more about Independent and Dependent Variables .

Design of Experiments: Goals & Settings

Experiments occur in many settings, ranging from psychology, social sciences, medicine, physics, engineering, and industrial and service sectors. Typically, experimental goals are to discover a previously unknown effect , confirm a known effect, or test a hypothesis.

Effects represent causal relationships between variables. For example, in a medical experiment, does the new medicine cause an improvement in health outcomes? If so, the medicine has a causal effect on the outcome.

An experimental design’s focus depends on the subject area and can include the following goals:

• Understanding the relationships between variables.
• Identifying the variables that have the largest impact on the outcomes.
• Finding the input variable settings that produce an optimal result.

For example, psychologists have conducted experiments to understand how conformity affects decision-making. Sociologists have performed experiments to determine whether ethnicity affects the public reaction to staged bike thefts. These experiments map out the causal relationships between variables, and their primary goal is to understand the role of various factors.

Conversely, in a manufacturing environment, the researchers might use an experimental design to find the factors that most effectively improve their product’s strength, identify the optimal manufacturing settings, and do all that while accounting for various constraints. In short, a manufacturer’s goal is often to use experiments to improve their products cost-effectively.

In a medical experiment, the goal might be to quantify the medicine’s effect and find the optimum dosage.

Developing an Experimental Design

Developing an experimental design involves planning that maximizes the potential to collect data that is both trustworthy and able to detect causal relationships. Specifically, these studies aim to see effects when they exist in the population the researchers are studying, preferentially favor causal effects, isolate each factor’s true effect from potential confounders, and produce conclusions that you can generalize to the real world.

To accomplish these goals, experimental designs carefully manage data validity and reliability , and internal and external experimental validity. When your experiment is valid and reliable, you can expect your procedures and data to produce trustworthy results.

An excellent experimental design involves the following:

• Lots of preplanning.
• Developing experimental treatments.
• Determining how to assign subjects to treatment groups.

The remainder of this article focuses on how experimental designs incorporate these essential items to accomplish their research goals.

Learn more about Data Reliability vs. Validity and Internal and External Experimental Validity .

Preplanning, Defining, and Operationalizing for Design of Experiments

This phase of the design of experiments helps you identify critical variables, know how to measure them while ensuring reliability and validity, and understand the relationships between them. The review can also help you find ways to reduce sources of variability, which increases your ability to detect treatment effects. Notably, the literature review allows you to learn how similar studies designed their experiments and the challenges they faced.

Operationalizing a study involves taking your research question, using the background information you gathered, and formulating an actionable plan.

This process should produce a specific and testable hypothesis using data that you can reasonably collect given the resources available to the experiment.

• Null hypothesis : The jumping exercise intervention does not affect bone density.
• Alternative hypothesis : The jumping exercise intervention affects bone density.

To learn more about this early phase, read Five Steps for Conducting Scientific Studies with Statistical Analyses .

Formulating Treatments in Experimental Designs

In an experimental design, treatments are variables that the researchers control. They are the primary independent variables of interest. Researchers administer the treatment to the subjects or items in the experiment and want to know whether it causes changes in the outcome.

As the name implies, a treatment can be medical in nature, such as a new medicine or vaccine. But it’s a general term that applies to other things such as training programs, manufacturing settings, teaching methods, and types of fertilizers. I helped run an experiment where the treatment was a jumping exercise intervention that we hoped would increase bone density. All these treatment examples are things that potentially influence a measurable outcome.

Even when you know your treatment generally, you must carefully consider the amount. How large of a dose? If you’re comparing three different temperatures in a manufacturing process, how far apart are they? For my bone mineral density study, we had to determine how frequently the exercise sessions would occur and how long each lasted.

How you define the treatments in the design of experiments can affect your findings and the generalizability of your results.

Assigning Subjects to Experimental Groups

A crucial decision for all experimental designs is determining how researchers assign subjects to the experimental conditions—the treatment and control groups. The control group is often, but not always, the lack of a treatment. It serves as a basis for comparison by showing outcomes for subjects who don’t receive a treatment. Learn more about Control Groups .

How your experimental design assigns subjects to the groups affects how confident you can be that the findings represent true causal effects rather than mere correlation caused by confounders. Indeed, the assignment method influences how you control for confounding variables. This is the difference between correlation and causation .

Imagine a study finds that vitamin consumption correlates with better health outcomes. As a researcher, you want to be able to say that vitamin consumption causes the improvements. However, with the wrong experimental design, you might only be able to say there is an association. A confounder, and not the vitamins, might actually cause the health benefits.

Let’s explore some of the ways to assign subjects in design of experiments.

Completely Randomized Designs

A completely randomized experimental design randomly assigns all subjects to the treatment and control groups. You simply take each participant and use a random process to determine their group assignment. You can flip coins, roll a die, or use a computer. Randomized experiments must be prospective studies because they need to be able to control group assignment.

Random assignment in the design of experiments helps ensure that the groups are roughly equivalent at the beginning of the study. This equivalence at the start increases your confidence that any differences you see at the end were caused by the treatments. The randomization tends to equalize confounders between the experimental groups and, thereby, cancels out their effects, leaving only the treatment effects.

For example, in a vitamin study, the researchers can randomly assign participants to either the control or vitamin group. Because the groups are approximately equal when the experiment starts, if the health outcomes are different at the end of the study, the researchers can be confident that the vitamins caused those improvements.

Statisticians consider randomized experimental designs to be the best for identifying causal relationships.

If you can’t randomly assign subjects but want to draw causal conclusions about an intervention, consider using a quasi-experimental design .

Learn more about Randomized Controlled Trials and Random Assignment in Experiments .

Randomized Block Designs

Nuisance factors are variables that can affect the outcome, but they are not the researcher’s primary interest. Unfortunately, they can hide or distort the treatment results. When experimenters know about specific nuisance factors, they can use a randomized block design to minimize their impact.

This experimental design takes subjects with a shared “nuisance” characteristic and groups them into blocks. The participants in each block are then randomly assigned to the experimental groups. This process allows the experiment to control for known nuisance factors.

Blocking in the design of experiments reduces the impact of nuisance factors on experimental error. The analysis assesses the effects of the treatment within each block, which removes the variability between blocks. The result is that blocked experimental designs can reduce the impact of nuisance variables, increasing the ability to detect treatment effects accurately.

Suppose you’re testing various teaching methods. Because grade level likely affects educational outcomes, you might use grade level as a blocking factor. To use a randomized block design for this scenario, divide the participants by grade level and then randomly assign the members of each grade level to the experimental groups.

A standard guideline for an experimental design is to “Block what you can, randomize what you cannot.” Use blocking for a few primary nuisance factors. Then use random assignment to distribute the unblocked nuisance factors equally between the experimental conditions.

You can also use covariates to control nuisance factors. Learn about Covariates: Definition and Uses .

Observational Studies

In some experimental designs, randomly assigning subjects to the experimental conditions is impossible or unethical. The researchers simply can’t assign participants to the experimental groups. However, they can observe them in their natural groupings, measure the essential variables, and look for correlations. These observational studies are also known as quasi-experimental designs. Retrospective studies must be observational in nature because they look back at past events.

Imagine you’re studying the effects of depression on an activity. Clearly, you can’t randomly assign participants to the depression and control groups. But you can observe participants with and without depression and see how their task performance differs.

Observational studies let you perform research when you can’t control the treatment. However, quasi-experimental designs increase the problem of confounding variables. For this design of experiments, correlation does not necessarily imply causation. While special procedures can help control confounders in an observational study, you’re ultimately less confident that the results represent causal findings.

Learn more about Observational Studies .

For a good comparison, learn about the differences and tradeoffs between Observational Studies and Randomized Experiments .

Between-Subjects vs. Within-Subjects Experimental Designs

When you think of the design of experiments, you probably picture a treatment and control group. Researchers assign participants to only one of these groups, so each group contains entirely different subjects than the other groups. Analysts compare the groups at the end of the experiment. Statisticians refer to this method as a between-subjects, or independent measures, experimental design.

In a between-subjects design , you can have more than one treatment group, but each subject is exposed to only one condition, the control group or one of the treatment groups.

A potential downside to this approach is that differences between groups at the beginning can affect the results at the end. As you’ve read earlier, random assignment can reduce those differences, but it is imperfect. There will always be some variability between the groups.

In a  within-subjects experimental design , also known as repeated measures, subjects experience all treatment conditions and are measured for each. Each subject acts as their own control, which reduces variability and increases the statistical power to detect effects.

In this experimental design, you minimize pre-existing differences between the experimental conditions because they all contain the same subjects. However, the order of treatments can affect the results. Beware of practice and fatigue effects. Learn more about Repeated Measures Designs .

Design of Experiments Examples

For example, a bone density study has three experimental groups—a control group, a stretching exercise group, and a jumping exercise group.

In a between-subjects experimental design, scientists randomly assign each participant to one of the three groups.

In a within-subjects design, all subjects experience the three conditions sequentially while the researchers measure bone density repeatedly. The procedure can switch the order of treatments for the participants to help reduce order effects.

Matched Pairs Experimental Design

A matched pairs experimental design is a between-subjects study that uses pairs of similar subjects. Researchers use this approach to reduce pre-existing differences between experimental groups. It’s yet another design of experiments method for reducing sources of variability.

Researchers identify variables likely to affect the outcome, such as demographics. When they pick a subject with a set of characteristics, they try to locate another participant with similar attributes to create a matched pair. Scientists randomly assign one member of a pair to the treatment group and the other to the control group.

On the plus side, this process creates two similar groups, and it doesn’t create treatment order effects. While matched pairs do not produce the perfectly matched groups of a within-subjects design (which uses the same subjects in all conditions), it aims to reduce variability between groups relative to a between-subjects study.

On the downside, finding matched pairs is very time-consuming. Additionally, if one member of a matched pair drops out, the other subject must leave the study too.

Learn more about Matched Pairs Design: Uses & Examples .

Another consideration is whether you’ll use a cross-sectional design (one point in time) or use a longitudinal study to track changes over time .

A case study is a research method that often serves as a precursor to a more rigorous experimental design by identifying research questions, variables, and hypotheses to test. Learn more about What is a Case Study? Definition & Examples .

In conclusion, the design of experiments is extremely sensitive to subject area concerns and the time and resources available to the researchers. Developing a suitable experimental design requires balancing a multitude of considerations. A successful design is necessary to obtain trustworthy answers to your research question and to have a reasonable chance of detecting treatment effects when they exist.

Share this:

Reader Interactions

March 23, 2024 at 2:35 pm

Dear Jim You wrote a superb document, I will use it in my Buistatistics course, along with your three books. Thank you very much! Miguel

March 23, 2024 at 5:43 pm

Thanks so much, Miguel! Glad this post was helpful and I trust the books will be as well.

April 10, 2023 at 4:36 am

What are the purpose and uses of experimental research design?

Comments and Questions Cancel reply

• Privacy Policy

Home » Experimental Design – Types, Methods, Guide

Experimental Design – Types, Methods, Guide

Table of Contents

Experimental Design

Experimental design is a process of planning and conducting scientific experiments to investigate a hypothesis or research question. It involves carefully designing an experiment that can test the hypothesis, and controlling for other variables that may influence the results.

Experimental design typically includes identifying the variables that will be manipulated or measured, defining the sample or population to be studied, selecting an appropriate method of sampling, choosing a method for data collection and analysis, and determining the appropriate statistical tests to use.

Types of Experimental Design

Here are the different types of experimental design:

Completely Randomized Design

In this design, participants are randomly assigned to one of two or more groups, and each group is exposed to a different treatment or condition.

Randomized Block Design

This design involves dividing participants into blocks based on a specific characteristic, such as age or gender, and then randomly assigning participants within each block to one of two or more treatment groups.

Factorial Design

In a factorial design, participants are randomly assigned to one of several groups, each of which receives a different combination of two or more independent variables.

Repeated Measures Design

In this design, each participant is exposed to all of the different treatments or conditions, either in a random order or in a predetermined order.

Crossover Design

This design involves randomly assigning participants to one of two or more treatment groups, with each group receiving one treatment during the first phase of the study and then switching to a different treatment during the second phase.

