how do you write an introduction for a research paper in apa

How to Write a Research Paper Introduction (with Examples)

Table of Contents

The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation.

The research paper introduction aims to present the topic to the reader. A study will only be accepted for publishing if you can ascertain that the available literature cannot answer your research question. So it is important to ensure that you have read important studies on that particular topic, especially those within the last five to ten years, and that they are properly referenced in this section. 1

What should be included in the research paper introduction is decided by what you want to tell readers about the reason behind the research and how you plan to fill the knowledge gap. The best research paper introduction provides a systemic review of existing work and demonstrates additional work that needs to be done. It needs to be brief, captivating, and well-referenced; a well-drafted research paper introduction will help the researcher win half the battle.

The introduction for a research paper is where you set up your topic and approach for the reader. It has several key goals:

• Present your research topic
• Capture reader interest
• Summarize existing research
• Position your own approach
• Define your specific research problem and problem statement
• Highlight the novelty and contributions of the study
• Give an overview of the paper’s structure

The research paper introduction can vary in size and structure depending on whether your paper presents the results of original empirical research or is a review paper. Some research paper introduction examples are only half a page while others are a few pages long. In many cases, the introduction will be shorter than all of the other sections of your paper; its length depends on the size of your paper as a whole.

What is the introduction for a research paper?

The introduction in a research paper is placed at the beginning to guide the reader from a broad subject area to the specific topic that your research addresses. They present the following information to the reader

• Scope: The topic covered in the research paper
• Context: Background of your topic
• Importance: Why your research matters in that particular area of research and the industry problem that can be targeted

Why is the introduction important in a research paper?

The research paper introduction conveys a lot of information and can be considered an essential roadmap for the rest of your paper. A good introduction for a research paper is important for the following reasons:

• It stimulates your reader’s interest: A good introduction section can make your readers want to read your paper by capturing their interest. It informs the reader what they are going to learn and helps determine if the topic is of interest to them.
• It helps the reader understand the research background: Without a clear introduction, your readers may feel confused and even struggle when reading your paper. A good research paper introduction will prepare them for the in-depth research to come. It provides you the opportunity to engage with the readers and demonstrate your knowledge and authority on the specific topic.
• It explains why your research paper is worth reading: Your introduction can convey a lot of information to your readers. It introduces the topic, why the topic is important, and how you plan to proceed with your research.
• It helps guide the reader through the rest of the paper: The research paper introduction gives the reader a sense of the nature of the information that will support your arguments and the general organization of the paragraphs that will follow.

What are the parts of introduction in the research?

A good research paper introduction section should comprise three main elements: 2

• What is known: This sets the stage for your research. It informs the readers of what is known on the subject.
• What is lacking: This is aimed at justifying the reason for carrying out your research. This could involve investigating a new concept or method or building upon previous research.
• What you aim to do: This part briefly states the objectives of your research and its major contributions. Your detailed hypothesis will also form a part of this section.

How to write a research paper introduction?

The first step in writing the research paper introduction is to inform the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening statement. The second step involves establishing the kinds of research that have been done and ending with limitations or gaps in the research that you intend to address.

Finally, the research paper introduction clarifies how your own research fits in and what problem it addresses. If your research involved testing hypotheses, these should be stated along with your research question. The hypothesis should be presented in the past tense since it will have been tested by the time you are writing the research paper introduction.

The following key points, with examples, can guide you when writing the research paper introduction section:

1. Introduce the research topic:

• Highlight the importance of the research field or topic
• Describe the background of the topic
• Present an overview of current research on the topic

Example: The inclusion of experiential and competency-based learning has benefitted electronics engineering education. Industry partnerships provide an excellent alternative for students wanting to engage in solving real-world challenges. Industry-academia participation has grown in recent years due to the need for skilled engineers with practical training and specialized expertise. However, from the educational perspective, many activities are needed to incorporate sustainable development goals into the university curricula and consolidate learning innovation in universities.

2. Determine a research niche:

• Reveal a gap in existing research or oppose an existing assumption
• Formulate the research question

Example: There have been plausible efforts to integrate educational activities in higher education electronics engineering programs. However, very few studies have considered using educational research methods for performance evaluation of competency-based higher engineering education, with a focus on technical and or transversal skills. To remedy the current need for evaluating competencies in STEM fields and providing sustainable development goals in engineering education, in this study, a comparison was drawn between study groups without and with industry partners.

3. Place your research within the research niche:

• State the purpose of your study
• Highlight the key characteristics of your study
• Describe important results
• Highlight the novelty of the study.
• Offer a brief overview of the structure of the paper.

Example: The study evaluates the main competency needed in the applied electronics course, which is a fundamental core subject for many electronics engineering undergraduate programs. We compared two groups, without and with an industrial partner, that offered real-world projects to solve during the semester. This comparison can help determine significant differences in both groups in terms of developing subject competency and achieving sustainable development goals.