Split-plot Design

In this design, the researcher manipulates one or more variables at different levels and uses a randomized block design to control for other variables.

Nested Design

This design involves grouping participants within larger units, such as schools or households, and then randomly assigning these units to different treatment groups.

Laboratory Experiment

Laboratory experiments are conducted under controlled conditions, which allows for greater precision and accuracy. However, because laboratory conditions are not always representative of real-world conditions, the results of these experiments may not be generalizable to the population at large.

Field Experiment

Field experiments are conducted in naturalistic settings and allow for more realistic observations. However, because field experiments are not as controlled as laboratory experiments, they may be subject to more sources of error.

Experimental Design Methods

Experimental design methods refer to the techniques and procedures used to design and conduct experiments in scientific research. Here are some common experimental design methods:

Randomization

This involves randomly assigning participants to different groups or treatments to ensure that any observed differences between groups are due to the treatment and not to other factors.

Control Group

The use of a control group is an important experimental design method that involves having a group of participants that do not receive the treatment or intervention being studied. The control group is used as a baseline to compare the effects of the treatment group.

Blinding involves keeping participants, researchers, or both unaware of which treatment group participants are in, in order to reduce the risk of bias in the results.

Counterbalancing

This involves systematically varying the order in which participants receive treatments or interventions in order to control for order effects.

Replication

Replication involves conducting the same experiment with different samples or under different conditions to increase the reliability and validity of the results.

This experimental design method involves manipulating multiple independent variables simultaneously to investigate their combined effects on the dependent variable.

This involves dividing participants into subgroups or blocks based on specific characteristics, such as age or gender, in order to reduce the risk of confounding variables.

Data Collection Method

Experimental design data collection methods are techniques and procedures used to collect data in experimental research. Here are some common experimental design data collection methods:

Direct Observation

This method involves observing and recording the behavior or phenomenon of interest in real time. It may involve the use of structured or unstructured observation, and may be conducted in a laboratory or naturalistic setting.

Self-report Measures

Self-report measures involve asking participants to report their thoughts, feelings, or behaviors using questionnaires, surveys, or interviews. These measures may be administered in person or online.

Behavioral Measures

Behavioral measures involve measuring participants’ behavior directly, such as through reaction time tasks or performance tests. These measures may be administered using specialized equipment or software.

Physiological Measures

Physiological measures involve measuring participants’ physiological responses, such as heart rate, blood pressure, or brain activity, using specialized equipment. These measures may be invasive or non-invasive, and may be administered in a laboratory or clinical setting.

Archival Data

Archival data involves using existing records or data, such as medical records, administrative records, or historical documents, as a source of information. These data may be collected from public or private sources.

Computerized Measures

Computerized measures involve using software or computer programs to collect data on participants’ behavior or responses. These measures may include reaction time tasks, cognitive tests, or other types of computer-based assessments.

Video Recording

Video recording involves recording participants’ behavior or interactions using cameras or other recording equipment. This method can be used to capture detailed information about participants’ behavior or to analyze social interactions.

Data Analysis Method

Experimental design data analysis methods refer to the statistical techniques and procedures used to analyze data collected in experimental research. Here are some common experimental design data analysis methods:

Descriptive Statistics

Descriptive statistics are used to summarize and describe the data collected in the study. This includes measures such as mean, median, mode, range, and standard deviation.

Inferential Statistics

Inferential statistics are used to make inferences or generalizations about a larger population based on the data collected in the study. This includes hypothesis testing and estimation.

Analysis of Variance (ANOVA)

ANOVA is a statistical technique used to compare means across two or more groups in order to determine whether there are significant differences between the groups. There are several types of ANOVA, including one-way ANOVA, two-way ANOVA, and repeated measures ANOVA.

Regression Analysis

Regression analysis is used to model the relationship between two or more variables in order to determine the strength and direction of the relationship. There are several types of regression analysis, including linear regression, logistic regression, and multiple regression.

Factor Analysis

Factor analysis is used to identify underlying factors or dimensions in a set of variables. This can be used to reduce the complexity of the data and identify patterns in the data.

Structural Equation Modeling (SEM)

SEM is a statistical technique used to model complex relationships between variables. It can be used to test complex theories and models of causality.

Cluster Analysis

Cluster analysis is used to group similar cases or observations together based on similarities or differences in their characteristics.

Time Series Analysis

Time series analysis is used to analyze data collected over time in order to identify trends, patterns, or changes in the data.

Multilevel Modeling

Multilevel modeling is used to analyze data that is nested within multiple levels, such as students nested within schools or employees nested within companies.

Applications of Experimental Design 

Experimental design is a versatile research methodology that can be applied in many fields. Here are some applications of experimental design:

• Medical Research: Experimental design is commonly used to test new treatments or medications for various medical conditions. This includes clinical trials to evaluate the safety and effectiveness of new drugs or medical devices.
• Agriculture : Experimental design is used to test new crop varieties, fertilizers, and other agricultural practices. This includes randomized field trials to evaluate the effects of different treatments on crop yield, quality, and pest resistance.
• Environmental science: Experimental design is used to study the effects of environmental factors, such as pollution or climate change, on ecosystems and wildlife. This includes controlled experiments to study the effects of pollutants on plant growth or animal behavior.
• Psychology : Experimental design is used to study human behavior and cognitive processes. This includes experiments to test the effects of different interventions, such as therapy or medication, on mental health outcomes.
• Engineering : Experimental design is used to test new materials, designs, and manufacturing processes in engineering applications. This includes laboratory experiments to test the strength and durability of new materials, or field experiments to test the performance of new technologies.
• Education : Experimental design is used to evaluate the effectiveness of teaching methods, educational interventions, and programs. This includes randomized controlled trials to compare different teaching methods or evaluate the impact of educational programs on student outcomes.
• Marketing : Experimental design is used to test the effectiveness of marketing campaigns, pricing strategies, and product designs. This includes experiments to test the impact of different marketing messages or pricing schemes on consumer behavior.

Examples of Experimental Design 

Here are some examples of experimental design in different fields:

• Example in Medical research : A study that investigates the effectiveness of a new drug treatment for a particular condition. Patients are randomly assigned to either a treatment group or a control group, with the treatment group receiving the new drug and the control group receiving a placebo. The outcomes, such as improvement in symptoms or side effects, are measured and compared between the two groups.
• Example in Education research: A study that examines the impact of a new teaching method on student learning outcomes. Students are randomly assigned to either a group that receives the new teaching method or a group that receives the traditional teaching method. Student achievement is measured before and after the intervention, and the results are compared between the two groups.
• Example in Environmental science: A study that tests the effectiveness of a new method for reducing pollution in a river. Two sections of the river are selected, with one section treated with the new method and the other section left untreated. The water quality is measured before and after the intervention, and the results are compared between the two sections.
• Example in Marketing research: A study that investigates the impact of a new advertising campaign on consumer behavior. Participants are randomly assigned to either a group that is exposed to the new campaign or a group that is not. Their behavior, such as purchasing or product awareness, is measured and compared between the two groups.
• Example in Social psychology: A study that examines the effect of a new social intervention on reducing prejudice towards a marginalized group. Participants are randomly assigned to either a group that receives the intervention or a control group that does not. Their attitudes and behavior towards the marginalized group are measured before and after the intervention, and the results are compared between the two groups.

When to use Experimental Research Design 

Experimental research design should be used when a researcher wants to establish a cause-and-effect relationship between variables. It is particularly useful when studying the impact of an intervention or treatment on a particular outcome.

Here are some situations where experimental research design may be appropriate:

• When studying the effects of a new drug or medical treatment: Experimental research design is commonly used in medical research to test the effectiveness and safety of new drugs or medical treatments. By randomly assigning patients to treatment and control groups, researchers can determine whether the treatment is effective in improving health outcomes.
• When evaluating the effectiveness of an educational intervention: An experimental research design can be used to evaluate the impact of a new teaching method or educational program on student learning outcomes. By randomly assigning students to treatment and control groups, researchers can determine whether the intervention is effective in improving academic performance.
• When testing the effectiveness of a marketing campaign: An experimental research design can be used to test the effectiveness of different marketing messages or strategies. By randomly assigning participants to treatment and control groups, researchers can determine whether the marketing campaign is effective in changing consumer behavior.
• When studying the effects of an environmental intervention: Experimental research design can be used to study the impact of environmental interventions, such as pollution reduction programs or conservation efforts. By randomly assigning locations or areas to treatment and control groups, researchers can determine whether the intervention is effective in improving environmental outcomes.
• When testing the effects of a new technology: An experimental research design can be used to test the effectiveness and safety of new technologies or engineering designs. By randomly assigning participants or locations to treatment and control groups, researchers can determine whether the new technology is effective in achieving its intended purpose.

How to Conduct Experimental Research

Here are the steps to conduct Experimental Research:

• Identify a Research Question : Start by identifying a research question that you want to answer through the experiment. The question should be clear, specific, and testable.
• Develop a Hypothesis: Based on your research question, develop a hypothesis that predicts the relationship between the independent and dependent variables. The hypothesis should be clear and testable.
• Design the Experiment : Determine the type of experimental design you will use, such as a between-subjects design or a within-subjects design. Also, decide on the experimental conditions, such as the number of independent variables, the levels of the independent variable, and the dependent variable to be measured.
• Select Participants: Select the participants who will take part in the experiment. They should be representative of the population you are interested in studying.
• Randomly Assign Participants to Groups: If you are using a between-subjects design, randomly assign participants to groups to control for individual differences.
• Conduct the Experiment : Conduct the experiment by manipulating the independent variable(s) and measuring the dependent variable(s) across the different conditions.
• Analyze the Data: Analyze the data using appropriate statistical methods to determine if there is a significant effect of the independent variable(s) on the dependent variable(s).
• Draw Conclusions: Based on the data analysis, draw conclusions about the relationship between the independent and dependent variables. If the results support the hypothesis, then it is accepted. If the results do not support the hypothesis, then it is rejected.
• Communicate the Results: Finally, communicate the results of the experiment through a research report or presentation. Include the purpose of the study, the methods used, the results obtained, and the conclusions drawn.

Purpose of Experimental Design 

The purpose of experimental design is to control and manipulate one or more independent variables to determine their effect on a dependent variable. Experimental design allows researchers to systematically investigate causal relationships between variables, and to establish cause-and-effect relationships between the independent and dependent variables. Through experimental design, researchers can test hypotheses and make inferences about the population from which the sample was drawn.

Experimental design provides a structured approach to designing and conducting experiments, ensuring that the results are reliable and valid. By carefully controlling for extraneous variables that may affect the outcome of the study, experimental design allows researchers to isolate the effect of the independent variable(s) on the dependent variable(s), and to minimize the influence of other factors that may confound the results.

Experimental design also allows researchers to generalize their findings to the larger population from which the sample was drawn. By randomly selecting participants and using statistical techniques to analyze the data, researchers can make inferences about the larger population with a high degree of confidence.

Overall, the purpose of experimental design is to provide a rigorous, systematic, and scientific method for testing hypotheses and establishing cause-and-effect relationships between variables. Experimental design is a powerful tool for advancing scientific knowledge and informing evidence-based practice in various fields, including psychology, biology, medicine, engineering, and social sciences.

Advantages of Experimental Design 

Experimental design offers several advantages in research. Here are some of the main advantages:

• Control over extraneous variables: Experimental design allows researchers to control for extraneous variables that may affect the outcome of the study. By manipulating the independent variable and holding all other variables constant, researchers can isolate the effect of the independent variable on the dependent variable.
• Establishing causality: Experimental design allows researchers to establish causality by manipulating the independent variable and observing its effect on the dependent variable. This allows researchers to determine whether changes in the independent variable cause changes in the dependent variable.
• Replication : Experimental design allows researchers to replicate their experiments to ensure that the findings are consistent and reliable. Replication is important for establishing the validity and generalizability of the findings.
• Random assignment: Experimental design often involves randomly assigning participants to conditions. This helps to ensure that individual differences between participants are evenly distributed across conditions, which increases the internal validity of the study.
• Precision : Experimental design allows researchers to measure variables with precision, which can increase the accuracy and reliability of the data.
• Generalizability : If the study is well-designed, experimental design can increase the generalizability of the findings. By controlling for extraneous variables and using random assignment, researchers can increase the likelihood that the findings will apply to other populations and contexts.

Limitations of Experimental Design

Experimental design has some limitations that researchers should be aware of. Here are some of the main limitations:

• Artificiality : Experimental design often involves creating artificial situations that may not reflect real-world situations. This can limit the external validity of the findings, or the extent to which the findings can be generalized to real-world settings.
• Ethical concerns: Some experimental designs may raise ethical concerns, particularly if they involve manipulating variables that could cause harm to participants or if they involve deception.
• Participant bias : Participants in experimental studies may modify their behavior in response to the experiment, which can lead to participant bias.
• Limited generalizability: The conditions of the experiment may not reflect the complexities of real-world situations. As a result, the findings may not be applicable to all populations and contexts.
• Cost and time : Experimental design can be expensive and time-consuming, particularly if the experiment requires specialized equipment or if the sample size is large.
• Researcher bias : Researchers may unintentionally bias the results of the experiment if they have expectations or preferences for certain outcomes.
• Lack of feasibility : Experimental design may not be feasible in some cases, particularly if the research question involves variables that cannot be manipulated or controlled.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Basic Research – Types, Methods and Examples

Exploratory Research – Types, Methods and...

Qualitative Research – Methods, Analysis Types...

Quantitative Research – Methods, Types and...

Focus Groups – Steps, Examples and Guide

Observational Research – Methods and Guide

In order to continue enjoying our site, we ask that you confirm your identity as a human. Thank you very much for your cooperation.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• A Quick Guide to Experimental Design | 5 Steps & Examples

A Quick Guide to Experimental Design | 5 Steps & Examples

Published on 11 April 2022 by Rebecca Bevans . Revised on 5 December 2022.

Experiments are used to study causal relationships . You manipulate one or more independent variables and measure their effect on one or more dependent variables.

Experimental design means creating a set of procedures to systematically test a hypothesis . A good experimental design requires a strong understanding of the system you are studying. 

There are five key steps in designing an experiment:

• Consider your variables and how they are related
• Write a specific, testable hypothesis
• Design experimental treatments to manipulate your independent variable
• Assign subjects to groups, either between-subjects or within-subjects
• Plan how you will measure your dependent variable

For valid conclusions, you also need to select a representative sample and control any  extraneous variables that might influence your results. If if random assignment of participants to control and treatment groups is impossible, unethical, or highly difficult, consider an observational study instead.

Table of contents

Step 1: define your variables, step 2: write your hypothesis, step 3: design your experimental treatments, step 4: assign your subjects to treatment groups, step 5: measure your dependent variable, frequently asked questions about experimental design.

You should begin with a specific research question . We will work with two research question examples, one from health sciences and one from ecology:

To translate your research question into an experimental hypothesis, you need to define the main variables and make predictions about how they are related.

Start by simply listing the independent and dependent variables .

Then you need to think about possible extraneous and confounding variables and consider how you might control  them in your experiment.

Finally, you can put these variables together into a diagram. Use arrows to show the possible relationships between variables and include signs to show the expected direction of the relationships.

Here we predict that increasing temperature will increase soil respiration and decrease soil moisture, while decreasing soil moisture will lead to decreased soil respiration.

Prevent plagiarism, run a free check.

Now that you have a strong conceptual understanding of the system you are studying, you should be able to write a specific, testable hypothesis that addresses your research question.

The next steps will describe how to design a controlled experiment . In a controlled experiment, you must be able to:

• Systematically and precisely manipulate the independent variable(s).
• Precisely measure the dependent variable(s).
• Control any potential confounding variables.

If your study system doesn’t match these criteria, there are other types of research you can use to answer your research question.

How you manipulate the independent variable can affect the experiment’s external validity – that is, the extent to which the results can be generalised and applied to the broader world.

First, you may need to decide how widely to vary your independent variable.

• just slightly above the natural range for your study region.
• over a wider range of temperatures to mimic future warming.
• over an extreme range that is beyond any possible natural variation.

Second, you may need to choose how finely to vary your independent variable. Sometimes this choice is made for you by your experimental system, but often you will need to decide, and this will affect how much you can infer from your results.

• a categorical variable : either as binary (yes/no) or as levels of a factor (no phone use, low phone use, high phone use).
• a continuous variable (minutes of phone use measured every night).

How you apply your experimental treatments to your test subjects is crucial for obtaining valid and reliable results.

First, you need to consider the study size : how many individuals will be included in the experiment? In general, the more subjects you include, the greater your experiment’s statistical power , which determines how much confidence you can have in your results.

Then you need to randomly assign your subjects to treatment groups . Each group receives a different level of the treatment (e.g. no phone use, low phone use, high phone use).

You should also include a control group , which receives no treatment. The control group tells us what would have happened to your test subjects without any experimental intervention.

When assigning your subjects to groups, there are two main choices you need to make:

• A completely randomised design vs a randomised block design .
• A between-subjects design vs a within-subjects design .

Randomisation

An experiment can be completely randomised or randomised within blocks (aka strata):

• In a completely randomised design , every subject is assigned to a treatment group at random.
• In a randomised block design (aka stratified random design), subjects are first grouped according to a characteristic they share, and then randomly assigned to treatments within those groups.

Sometimes randomisation isn’t practical or ethical , so researchers create partially-random or even non-random designs. An experimental design where treatments aren’t randomly assigned is called a quasi-experimental design .

Between-subjects vs within-subjects

In a between-subjects design (also known as an independent measures design or classic ANOVA design), individuals receive only one of the possible levels of an experimental treatment.

In medical or social research, you might also use matched pairs within your between-subjects design to make sure that each treatment group contains the same variety of test subjects in the same proportions.

In a within-subjects design (also known as a repeated measures design), every individual receives each of the experimental treatments consecutively, and their responses to each treatment are measured.

Within-subjects or repeated measures can also refer to an experimental design where an effect emerges over time, and individual responses are measured over time in order to measure this effect as it emerges.

Counterbalancing (randomising or reversing the order of treatments among subjects) is often used in within-subjects designs to ensure that the order of treatment application doesn’t influence the results of the experiment.

Finally, you need to decide how you’ll collect data on your dependent variable outcomes. You should aim for reliable and valid measurements that minimise bias or error.

Some variables, like temperature, can be objectively measured with scientific instruments. Others may need to be operationalised to turn them into measurable observations.

• Ask participants to record what time they go to sleep and get up each day.
• Ask participants to wear a sleep tracker.

How precisely you measure your dependent variable also affects the kinds of statistical analysis you can use on your data.

Experiments are always context-dependent, and a good experimental design will take into account all of the unique considerations of your study system to produce information that is both valid and relevant to your research question.

Experimental designs are a set of procedures that you plan in order to examine the relationship between variables that interest you.

To design a successful experiment, first identify:

• A testable hypothesis
• One or more independent variables that you will manipulate
• One or more dependent variables that you will measure

When designing the experiment, first decide:

• How your variable(s) will be manipulated
• How you will control for any potential confounding or lurking variables
• How many subjects you will include
• How you will assign treatments to your subjects

The key difference between observational studies and experiments is that, done correctly, an observational study will never influence the responses or behaviours of participants. Experimental designs will have a treatment condition applied to at least a portion of participants.

A confounding variable , also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design , it’s important to identify potential confounding variables and plan how you will reduce their impact.

In a between-subjects design , every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design , each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word ‘between’ means that you’re comparing different conditions between groups, while the word ‘within’ means you’re comparing different conditions within the same group.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bevans, R. (2022, December 05). A Quick Guide to Experimental Design | 5 Steps & Examples. Scribbr. Retrieved 18 June 2024, from https://www.scribbr.co.uk/research-methods/guide-to-experimental-design/

Is this article helpful?

Rebecca Bevans

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons

Margin Size

• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

13.2: True experimental design

• Last updated
• Save as PDF
• Page ID 135156

• Matthew DeCarlo, Cory Cummings, & Kate Agnelli
• Open Social Work Education

\( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

\( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)

\( \newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\)

( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\)

\( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

\( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\)

\( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\)

\( \newcommand{\Span}{\mathrm{span}}\)

\( \newcommand{\id}{\mathrm{id}}\)

\( \newcommand{\kernel}{\mathrm{null}\,}\)

\( \newcommand{\range}{\mathrm{range}\,}\)

\( \newcommand{\RealPart}{\mathrm{Re}}\)

\( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

\( \newcommand{\Argument}{\mathrm{Arg}}\)

\( \newcommand{\norm}[1]{\| #1 \|}\)

\( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\AA}{\unicode[.8,0]{x212B}}\)

\( \newcommand{\vectorA}[1]{\vec{#1}}      % arrow\)

\( \newcommand{\vectorAt}[1]{\vec{\text{#1}}}      % arrow\)

\( \newcommand{\vectorB}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

\( \newcommand{\vectorC}[1]{\textbf{#1}} \)

\( \newcommand{\vectorD}[1]{\overrightarrow{#1}} \)

\( \newcommand{\vectorDt}[1]{\overrightarrow{\text{#1}}} \)

\( \newcommand{\vectE}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash{\mathbf {#1}}}} \)

Learning Objectives

Learners will be able to…

• Describe a true experimental design in social work research
• Understand the different types of true experimental designs
• Determine what kinds of research questions true experimental designs are suited for
• Discuss advantages and disadvantages of true experimental designs

True experimental design , often considered to be the “gold standard” in research designs, is thought of as one of the most rigorous of all research designs. In this design, one or more independent variables are manipulated by the researcher (as treatments), subjects are randomly assigned to different treatment levels (random assignment), and the results of the treatments on outcomes (dependent variables) are observed. The unique strength of experimental research is its  internal validity and its ability to establish ( causality ) through treatment manipulation, while controlling for the effects of extraneous variable. Sometimes the treatment level is no treatment, while other times it is simply a different treatment than that which we are trying to evaluate. For example, we might have a control group that is made up of people who will not receive any treatment for a particular condition. Or, a control group could consist of people who consent to treatment with DBT when we are testing the effectiveness of CBT.

As we discussed in the previous section, a true experiment has a  control group with participants randomly assigned , and an experimental group . This is the most basic element of a true experiment. The next decision a researcher must make is when they need to gather data during their experiment. Do they take a baseline measurement and then a measurement after treatment, or just a measurement after treatment, or do they handle measurement another way? Below, we’ll discuss the three main types of true experimental designs. There are sub-types of each of these designs, but here, we just want to get you started with some of the basics.

Using a true experiment in social work research is often pretty difficult, since as I mentioned earlier, true experiments can be quite resource intensive. True experiments work best with relatively large sample sizes, and random assignment, a key criterion for a true experimental design, is hard (and unethical) to execute in practice when you have people in dire need of an intervention. Nonetheless, some of the strongest evidence bases are built on true experiments.

For the purposes of this section, let’s bring back the example of CBT for the treatment of social anxiety. We have a group of 500 individuals who have agreed to participate in our study, and we have randomly assigned them to the control and experimental groups. The folks in the experimental group will receive CBT, while the folks in the control group will receive more unstructured, basic talk therapy. These designs, as we talked about above, are best suited for explanatory research questions.

Before we get started, take a look at the table below. When explaining experimental research designs, we often use diagrams with abbreviations to visually represent the experiment. Table 13.1 starts us off by laying out what each of the abbreviations mean.

Table 13.1 Experimental research design notations

Pretest and post-test control group design

In  pretest and post-test control group design , participants are given a  pretest of some kind to measure their baseline state before their participation in an intervention. In our social anxiety experiment, we would have participants in both the experimental and control groups complete some measure of social anxiety—most likely an established scale and/or a structured interview—before they start their treatment. As part of the experiment, we would have a defined time period during which the treatment would take place (let’s say 12 weeks, just for illustration). At the end of 12 weeks, we would give both groups the same measure as a  post-test . 

Figure 13.1 Pretest and post-test control group design

In the diagram, RA (random assignment group A) is the experimental group and RB is the control group. O 1  denotes the pre-test, X e  denotes the experimental intervention, and O 2  denotes the post-test. Let’s look at this diagram another way, using the example of CBT for social anxiety that we’ve been talking about.

Figure 13.2 Pretest and post-test control group design testing CBT an intervention

In a situation where the control group received treatment as usual instead of no intervention, the diagram would look this way, with X i  denoting treatment as usual (Figure 13.3).

Figure 13.3 Pretest and post-test control group design with treatment as usual instead of no treatment

Hopefully, these diagrams provide you a visualization of how this type of experiment establishes  time order , a key component of a causal relationship. Did the change occur after the intervention? Assuming there is a change in the scores between the pretest and post-test, we would be able to say that yes, the change did occur after the intervention. Causality can’t exist if the change happened before the intervention—this would mean that something else led to the change, not our intervention.

Post-test only control group design

Post-test only control group design involves only giving participants a post-test, just like it sounds (Figure 13.4).

Figure 13.4 Post-test only control group design

But why would you use this design instead of using a pretest/post-test design? One reason could be the testing effect that can happen when research participants take a pretest. In research, the  testing effect refers to “measurement error related to how a test is given; the conditions of the testing, including environmental conditions; and acclimation to the test itself” (Engel & Schutt, 2017, p. 444)\(^1\) (When we say “measurement error,” all we mean is the accuracy of the way we measure the dependent variable.) Figure 13.4 is a visualization of this type of experiment. The testing effect isn’t always bad in practice—our initial assessments might help clients identify or put into words feelings or experiences they are having when they haven’t been able to do that before. In research, however, we might want to control its effects to isolate a cleaner causal relationship between intervention and outcome.

Going back to our CBT for social anxiety example, we might be concerned that participants would learn about social anxiety symptoms by virtue of taking a pretest. They might then identify that they have those symptoms on the post-test, even though they are not new symptoms for them. That could make our intervention look less effective than it actually is.

However, without a baseline measurement establishing causality can be more difficult. If we don’t know someone’s state of mind before our intervention, how do we know our intervention did anything at all? Establishing  time order is thus a little more difficult. You must balance this consideration with the benefits of this type of design.

Solomon four group design

One way we can possibly measure how much the testing effect might change the results of the experiment is with the Solomon four group design. Basically, as part of this experiment, you have two control groups and two experimental groups. The first pair of groups receives both a pretest and a post-test. The other pair of groups receives only a post-test (Figure 13.5). This design helps address the problem of establishing time order in post-test only control group designs.

Figure 13.5 Solomon four-group design

For our CBT project, we would randomly assign people to four different groups instead of just two. Groups A and B would take our pretest measures and our post-test measures, and groups C and D would take only our post-test measures. We could then compare the results among these groups and see if they’re significantly different between the folks in A and B, and C and D. If they are, we may have identified some kind of testing effect, which enables us to put our results into full context. We don’t want to draw a strong causal conclusion about our intervention when we have major concerns about testing effects without trying to determine the extent of those effects.

Solomon four group designs are less common in social work research, primarily because of the logistics and resource needs involved. Nonetheless, this is an important experimental design to consider when we want to address major concerns about testing effects.

Key Takeaways

• True experimental design is best suited for explanatory research questions.
• True experiments require random assignment of participants to control and experimental groups.
• Pretest/post-test research design involves two points of measurement—one pre-intervention and one post-intervention.
• Post-test only research design involves only one point of measurement—post-intervention. It is a useful design to minimize the effect of testing effects on our results.
• Solomon four group research design involves both of the above types of designs, using 2 pairs of control and experimental groups. One group receives both a pretest and a post-test, while the other receives only a post-test. This can help uncover the influence of testing effects.
• Think about a true experiment you might conduct for your research project. Which design would be best for your research, and why?
• What challenges or limitations might make it unrealistic (or at least very complicated!) for you to carry your true experimental design in the real-world as a student researcher?
• What hypothesis(es) would you test using this true experiment?

Experimental Design

Ethics, Integrity, and the Scientific Method

• Reference work entry
• First Online: 02 April 2020
• Cite this reference work entry

• Jonathan Lewis 2  

2614 Accesses

5 Citations

Experimental design is one aspect of a scientific method. A well-designed, properly conducted experiment aims to control variables in order to isolate and manipulate causal effects and thereby maximize internal validity, support causal inferences, and guarantee reliable results. Traditionally employed in the natural sciences, experimental design has become an important part of research in the social and behavioral sciences. Experimental methods are also endorsed as the most reliable guides to policy effectiveness. Through a discussion of some of the central concepts associated with experimental design, including controlled variation and randomization, this chapter will provide a summary of key ethical issues that tend to arise in experimental contexts. In addition, by exploring assumptions about the nature of causation and by analyzing features of causal relationships, systems, and inferences in social contexts, this chapter will summarize the ways in which experimental design can undermine the integrity of not only social and behavioral research but policies implemented on the basis of such research.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Durable hardcover edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

Research Design: Toward a Realistic Role for Causal Analysis

Experiments and Econometrics

Alderson P (1996) Equipoise as a means of managing uncertainty: personal, communal and proxy. J Med Ethics 223:135–139

Article   Google Scholar  

Arabatzis T (2014) Experiment. In: Curd M, Psillos S (eds) The Routledge companion to philosophy of science, 2nd edn. Routledge, London, pp 191–202

Google Scholar  

Baele S (2013) The ethics of new development economics: is the experimental approach to development economics morally wrong? J Philos Econ 7(1):2–42

Beauchamp T, Childress J (2013) Principles of biomedical ethics, 7th edn. Oxford University Press, Oxford

Binmore K (1999) Why experiment in economics? Econ J 109(453):16–24

Bogen J (2002) Epistemological custard pies from functional brain imaging. Philos Sci 69(3):59–71

Bordens K, Abbott B (2013) Research and design methods: a process approach. McGraw-Hill, Boston

Brady H (2011) Causation and explanation in social science. In: Goodin R (ed) The Oxford handbook of political science. Oxford University Press, Oxford, pp 1054–1107

Broome J (1984) Selecting people randomly. Ethics 95(1):38–55

Brown A, Mehta T, Allison D (2017) Publication bias in science: what is it, why is it problematic, and how can it be addressed? In: Jamieson K, Kahan D, Scheufele D (eds) The Oxford handbook of the science of science communication. Oxford University Press, Oxford, pp 93–101

Cartwright N (1999) The dappled world: a study of the boundaries of science. Cambridge University Press, Cambridge, UK

Book   Google Scholar  

Cartwright N (2007) Hunting causes and using them. Cambridge University Press, Cambridge, UK

Cartwright N (2012) RCTs, evidence, and predicting policy effectiveness. In: Kincaid H (ed) The Oxford handbook of philosophy of social science. Oxford University Press, Oxford, UK, pp 298–318

Cartwright N (2014) Causal inference. In: Cartwright N, Montuschi E (eds) Philosophy of social science: a new introduction. Oxford University Press, Oxford, pp 308–337

Churchill L (1980) Physician-investigator/patient-subject: exploring the logic and the tension. J Med Philos 5(3):215–224

Clarke S (1999) Justifying deception in social science research. J Appl Philos 16(2):151–166

Conner R (1982) Random assignment of clients in social experimentation. In: Sieber J (ed) The ethics of social research: surveys and experiments. Springer, New York, pp 57–77

Chapter   Google Scholar  

Cook T, Campbell D (1986) The causal assumptions of quasi-experimental practice. Synthese 68(1):141–180

Cook C, Sheets C (2011) Clinical equipoise and personal equipoise: two necessary ingredients for reducing bias in manual therapy trials. J Man Manipulative Ther 19(1):55–57

Crasnow S (2017) Bias in social science experiments. In: McIntyre L, Rosenberg A (eds) The Routledge companion to the philosophy of social science. Routledge, London, pp 191–201

Douglas H (2014) Values in social science. In: Cartwright N, Montuschi E (eds) Philosophy of social science: a new introduction. Oxford University Press, Oxford, pp 162–182

Feest U, Steinle F (2016) Experiment. In: Humphreys P (ed) The Oxford handbook of philosophy of science. Oxford University Press, Oxford, pp 274–295

Freedman B (1987) Equipoise and the ethics of clinical research. N Engl J Med 317(3):141–145

Freedman B, Glass K, Weijer C (1996) Placebo orthodoxy in clinical research II: ethical, legal, and regulatory myths. J Law Med Ethics 24(3):252–259

Fried C (1974) Medical experimentation: personal integrity and social policy. Elsevier, New York

Gangl M (2010) Causal inference in sociological research. Annu Rev Sociol 36:21–47

Geller D (1982) Alternatives to deception: why, what, and how? In: Sieber JE (ed) The ethics of social research: surveys and experiments. Springer, New York, pp 38–55

Gifford F (1986) The conflict between randomized clinical trials and the therapeutic obligation. J Med Philos 11:347–366

Gillon R (1994) Medical ethics: four principles plus attention to scope. Br Med J 309(6948):184–188

Goldthorpe J (2001) Causation, statistics, and sociology. Eur Sociol Rev 17(1):1–20

Guala F (2005) The methodology of experimental economics. Cambridge University Press, Cambridge

Guala F (2009) Methodological issues in experimental design and interpretation. In: Kincaid H, Ross D (eds) The Oxford handbook of philosophy of economics. Oxford University Press, Oxford, pp 280–305

Guala F (2012) Experimentation in economics. In: Mäki U (ed) Philosophy of economics. Elsevier/North Holland, Oxford, pp 597–640

Hacking I (1999) The social construction of what? Harvard University Press, Cambridge, MA

Hammersley M (2008) Paradigm war revived? On the diagnosis of resistance to randomized controlled trials and systematic review in education. Int J Res Method Educ 31(1):3–10

Hegtvedt K (2014) Ethics and experiments. In: Webster M, Sell J (eds) Laboratory experiments in the social sciences. Academic, London, pp 23–51

Holmes D (1976) ‘Debriefing after psychological experiments: I. Effectiveness of postdeception dehoaxing’ and ‘Debriefing after psychological experiments: II. Effectiveness of postexperimental desensitizing’. Am Psychol 32:858–875

Humphreys M (2015) Reflections on the ethics of social experimentation. J Glob Dev 6(1):87–112

Kaidesoja T (2017) Causal inference and modeling. In: McIntyre L, Rosenberg A (eds) The Routledge companion to philosophy of social science. Routledge, London, pp 202–213

Kelman H (1982) Ethical issues in different social science methods. In: Beauchamp T et al (eds) Ethical issues in social science research. John Hopkins University Press, Baltimore, pp 40–98

Kuorikoski J, Marchionni C (2014) Philosophy of economics. In: French S, Saatsi J (eds) The Bloomsbury companion to the philosophy of science. Bloomsbury, London, pp 314–333

Levine R (1979) Clarifying the concepts of research ethics. Hast Cent Rep 9(3):21–26

Lilford R, Jackson J (1995) Equipoise and the ethics of randomization. J R Soc Med 88(10):552–559

Miller F, Brody H (2003) A critique of clinical equipoise: therapeutic misconception in the ethics of clinical trials. Hast Cent Rep 33(3):19–28

Miller P, Weijer C (2006) Fiduciary obligation in clinical research. J Law Med Ethics 34(2):424–440

Mitchell S (2009) Unsimple truths: science, complexity, and policy. University of Chicago Press, Chicago

Morton R, Williams K (2010) Experimental political science and the study of causality: from nature to the lab. Cambridge University Press, Cambridge, UK

Oakley A et al (2003) Using random allocation to evaluate social interventions: three recent UK examples. Ann Am Acad Pol Soc Sci 589(1):170–189

Papineau D (1994) The virtues of randomization. Br J Philos Sci 45:437–450

Pearl J (2000) Causality-models, reasoning and inference. Cambridge University Press, Cambridge, UK

Risjord M (2014) Philosophy of social science: a contemporary introduction. Routledge, London

Sieber, Joan (1982) Ethical dilemmas in social research. In: Sieber J (ed) The ethics of social research: surveys and experiments. Springer, New York, pp 1–29

Sieber J (1992) Planning ethically responsible research: a guide for students and internal review boards. Sage, Newbury Park

Sobel M (1996) An introduction to causal inference. Sociol Methods Res 24(3):353–379

Sullivan J (2009) The multiplicity of experimental protocols. A challenge to reductionist and non-reductionist models of the unity of neuroscience. Synthese 167:511–539

Urbach P (1985) Randomization and the design of experiments. Philos Sci 52:256–273

Veatch R (2007) The irrelevance of equipoise. J Med Philos 32(2):167–183

Wilholt T (2009) Bias and values in scientific research. Stud Hist Phil Sci 40(1):92–101

Woodward J (2008) Invariance, modularity, and all that. Cartwright on causation. In: Cartwright N et al (eds) Nancy Cartwright’s philosophy of science. Routledge, New York, pp 198–237

Worrall J (2002) What evidence in evidence-based medicine? Philos Sci 69(3):316–330

Worrall J (2007) Why there’s no cause to randomize. Br J Philos Sci 58(3):451–488

Download references

Author information

Authors and affiliations.

Institute of Ethics, School of Theology, Philosophy and Music, Faculty of Humanities and Social Sciences, Dublin City University, Dublin, Ireland

Jonathan Lewis

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Jonathan Lewis .

Editor information

Editors and affiliations.

Chatelaillon Plage, France

Ron Iphofen

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Switzerland AG

About this entry

Cite this entry.

Lewis, J. (2020). Experimental Design. In: Iphofen, R. (eds) Handbook of Research Ethics and Scientific Integrity. Springer, Cham. https://doi.org/10.1007/978-3-030-16759-2_19

Download citation

DOI : https://doi.org/10.1007/978-3-030-16759-2_19

Published : 02 April 2020

Publisher Name : Springer, Cham

Print ISBN : 978-3-030-16758-5

Online ISBN : 978-3-030-16759-2

eBook Packages : Religion and Philosophy Reference Module Humanities and Social Sciences Reference Module Humanities

Share this entry

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

14.1 What is experimental design and when should you use it?

Learning objectives.

Learners will be able to…

• Describe the purpose of experimental design research
• Describe nomethetic causality and the logic of experimental design
• Identify the characteristics of a basic experiment
• Discuss the relationship between dependent and independent variables in experiments
• Identify the three major types of experimental designs

Pre-awareness check (Knowledge)

What are your thoughts on the phrase ‘experiment’ in the realm of social sciences? In an experiment, what is the independent variable?

The basics of experiments

In social work research, experimental design is used to test the effects of treatments, interventions, programs, or other conditions to which individuals, groups, organizations, or communities may be exposed to. There are a lot of experiments social work researchers can use to explore topics such as treatments for depression, impacts of school-based mental health on student outcomes, or prevention of abuse of people with disabilities. The American Psychological Association defines an experiment   as:

a series of observations conducted under controlled conditions to study a relationship with the purpose of drawing causal inferences about that relationship. An experiment involves the manipulation of an independent variable , the measurement of a dependent variable , and the exposure of various participants to one or more of the conditions being studied. Random selection of participants and their random assignment to conditions also are necessary in experiments .

In experimental design, the independent variable is the intervention, treatment, or condition that is being investigated as a potential cause of change (i.e., the experimental condition ). The effect, or outcome, of the experimental condition is the dependent variable. Trying out a new restaurant, dating a new person – we often call these things “experiments.” However, a true social science experiment would include recruitment of a large enough sample, random assignment to control and experimental groups, exposing those in the experimental group to an experimental condition, and collecting observations at the end of the experiment.

Social scientists use this level of rigor and control to maximize the internal validity of their research. Internal validity is the confidence researchers have about whether the independent variable (e.g, treatment) truly produces a change in the dependent, or outcome, variable. The logic and features of experimental design are intended to help establish causality and to reduce threats to internal validity , which we will discuss in Section 14.5 .

Experiments attempt to establish a nomothetic causal relationship between two variables—the treatment and its intended outcome.  We discussed the four criteria for establishing nomothetic causality in Section 4.3 :

• plausibility,
• covariation,
• temporality, and
• nonspuriousness.

Experiments should establish plausibility , having a plausible reason why their intervention would cause changes in the dependent variable. Usually, a theory framework or previous empirical evidence will indicate the plausibility of a causal relationship.

Covariation can be established for causal explanations by showing that the “cause” and the “effect” change together.  In experiments, the cause is an intervention, treatment, or other experimental condition. Whether or not a research participant is exposed to the experimental condition is the independent variable. The effect in an experiment is the outcome being assessed and is the dependent variable in the study. When the independent and dependent variables covary, they can have a positive association (e.g., those exposed to the intervention have increased self-esteem) or a negative association (e.g., those exposed to the intervention have reduced anxiety).

Since researcher controls when the intervention is administered, they can be assured that changes in the independent variable (the treatment) happens before changes in the dependent variable (the outcome). In this way, experiments assure temporality .

Finally, one of the most important features of experiments is that they allow researchers to eliminate spurious variables to support the criterion of nonspuriousness . True experiments are usually conducted under strictly controlled conditions. The intervention is given in the same way to each person, with a minimal number of other variables that might cause their post-test scores to change.

The logic of experimental design

How do we know that one phenomenon causes another? The complexity of the social world in which we practice and conduct research means that causes of social problems are rarely cut and dry. Uncovering explanations for social problems is key to helping clients address them, and experimental research designs are one road to finding answers.

Just because two phenomena are related in some way doesn’t mean that one causes the other. Ice cream sales increase in the summer, and so does the rate of violent crime; does that mean that eating ice cream is going to make me violent? Obviously not, because ice cream is great. The reality of that association is far more complex—it could be that hot weather makes people more irritable and, at times, violent, while also making people want ice cream. More likely, though, there are other social factors not accounted for in the way we just described this association.

As we have discussed, experimental designs can help clear up at least some of this fog by allowing researchers to isolate the effect of interventions on dependent variables by controlling extraneous variables . In true experimental design (discussed in the next section) and quasi-experimental design, researchers accomplish this w ith a control group or comparison group and the experimental group . The experimental group is sometimes called the treatment group because people in the experimental group receive the treatment or are exposed to the experimental condition (but we will call it the experimental group in this chapter.) The control/comparison group does not receive the treatment or intervention. Instead they may receive what is known as “treatment as usual” or perhaps no treatment at all.

In a well-designed experiment, the control group should look almost identical to the experimental group in terms of demographics and other relevant factors. What if we want to know the effect of CBT on social anxiety, but we have learned in prior research that men tend to have a more difficult time overcoming social anxiety? We would want our control and experimental groups to have a similar portions of men, since ostensibly, both groups’ results would be affected by the men in the group. If your control group has 5 women, 6 men, and 4 non-binary people, then your experimental group should be made up of roughly the same gender balance to help control for the influence of gender on the outcome of your intervention. (In reality, the groups should be similar along other dimensions, as well, and your group will likely be much larger.) The researcher will use the same outcome measures for both groups and compare them, and assuming the experiment was designed correctly, get a pretty good answer about whether the intervention had an effect on social anxiety.

Random assignment [/pb_glossary], also called randomization, entails using a random process to decide which participants are put into the control or experimental group (which participants receive an intervention and which do not). By randomly assigning participants to a group, you can reduce the effect of extraneous variables on your research because there won’t be a systematic difference between the groups.

Do not confuse random assignment with random sampling . Random sampling is a method for selecting a sample from a population and is rarely used in psychological research. Random assignment is a method for assigning participants in a sample to the different conditions, and it is an important element of all experimental research in psychology and other related fields. Random sampling helps a great deal with external validity, or generalizability , whereas random assignment increases internal validity .

Other Features of Experiments that Help Establish Causality

To control for spuriousness (as well as meeting the three other criteria for establishing causality), experiments try to control as many aspects of the research process as possible: using control groups, having large enough sample sizes, standardizing the treatment, etc. Researchers in large experiments often employ clinicians or other research staff to help them. Researchers train their staff members exhaustively, provide pre-scripted responses to common questions, and control the physical environment of the experiment so each person who participates receives the exact same treatment. Experimental researchers also document their procedures, so that others can review them and make changes in future research if they think it will improve on the ability to control for spurious variables.

An interesting example is Bruce Alexander’s (2010) Rat Park experiments. Much of the early research conducted on addictive drugs, like heroin and cocaine, was conducted on animals other than humans, usually mice or rats. The scientific consensus up until Alexander’s experiments was that cocaine and heroin were so addictive that rats, if offered the drugs, would consume them repeatedly until they perished. Researchers claimed this behavior explained how addiction worked in humans, but Alexander was not so sure. He knew rats were social animals and the experimental procedure from previous experiments did not allow them to socialize. Instead, rats were kept isolated in small cages with only food, water, and metal walls. To Alexander, social isolation was a spurious variable, causing changes in addictive behavior not due to the drug itself. Alexander created an experiment of his own, in which rats were allowed to run freely in an interesting environment, socialize and mate with other rats, and of course, drink from a solution that contained an addictive drug. In this environment, rats did not become hopelessly addicted to drugs. In fact, they had little interest in the substance. To Alexander, the results of his experiment demonstrated that social isolation was more of a causal factor for addiction than the drug itself.

One challenge with Alexander’s findings is that subsequent researchers have had mixed success replicating his findings (e.g., Petrie, 1996; Solinas, Thiriet, El Rawas, Lardeux, & Jaber, 2009). Replication involves conducting another researcher’s experiment in the same manner and seeing if it produces the same results. If the causal relationship is real, it should occur in all (or at least most) rigorous replications of the experiment.

Replicability

[INSERT A PARAGRAPH ABOUT REPLICATION/REPRODUCTION HERE. CAN USE/REFERENCE THIS   IF IT’S HELPFUL; include glossary definition as well as other general info]

To allow for easier replication, researchers should describe their experimental methods diligently. Researchers with the Open Science Collaboration (2015) [1] conducted the Reproducibility Project , which caused a significant controversy regarding the validity of psychological studies. The researchers with the project attempted to reproduce the results of 100 experiments published in major psychology journals since 2008. What they found was shocking. Although 97% of the original studies reported significant results, only 36% of the replicated studies had significant findings. The average effect size in the replication studies was half that of the original studies. The implications of the Reproducibility Project are potentially staggering, and encourage social scientists to carefully consider the validity of their reported findings and that the scientific community take steps to ensure researchers do not cherry-pick data or change their hypotheses simply to get published.

Generalizability

Let’s return to Alexander’s Rat Park study and consider the implications of his experiment for substance use professionals.  The conclusions he drew from his experiments on rats were meant to be generalized to the population. If this could be done, the experiment would have a high degree of external validity , which is the degree to which conclusions generalize to larger populations and different situations. Alexander argues his conclusions about addiction and social isolation help us understand why people living in deprived, isolated environments may become addicted to drugs more often than those in more enriching environments. Similarly, earlier rat researchers argued their results showed these drugs were instantly addictive to humans, often to the point of death.

Neither study’s results will match up perfectly with real life. There are clients in social work practice who may fit into Alexander’s social isolation model, but social isolation is complex. Clients can live in environments with other sociable humans, work jobs, and have romantic relationships; does this mean they are not socially isolated? On the other hand, clients may face structural racism, poverty, trauma, and other challenges that may contribute to their social environment. Alexander’s work helps understand clients’ experiences, but the explanation is incomplete. Human existence is more complicated than the experimental conditions in Rat Park.

Effectiveness versus Efficacy

Social workers are especially attentive to how social context shapes social life. This consideration points out a potential weakness of experiments. They can be rather artificial. When an experiment demonstrates causality under ideal, controlled circumstances, it establishes the efficacy of an intervention.

How often do real-world social interactions occur in the same way that they do in a controlled experiment? Experiments that are conducted in community settings by community practitioners are less easily controlled than those conducted in a lab or with researchers who adhere strictly to research protocols delivering the intervention. When an experiment demonstrates causality in a real-world setting that is not tightly controlled, it establishes the effectiveness of the intervention.

The distinction between efficacy and effectiveness demonstrates the tension between internal and external validity. Internal validity and external validity are conceptually linked. Internal validity refers to the degree to which the intervention causes its intended outcomes, and external validity refers to how well that relationship applies to different groups and circumstances than the experiment. However, the more researchers tightly control the environment to ensure internal validity, the more they may risk external validity for generalizing their results to different populations and circumstances. Correspondingly, researchers whose settings are just like the real world will be less able to ensure internal validity, as there are many factors that could pollute the research process. This is not to suggest that experimental research findings cannot have high levels of both internal and external validity, but that experimental researchers must always be aware of this potential weakness and clearly report limitations in their research reports.

Types of Experimental Designs

Experimental design is an umbrella term for a research method that is designed to test hypotheses related to causality under controlled conditions. Table 14.1 describes the three major types of experimental design (pre-experimental, quasi-experimental, and true experimental) and presents subtypes for each. As we will see in the coming sections, some types of experimental design are better at establishing causality than others. It’s also worth considering that true experiments, which most effectively establish causality , are often difficult and expensive to implement. Although the other experimental designs aren’t perfect, they still produce useful, valid evidence and may be more feasible to carry out.

Key Takeaways

• Experimental designs are useful for establishing causality, but some types of experimental design do this better than others.
• Experiments help researchers isolate the effect of the independent variable on the dependent variable by controlling for the effect of extraneous variables .
• Experiments use a control/comparison group and an experimental group to test the effects of interventions. These groups should be as similar to each other as possible in terms of demographics and other relevant factors.
• True experiments have control groups with randomly assigned participants; quasi-experimental types of experiments have comparison groups to which participants are not randomly assigned; pre-experimental designs do not have a comparison group.

TRACK 1 (IF YOU  ARE  CREATING A RESEARCH PROPOSAL FOR THIS CLASS):

• Think about the research project you’ve been designing so far. How might you use a basic experiment to answer your question? If your question isn’t explanatory, try to formulate a new explanatory question and consider the usefulness of an experiment.
• Why is establishing a simple relationship between two variables not indicative of one causing the other?

TRACK 2 (IF YOU  AREN’T  CREATING A RESEARCH PROPOSAL FOR THIS CLASS):

Imagine you are interested in studying child welfare practice. You are interested in learning more about community-based programs aimed to prevent child maltreatment and to prevent out-of-home placement for children.

• Think about the research project stated above. How might you use a basic experiment to look more into this research topic? Try to formulate an explanatory question and consider the usefulness of an experiment.
• Open Science Collaboration. (2015). Estimating the reproducibility of psychological science. Science, 349 (6251), aac4716. Doi: 10.1126/science.aac4716 ↵

an operation or procedure carried out under controlled conditions in order to discover an unknown effect or law, to test or establish a hypothesis, or to illustrate a known law.

treatment, intervention, or experience that is being tested in an experiment (the independent variable) that is received by the experimental group and not by the control group.

Ability to say that one variable "causes" something to happen to another variable. Very important to assess when thinking about studies that examine causation such as experimental or quasi-experimental designs.

circumstances or events that may affect the outcome of an experiment, resulting in changes in the research participants that are not a result of the intervention, treatment, or experimental condition being tested

causal explanations that can be universally applied to groups, such as scientific laws or universal truths

as a criteria for causal relationship, the relationship must make logical sense and seem possible

when the values of two variables change at the same time

as a criteria for causal relationship, the cause must come before the effect

an association between two variables that is NOT caused by a third variable

variables and characteristics that have an effect on your outcome, but aren't the primary variable whose influence you're interested in testing.

the group of participants in our study who do not receive the intervention we are researching in experiments with random assignment

the group of participants in our study who do not receive the intervention we are researching in experiments without random assignment

in experimental design, the group of participants in our study who do receive the intervention we are researching

The ability to apply research findings beyond the study sample to some broader population,

This is a synonymous term for generalizability - the ability to apply the findings of a study beyond the sample to a broader population.

performance of an intervention under ideal and controlled circumstances, such as in a lab or delivered by trained researcher-interventionists

The performance of an intervention under "real-world" conditions that are not closely controlled and ideal

the idea that one event, behavior, or belief will result in the occurrence of another, subsequent event, behavior, or belief

Doctoral Research Methods in Social Work Copyright © by Mavs Open Press. All Rights Reserved.

Share This Book

Experimental design: Guide, steps, examples

Last updated

27 April 2023

Reviewed by

Miroslav Damyanov

Short on time? Get an AI generated summary of this article instead

Experimental research design is a scientific framework that allows you to manipulate one or more variables while controlling the test environment. 

When testing a theory or new product, it can be helpful to have a certain level of control and manipulate variables to discover different outcomes. You can use these experiments to determine cause and effect or study variable associations. 

This guide explores the types of experimental design, the steps in designing an experiment, and the advantages and limitations of experimental design. 

Make research less tedious

Dovetail streamlines research to help you uncover and share actionable insights

• What is experimental research design?

You can determine the relationship between each of the variables by: 

Manipulating one or more independent variables (i.e., stimuli or treatments)

Applying the changes to one or more dependent variables (i.e., test groups or outcomes)

With the ability to analyze the relationship between variables and using measurable data, you can increase the accuracy of the result. 

What is a good experimental design?

A good experimental design requires: 

Significant planning to ensure control over the testing environment

Sound experimental treatments

Properly assigning subjects to treatment groups

Without proper planning, unexpected external variables can alter an experiment's outcome. 

To meet your research goals, your experimental design should include these characteristics:

Provide unbiased estimates of inputs and associated uncertainties

Enable the researcher to detect differences caused by independent variables

Include a plan for analysis and reporting of the results

Provide easily interpretable results with specific conclusions

What's the difference between experimental and quasi-experimental design?

The major difference between experimental and quasi-experimental design is the random assignment of subjects to groups. 

A true experiment relies on certain controls. Typically, the researcher designs the treatment and randomly assigns subjects to control and treatment groups. 

However, these conditions are unethical or impossible to achieve in some situations.

When it's unethical or impractical to assign participants randomly, that’s when a quasi-experimental design comes in. 

This design allows researchers to conduct a similar experiment by assigning subjects to groups based on non-random criteria. 

Another type of quasi-experimental design might occur when the researcher doesn't have control over the treatment but studies pre-existing groups after they receive different treatments.

When can a researcher conduct experimental research?

Various settings and professions can use experimental research to gather information and observe behavior in controlled settings. 

Basically, a researcher can conduct experimental research any time they want to test a theory with variable and dependent controls. 

Experimental research is an option when the project includes an independent variable and a desire to understand the relationship between cause and effect. 

• The importance of experimental research design

Experimental research enables researchers to conduct studies that provide specific, definitive answers to questions and hypotheses. 

Researchers can test Independent variables in controlled settings to:

Test the effectiveness of a new medication

Design better products for consumers

Answer questions about human health and behavior

Developing a quality research plan means a researcher can accurately answer vital research questions with minimal error. As a result, definitive conclusions can influence the future of the independent variable. 

Types of experimental research designs

There are three main types of experimental research design. The research type you use will depend on the criteria of your experiment, your research budget, and environmental limitations. 

Pre-experimental research design

A pre-experimental research study is a basic observational study that monitors independent variables’ effects. 

During research, you observe one or more groups after applying a treatment to test whether the treatment causes any change. 

The three subtypes of pre-experimental research design are:

One-shot case study research design

This research method introduces a single test group to a single stimulus to study the results at the end of the application. 

After researchers presume the stimulus or treatment has caused changes, they gather results to determine how it affects the test subjects. 

One-group pretest-posttest design

This method uses a single test group but includes a pretest study as a benchmark. The researcher applies a test before and after the group’s exposure to a specific stimulus. 

Static group comparison design

This method includes two or more groups, enabling the researcher to use one group as a control. They apply a stimulus to one group and leave the other group static. 

A posttest study compares the results among groups. 

True experimental research design

A true experiment is the most common research method. It involves statistical analysis to prove or disprove a specific hypothesis . 

Under completely experimental conditions, researchers expose participants in two or more randomized groups to different stimuli. 

Random selection removes any potential for bias, providing more reliable results. 

These are the three main sub-groups of true experimental research design:

Posttest-only control group design

This structure requires the researcher to divide participants into two random groups. One group receives no stimuli and acts as a control while the other group experiences stimuli.

Researchers perform a test at the end of the experiment to observe the stimuli exposure results.

Pretest-posttest control group design

This test also requires two groups. It includes a pretest as a benchmark before introducing the stimulus. 

The pretest introduces multiple ways to test subjects. For instance, if the control group also experiences a change, it reveals that taking the test twice changes the results.

Solomon four-group design

This structure divides subjects into two groups, with two as control groups. Researchers assign the first control group a posttest only and the second control group a pretest and a posttest. 

The two variable groups mirror the control groups, but researchers expose them to stimuli. The ability to differentiate between groups in multiple ways provides researchers with more testing approaches for data-based conclusions. 

Quasi-experimental research design

Although closely related to a true experiment, quasi-experimental research design differs in approach and scope. 

Quasi-experimental research design doesn’t have randomly selected participants. Researchers typically divide the groups in this research by pre-existing differences. 

Quasi-experimental research is more common in educational studies, nursing, or other research projects where it's not ethical or practical to use randomized subject groups.

• 5 steps for designing an experiment

Experimental research requires a clearly defined plan to outline the research parameters and expected goals. 

Here are five key steps in designing a successful experiment:

Step 1: Define variables and their relationship

Your experiment should begin with a question: What are you hoping to learn through your experiment? 

The relationship between variables in your study will determine your answer.

Define the independent variable (the intended stimuli) and the dependent variable (the expected effect of the stimuli). After identifying these groups, consider how you might control them in your experiment. 

Could natural variations affect your research? If so, your experiment should include a pretest and posttest. 

Step 2: Develop a specific, testable hypothesis

With a firm understanding of the system you intend to study, you can write a specific, testable hypothesis. 

What is the expected outcome of your study? 

Develop a prediction about how the independent variable will affect the dependent variable. 

How will the stimuli in your experiment affect your test subjects? 

Your hypothesis should provide a prediction of the answer to your research question . 

Step 3: Design experimental treatments to manipulate your independent variable

Depending on your experiment, your variable may be a fixed stimulus (like a medical treatment) or a variable stimulus (like a period during which an activity occurs). 

Determine which type of stimulus meets your experiment’s needs and how widely or finely to vary your stimuli. 

Step 4: Assign subjects to groups

When you have a clear idea of how to carry out your experiment, you can determine how to assemble test groups for an accurate study. 

When choosing your study groups, consider: 

The size of your experiment

Whether you can select groups randomly

Your target audience for the outcome of the study

You should be able to create groups with an equal number of subjects and include subjects that match your target audience. Remember, you should assign one group as a control and use one or more groups to study the effects of variables. 

Step 5: Plan how to measure your dependent variable

This step determines how you'll collect data to determine the study's outcome. You should seek reliable and valid measurements that minimize research bias or error. 

You can measure some data with scientific tools, while you’ll need to operationalize other forms to turn them into measurable observations.

• Advantages of experimental research

Experimental research is an integral part of our world. It allows researchers to conduct experiments that answer specific questions. 

While researchers use many methods to conduct different experiments, experimental research offers these distinct benefits:

Researchers can determine cause and effect by manipulating variables.

It gives researchers a high level of control.

Researchers can test multiple variables within a single experiment.

All industries and fields of knowledge can use it. 

Researchers can duplicate results to promote the validity of the study .

Replicating natural settings rapidly means immediate research.

Researchers can combine it with other research methods.

It provides specific conclusions about the validity of a product, theory, or idea.

• Disadvantages (or limitations) of experimental research

Unfortunately, no research type yields ideal conditions or perfect results. 

While experimental research might be the right choice for some studies, certain conditions could render experiments useless or even dangerous. 

Before conducting experimental research, consider these disadvantages and limitations:

Required professional qualification

Only competent professionals with an academic degree and specific training are qualified to conduct rigorous experimental research. This ensures results are unbiased and valid. 

Limited scope

Experimental research may not capture the complexity of some phenomena, such as social interactions or cultural norms. These are difficult to control in a laboratory setting.

Resource-intensive

Experimental research can be expensive, time-consuming, and require significant resources, such as specialized equipment or trained personnel.

Limited generalizability

The controlled nature means the research findings may not fully apply to real-world situations or people outside the experimental setting.

Practical or ethical concerns

Some experiments may involve manipulating variables that could harm participants or violate ethical guidelines . 

Researchers must ensure their experiments do not cause harm or discomfort to participants. 

Sometimes, recruiting a sample of people to randomly assign may be difficult. 

• Experimental research design example

Experiments across all industries and research realms provide scientists, developers, and other researchers with definitive answers. These experiments can solve problems, create inventions, and heal illnesses. 

Product design testing is an excellent example of experimental research. 

A company in the product development phase creates multiple prototypes for testing. With a randomized selection, researchers introduce each test group to a different prototype. 

When groups experience different product designs , the company can assess which option most appeals to potential customers. 

Experimental research design provides researchers with a controlled environment to conduct experiments that evaluate cause and effect. 

Using the five steps to develop a research plan ensures you anticipate and eliminate external variables while answering life’s crucial questions.

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 18 April 2023

Last updated: 27 February 2023

Last updated: 6 February 2023

Last updated: 15 January 2024

Last updated: 6 October 2023

Last updated: 5 February 2023

Last updated: 16 April 2023

Last updated: 7 March 2023

Last updated: 9 March 2023

Last updated: 12 December 2023

Last updated: 11 March 2024

Last updated: 13 May 2024

Latest articles

Related topics, .css-je19u9{-webkit-align-items:flex-end;-webkit-box-align:flex-end;-ms-flex-align:flex-end;align-items:flex-end;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;-webkit-box-flex-wrap:wrap;-webkit-flex-wrap:wrap;-ms-flex-wrap:wrap;flex-wrap:wrap;-webkit-box-pack:center;-ms-flex-pack:center;-webkit-justify-content:center;justify-content:center;row-gap:0;text-align:center;max-width:671px;}@media (max-width: 1079px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}}@media (max-width: 799px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}} decide what to .css-1kiodld{max-height:56px;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}@media (max-width: 1079px){.css-1kiodld{display:none;}} build next, decide what to build next.

Users report unexpectedly high data usage, especially during streaming sessions.

Users find it hard to navigate from the home page to relevant playlists in the app.

It would be great to have a sleep timer feature, especially for bedtime listening.

I need better filters to find the songs or artists I’m looking for.

• Types of experimental

Log in or sign up

Get started for free

Module 2: Research Design - Section 2

• Section 1 Discussion
• Section 2 Discussion

Section 2: Experimental Studies

Unlike a descriptive study, an experiment is a study in which a treatment, procedure, or program is intentionally introduced and a result or outcome is observed. The American Heritage Dictionary of the English Language defines an experiment as "A test under controlled conditions that is made to demonstrate a known truth, to examine the validity of a hypothesis, or to determine the efficacy of something previously untried."

This means that no matter who the participant is, he/she has an equal chance of getting into all of the groups or treatments in an experiment. This process helps to ensure that the groups or treatments are similar at the beginning of the study so that there is more confidence that the manipulation (group or treatment) "caused" the outcome. More information about random assignment may be found in section Random assignment.

Definition : An experiment is a study in which a treatment, procedure, or program is intentionally introduced and a result or outcome is observed.

Case Example for Experimental Study

Experimental studies — example 1.

Experimental Studies — Example 2

A fitness instructor wants to test the effectiveness of a performance-enhancing herbal supplement on students in her exercise class. To create experimental groups that are similar at the beginning of the study, the students are assigned into two groups at random (they can not choose which group they are in). Students in both groups are given a pill to take every day, but they do not know whether the pill is a placebo (sugar pill) or the herbal supplement. The instructor gives Group A the herbal supplement and Group B receives the placebo (sugar pill). The students' fitness level is compared before and after six weeks of consuming the supplement or the sugar pill. No differences in performance ability were found between the two groups suggesting that the herbal supplement was not effective.

Email Updates

Experimental Design: Types, Examples & Methods

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Experimental design refers to how participants are allocated to different groups in an experiment. Types of design include repeated measures, independent groups, and matched pairs designs.

Probably the most common way to design an experiment in psychology is to divide the participants into two groups, the experimental group and the control group, and then introduce a change to the experimental group, not the control group.

The researcher must decide how he/she will allocate their sample to the different experimental groups.  For example, if there are 10 participants, will all 10 participants participate in both groups (e.g., repeated measures), or will the participants be split in half and take part in only one group each?

Three types of experimental designs are commonly used:

1. Independent Measures

Independent measures design, also known as between-groups , is an experimental design where different participants are used in each condition of the independent variable.  This means that each condition of the experiment includes a different group of participants.

This should be done by random allocation, ensuring that each participant has an equal chance of being assigned to one group.

Independent measures involve using two separate groups of participants, one in each condition. For example:

• Con : More people are needed than with the repeated measures design (i.e., more time-consuming).
• Pro : Avoids order effects (such as practice or fatigue) as people participate in one condition only.  If a person is involved in several conditions, they may become bored, tired, and fed up by the time they come to the second condition or become wise to the requirements of the experiment!
• Con : Differences between participants in the groups may affect results, for example, variations in age, gender, or social background.  These differences are known as participant variables (i.e., a type of extraneous variable ).
• Control : After the participants have been recruited, they should be randomly assigned to their groups. This should ensure the groups are similar, on average (reducing participant variables).

2. Repeated Measures Design

Repeated Measures design is an experimental design where the same participants participate in each independent variable condition.  This means that each experiment condition includes the same group of participants.

Repeated Measures design is also known as within-groups or within-subjects design .

• Pro : As the same participants are used in each condition, participant variables (i.e., individual differences) are reduced.
• Con : There may be order effects. Order effects refer to the order of the conditions affecting the participants’ behavior.  Performance in the second condition may be better because the participants know what to do (i.e., practice effect).  Or their performance might be worse in the second condition because they are tired (i.e., fatigue effect). This limitation can be controlled using counterbalancing.
• Pro : Fewer people are needed as they participate in all conditions (i.e., saves time).
• Control : To combat order effects, the researcher counter-balances the order of the conditions for the participants.  Alternating the order in which participants perform in different conditions of an experiment.

Counterbalancing

Suppose we used a repeated measures design in which all of the participants first learned words in “loud noise” and then learned them in “no noise.”

We expect the participants to learn better in “no noise” because of order effects, such as practice. However, a researcher can control for order effects using counterbalancing.

The sample would be split into two groups: experimental (A) and control (B).  For example, group 1 does ‘A’ then ‘B,’ and group 2 does ‘B’ then ‘A.’ This is to eliminate order effects.

Although order effects occur for each participant, they balance each other out in the results because they occur equally in both groups.

3. Matched Pairs Design

A matched pairs design is an experimental design where pairs of participants are matched in terms of key variables, such as age or socioeconomic status. One member of each pair is then placed into the experimental group and the other member into the control group .

One member of each matched pair must be randomly assigned to the experimental group and the other to the control group.

• Con : If one participant drops out, you lose 2 PPs’ data.
• Pro : Reduces participant variables because the researcher has tried to pair up the participants so that each condition has people with similar abilities and characteristics.
• Con : Very time-consuming trying to find closely matched pairs.
• Pro : It avoids order effects, so counterbalancing is not necessary.
• Con : Impossible to match people exactly unless they are identical twins!
• Control : Members of each pair should be randomly assigned to conditions. However, this does not solve all these problems.

Experimental design refers to how participants are allocated to an experiment’s different conditions (or IV levels). There are three types:

1. Independent measures / between-groups : Different participants are used in each condition of the independent variable.

2. Repeated measures /within groups : The same participants take part in each condition of the independent variable.

3. Matched pairs : Each condition uses different participants, but they are matched in terms of important characteristics, e.g., gender, age, intelligence, etc.

Learning Check

Read about each of the experiments below. For each experiment, identify (1) which experimental design was used; and (2) why the researcher might have used that design.

1 . To compare the effectiveness of two different types of therapy for depression, depressed patients were assigned to receive either cognitive therapy or behavior therapy for a 12-week period.

The researchers attempted to ensure that the patients in the two groups had similar severity of depressed symptoms by administering a standardized test of depression to each participant, then pairing them according to the severity of their symptoms.

2 . To assess the difference in reading comprehension between 7 and 9-year-olds, a researcher recruited each group from a local primary school. They were given the same passage of text to read and then asked a series of questions to assess their understanding.

3 . To assess the effectiveness of two different ways of teaching reading, a group of 5-year-olds was recruited from a primary school. Their level of reading ability was assessed, and then they were taught using scheme one for 20 weeks.

At the end of this period, their reading was reassessed, and a reading improvement score was calculated. They were then taught using scheme two for a further 20 weeks, and another reading improvement score for this period was calculated. The reading improvement scores for each child were then compared.

4 . To assess the effect of the organization on recall, a researcher randomly assigned student volunteers to two conditions.

Condition one attempted to recall a list of words that were organized into meaningful categories; condition two attempted to recall the same words, randomly grouped on the page.

Experiment Terminology

Ecological validity.

The degree to which an investigation represents real-life experiences.

Experimenter effects

These are the ways that the experimenter can accidentally influence the participant through their appearance or behavior.

Demand characteristics

The clues in an experiment lead the participants to think they know what the researcher is looking for (e.g., the experimenter’s body language).

Independent variable (IV)

The variable the experimenter manipulates (i.e., changes) is assumed to have a direct effect on the dependent variable.

Dependent variable (DV)

Variable the experimenter measures. This is the outcome (i.e., the result) of a study.

Extraneous variables (EV)

All variables which are not independent variables but could affect the results (DV) of the experiment. Extraneous variables should be controlled where possible.

Confounding variables

Variable(s) that have affected the results (DV), apart from the IV. A confounding variable could be an extraneous variable that has not been controlled.

Random Allocation

Randomly allocating participants to independent variable conditions means that all participants should have an equal chance of taking part in each condition.

The principle of random allocation is to avoid bias in how the experiment is carried out and limit the effects of participant variables.

Order effects

Changes in participants’ performance due to their repeating the same or similar test more than once. Examples of order effects include:

(i) practice effect: an improvement in performance on a task due to repetition, for example, because of familiarity with the task;

(ii) fatigue effect: a decrease in performance of a task due to repetition, for example, because of boredom or tiredness.

Related Articles

Research Methodology

Discourse Analysis

Phenomenology In Qualitative Research

Ethnography In Qualitative Research

Narrative Analysis In Qualitative Research

Thematic Analysis: A Step by Step Guide

Metasynthesis Of Qualitative Research

Experimental Research Design — 6 mistakes you should never make!

Since school days’ students perform scientific experiments that provide results that define and prove the laws and theorems in science. These experiments are laid on a strong foundation of experimental research designs.

An experimental research design helps researchers execute their research objectives with more clarity and transparency.

In this article, we will not only discuss the key aspects of experimental research designs but also the issues to avoid and problems to resolve while designing your research study.

Table of Contents

What Is Experimental Research Design?

Experimental research design is a framework of protocols and procedures created to conduct experimental research with a scientific approach using two sets of variables. Herein, the first set of variables acts as a constant, used to measure the differences of the second set. The best example of experimental research methods is quantitative research .

Experimental research helps a researcher gather the necessary data for making better research decisions and determining the facts of a research study.

When Can a Researcher Conduct Experimental Research?

A researcher can conduct experimental research in the following situations —

• When time is an important factor in establishing a relationship between the cause and effect.
• When there is an invariable or never-changing behavior between the cause and effect.
• Finally, when the researcher wishes to understand the importance of the cause and effect.

Importance of Experimental Research Design

To publish significant results, choosing a quality research design forms the foundation to build the research study. Moreover, effective research design helps establish quality decision-making procedures, structures the research to lead to easier data analysis, and addresses the main research question. Therefore, it is essential to cater undivided attention and time to create an experimental research design before beginning the practical experiment.

By creating a research design, a researcher is also giving oneself time to organize the research, set up relevant boundaries for the study, and increase the reliability of the results. Through all these efforts, one could also avoid inconclusive results. If any part of the research design is flawed, it will reflect on the quality of the results derived.

Types of Experimental Research Designs

Based on the methods used to collect data in experimental studies, the experimental research designs are of three primary types:

1. Pre-experimental Research Design

A research study could conduct pre-experimental research design when a group or many groups are under observation after implementing factors of cause and effect of the research. The pre-experimental design will help researchers understand whether further investigation is necessary for the groups under observation.

Pre-experimental research is of three types —

• One-shot Case Study Research Design
• One-group Pretest-posttest Research Design
• Static-group Comparison

2. True Experimental Research Design

A true experimental research design relies on statistical analysis to prove or disprove a researcher’s hypothesis. It is one of the most accurate forms of research because it provides specific scientific evidence. Furthermore, out of all the types of experimental designs, only a true experimental design can establish a cause-effect relationship within a group. However, in a true experiment, a researcher must satisfy these three factors —

• There is a control group that is not subjected to changes and an experimental group that will experience the changed variables
• A variable that can be manipulated by the researcher
• Random distribution of the variables

This type of experimental research is commonly observed in the physical sciences.

3. Quasi-experimental Research Design

The word “Quasi” means similarity. A quasi-experimental design is similar to a true experimental design. However, the difference between the two is the assignment of the control group. In this research design, an independent variable is manipulated, but the participants of a group are not randomly assigned. This type of research design is used in field settings where random assignment is either irrelevant or not required.

The classification of the research subjects, conditions, or groups determines the type of research design to be used.

Advantages of Experimental Research

Experimental research allows you to test your idea in a controlled environment before taking the research to clinical trials. Moreover, it provides the best method to test your theory because of the following advantages:

• Researchers have firm control over variables to obtain results.
• The subject does not impact the effectiveness of experimental research. Anyone can implement it for research purposes.
• The results are specific.
• Post results analysis, research findings from the same dataset can be repurposed for similar research ideas.
• Researchers can identify the cause and effect of the hypothesis and further analyze this relationship to determine in-depth ideas.
• Experimental research makes an ideal starting point. The collected data could be used as a foundation to build new research ideas for further studies.

6 Mistakes to Avoid While Designing Your Research

There is no order to this list, and any one of these issues can seriously compromise the quality of your research. You could refer to the list as a checklist of what to avoid while designing your research.

1. Invalid Theoretical Framework

Usually, researchers miss out on checking if their hypothesis is logical to be tested. If your research design does not have basic assumptions or postulates, then it is fundamentally flawed and you need to rework on your research framework.

2. Inadequate Literature Study

Without a comprehensive research literature review , it is difficult to identify and fill the knowledge and information gaps. Furthermore, you need to clearly state how your research will contribute to the research field, either by adding value to the pertinent literature or challenging previous findings and assumptions.

3. Insufficient or Incorrect Statistical Analysis

Statistical results are one of the most trusted scientific evidence. The ultimate goal of a research experiment is to gain valid and sustainable evidence. Therefore, incorrect statistical analysis could affect the quality of any quantitative research.

4. Undefined Research Problem

This is one of the most basic aspects of research design. The research problem statement must be clear and to do that, you must set the framework for the development of research questions that address the core problems.

5. Research Limitations

Every study has some type of limitations . You should anticipate and incorporate those limitations into your conclusion, as well as the basic research design. Include a statement in your manuscript about any perceived limitations, and how you considered them while designing your experiment and drawing the conclusion.

6. Ethical Implications

The most important yet less talked about topic is the ethical issue. Your research design must include ways to minimize any risk for your participants and also address the research problem or question at hand. If you cannot manage the ethical norms along with your research study, your research objectives and validity could be questioned.

Experimental Research Design Example

In an experimental design, a researcher gathers plant samples and then randomly assigns half the samples to photosynthesize in sunlight and the other half to be kept in a dark box without sunlight, while controlling all the other variables (nutrients, water, soil, etc.)

By comparing their outcomes in biochemical tests, the researcher can confirm that the changes in the plants were due to the sunlight and not the other variables.

Experimental research is often the final form of a study conducted in the research process which is considered to provide conclusive and specific results. But it is not meant for every research. It involves a lot of resources, time, and money and is not easy to conduct, unless a foundation of research is built. Yet it is widely used in research institutes and commercial industries, for its most conclusive results in the scientific approach.

Have you worked on research designs? How was your experience creating an experimental design? What difficulties did you face? Do write to us or comment below and share your insights on experimental research designs!

Frequently Asked Questions

Randomization is important in an experimental research because it ensures unbiased results of the experiment. It also measures the cause-effect relationship on a particular group of interest.

Experimental research design lay the foundation of a research and structures the research to establish quality decision making process.

There are 3 types of experimental research designs. These are pre-experimental research design, true experimental research design, and quasi experimental research design.

The difference between an experimental and a quasi-experimental design are: 1. The assignment of the control group in quasi experimental research is non-random, unlike true experimental design, which is randomly assigned. 2. Experimental research group always has a control group; on the other hand, it may not be always present in quasi experimental research.

Experimental research establishes a cause-effect relationship by testing a theory or hypothesis using experimental groups or control variables. In contrast, descriptive research describes a study or a topic by defining the variables under it and answering the questions related to the same.

good and valuable

Very very good

Good presentation.

Rate this article Cancel Reply

Your email address will not be published.

Enago Academy's Most Popular Articles

Ensuring Academic Integrity and Transparency in Academic Research: A comprehensive checklist for researchers

Academic integrity is the foundation upon which the credibility and value of scientific findings are…

• Publishing Research
• Reporting Research

How to Optimize Your Research Process: A step-by-step guide

For researchers across disciplines, the path to uncovering novel findings and insights is often filled…

• Industry News
• Trending Now

Breaking Barriers: Sony and Nature unveil “Women in Technology Award”

Sony Group Corporation and the prestigious scientific journal Nature have collaborated to launch the inaugural…

Achieving Research Excellence: Checklist for good research practices

Academia is built on the foundation of trustworthy and high-quality research, supported by the pillars…

• Promoting Research

Plain Language Summary — Communicating your research to bridge the academic-lay gap

Science can be complex, but does that mean it should not be accessible to the…

Choosing the Right Analytical Approach: Thematic analysis vs. content analysis for…

Comparing Cross Sectional and Longitudinal Studies: 5 steps for choosing the right…

Research Recommendations – Guiding policy-makers for evidence-based decision making

Sign-up to read more

Subscribe for free to get unrestricted access to all our resources on research writing and academic publishing including:

• 2000+ blog articles
• 50+ Webinars
• 10+ Expert podcasts
• 50+ Infographics
• 10+ Checklists
• Research Guides

We hate spam too. We promise to protect your privacy and never spam you.

I am looking for Editing/ Proofreading services for my manuscript Tentative date of next journal submission:

What would be most effective in reducing research misconduct?

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• Quasi-Experimental Design | Definition, Types & Examples

Quasi-Experimental Design | Definition, Types & Examples

Published on July 31, 2020 by Lauren Thomas . Revised on January 22, 2024.

Like a true experiment , a quasi-experimental design aims to establish a cause-and-effect relationship between an independent and dependent variable .

However, unlike a true experiment, a quasi-experiment does not rely on random assignment . Instead, subjects are assigned to groups based on non-random criteria.

Quasi-experimental design is a useful tool in situations where true experiments cannot be used for ethical or practical reasons.

Table of contents

Differences between quasi-experiments and true experiments, types of quasi-experimental designs, when to use quasi-experimental design, advantages and disadvantages, other interesting articles, frequently asked questions about quasi-experimental designs.

There are several common differences between true and quasi-experimental designs.

Example of a true experiment vs a quasi-experiment

However, for ethical reasons, the directors of the mental health clinic may not give you permission to randomly assign their patients to treatments. In this case, you cannot run a true experiment.

Instead, you can use a quasi-experimental design.

You can use these pre-existing groups to study the symptom progression of the patients treated with the new therapy versus those receiving the standard course of treatment.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

Many types of quasi-experimental designs exist. Here we explain three of the most common types: nonequivalent groups design, regression discontinuity, and natural experiments.

Nonequivalent groups design

In nonequivalent group design, the researcher chooses existing groups that appear similar, but where only one of the groups experiences the treatment.

In a true experiment with random assignment , the control and treatment groups are considered equivalent in every way other than the treatment. But in a quasi-experiment where the groups are not random, they may differ in other ways—they are nonequivalent groups .

When using this kind of design, researchers try to account for any confounding variables by controlling for them in their analysis or by choosing groups that are as similar as possible.

This is the most common type of quasi-experimental design.

Regression discontinuity

Many potential treatments that researchers wish to study are designed around an essentially arbitrary cutoff, where those above the threshold receive the treatment and those below it do not.

Near this threshold, the differences between the two groups are often so minimal as to be nearly nonexistent. Therefore, researchers can use individuals just below the threshold as a control group and those just above as a treatment group.

However, since the exact cutoff score is arbitrary, the students near the threshold—those who just barely pass the exam and those who fail by a very small margin—tend to be very similar, with the small differences in their scores mostly due to random chance. You can therefore conclude that any outcome differences must come from the school they attended.

Natural experiments

In both laboratory and field experiments, researchers normally control which group the subjects are assigned to. In a natural experiment, an external event or situation (“nature”) results in the random or random-like assignment of subjects to the treatment group.

Even though some use random assignments, natural experiments are not considered to be true experiments because they are observational in nature.

Although the researchers have no control over the independent variable , they can exploit this event after the fact to study the effect of the treatment.

However, as they could not afford to cover everyone who they deemed eligible for the program, they instead allocated spots in the program based on a random lottery.

Although true experiments have higher internal validity , you might choose to use a quasi-experimental design for ethical or practical reasons.

Sometimes it would be unethical to provide or withhold a treatment on a random basis, so a true experiment is not feasible. In this case, a quasi-experiment can allow you to study the same causal relationship without the ethical issues.

The Oregon Health Study is a good example. It would be unethical to randomly provide some people with health insurance but purposely prevent others from receiving it solely for the purposes of research.

However, since the Oregon government faced financial constraints and decided to provide health insurance via lottery, studying this event after the fact is a much more ethical approach to studying the same problem.

True experimental design may be infeasible to implement or simply too expensive, particularly for researchers without access to large funding streams.

At other times, too much work is involved in recruiting and properly designing an experimental intervention for an adequate number of subjects to justify a true experiment.

In either case, quasi-experimental designs allow you to study the question by taking advantage of data that has previously been paid for or collected by others (often the government).

Quasi-experimental designs have various pros and cons compared to other types of studies.

• Higher external validity than most true experiments, because they often involve real-world interventions instead of artificial laboratory settings.
• Higher internal validity than other non-experimental types of research, because they allow you to better control for confounding variables than other types of studies do.
• Lower internal validity than true experiments—without randomization, it can be difficult to verify that all confounding variables have been accounted for.
• The use of retrospective data that has already been collected for other purposes can be inaccurate, incomplete or difficult to access.

Prevent plagiarism. Run a free check.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Degrees of freedom
• Null hypothesis
• Discourse analysis
• Control groups
• Mixed methods research
• Non-probability sampling
• Quantitative research
• Ecological validity

Research bias

• Rosenthal effect
• Implicit bias
• Cognitive bias
• Selection bias
• Negativity bias
• Status quo bias

A quasi-experiment is a type of research design that attempts to establish a cause-and-effect relationship. The main difference with a true experiment is that the groups are not randomly assigned.

In experimental research, random assignment is a way of placing participants from your sample into different groups using randomization. With this method, every member of the sample has a known or equal chance of being placed in a control group or an experimental group.

Quasi-experimental design is most useful in situations where it would be unethical or impractical to run a true experiment .

Quasi-experiments have lower internal validity than true experiments, but they often have higher external validity  as they can use real-world interventions instead of artificial laboratory settings.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Thomas, L. (2024, January 22). Quasi-Experimental Design | Definition, Types & Examples. Scribbr. Retrieved June 18, 2024, from https://www.scribbr.com/methodology/quasi-experimental-design/

Is this article helpful?

Lauren Thomas

Other students also liked, guide to experimental design | overview, steps, & examples, random assignment in experiments | introduction & examples, control variables | what are they & why do they matter, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”