Write a Research Paper Introduction in Minutes with Paperpal

Paperpal is a comprehensive AI academic writing assistant that helps you write 2x faster. Trained on millions of scholarly articles and leveraging over 22 years of STM expertise, Paperpal understands and preserves academic context. This ensures that its language suggestions and AI-generated text not only meets stringent linguistic standards but also aligns with academic writing conventions.  

If you’re stuck with writing a research paper introduction, Paperpal’s generative AI features can help you with the starting point and keep your writing momentum going. In this step-by-step guide, we’ll walk you through how Paperpal transforms your initial ideas into a polished and publication-ready introduction.

How to use Paperpal to write the Introduction section

Step 1: Sign up/log in to Paperpal and click on the Templates feature, under this choose Outlines > Research Article .

Step 2:  Choose the section of the research article you wish to get an outline for and fill the other details like Field of study,  Brief description of study.

Step 3: Based on your inputs, Paperpal generates an outline for your research paper introduction. Check the introduction and personalize it according to your research paper topic.

Step 4: Use this outline and sentence suggestions to develop your content, search for relevant references and cite them in your research paper draft effortlessly with Paperpal. 

Step 5: Once your research paper introduction is done, check for grammatical errors with Paperpal’s language checks and prepare it for submission. 

You can use the same process to develop each section of your article, and finally your research paper in half the time and without any of the stress.

Start Writing with Paperpal

Key points to remember

Remember the following key points for writing a good research paper introduction: 4

• Avoid stuffing too much general information: Avoid including what an average reader would know and include only that information related to the problem being addressed in the research paper introduction. For example, when describing a comparative study of non-traditional methods for mechanical design optimization, information related to the traditional methods and differences between traditional and non-traditional methods would not be relevant. In this case, the introduction for the research paper should begin with the state-of-the-art non-traditional methods and methods to evaluate the efficiency of newly developed algorithms.
• Avoid packing too many references: Cite only the required works in your research paper introduction. The other works can be included in the discussion section to strengthen your findings.
• Avoid extensive criticism of previous studies: Avoid being overly critical of earlier studies while setting the rationale for your study. A better place for this would be the Discussion section, where you can highlight the advantages of your method.
• Avoid describing conclusions of the study: When writing a research paper introduction remember not to include the findings of your study. The aim is to let the readers know what question is being answered. The actual answer should only be given in the Results and Discussion section.

To summarize, the research paper introduction section should be brief yet informative. It should convince the reader the need to conduct the study and motivate him to read further. If you’re feeling stuck or unsure, choose trusted AI academic writing assistants like Paperpal to effortlessly craft your research paper introduction and other sections of your research article.

Frequently Asked Questions

What is the purpose of the introduction in research papers.

The purpose of the research paper introduction is to introduce the reader to the problem definition, justify the need for the study, and describe the main theme of the study. The aim is to gain the reader’s attention by providing them with necessary background information and establishing the main purpose and direction of the research.

How long should the research paper introduction be?

The length of the research paper introduction can vary across journals and disciplines. While there are no strict word limits for writing the research paper introduction, an ideal length would be one page, with a maximum of 400 words over 1-4 paragraphs. Generally, it is one of the shorter sections of the paper as the reader is assumed to have at least a reasonable knowledge about the topic. 2

For example, for a study evaluating the role of building design in ensuring fire safety, there is no need to discuss definitions and nature of fire in the introduction; you could start by commenting upon the existing practices for fire safety and how your study will add to the existing knowledge and practice.

What should be included in the research paper introduction?

When deciding what to include in the research paper introduction, the rest of the paper should also be considered. The aim is to introduce the reader smoothly to the topic and facilitate an easy read without much dependency on external sources. 3

Below is a list of elements you can include to prepare a research paper introduction outline and follow it when you are writing the research paper introduction.

• Topic introduction: This can include key definitions and a brief history of the topic.
• Research context and background: Offer the readers some general information and then narrow it down to specific aspects.
• Details of the research you conducted: A brief literature review can be included to support your arguments or line of thought.
• Rationale for the study: This establishes the relevance of your study and establishes its importance.
• Importance of your research: The main contributions are highlighted to help establish the novelty of your study
• Research hypothesis: Introduce your research question and propose an expected outcome. Organization of the paper: Include a short paragraph of 3-4 sentences that highlights your plan for the entire paper

Should I include citations in the introduction for a research paper?

Cite only works that are most relevant to your topic; as a general rule, you can include one to three. Note that readers want to see evidence of original thinking. So it is better to avoid using too many references as it does not leave much room for your personal standpoint to shine through.

Citations in your research paper introduction support the key points, and the number of citations depend on the subject matter and the point discussed. If the research paper introduction is too long or overflowing with citations, it is better to cite a few review articles rather than the individual articles summarized in the review.

A good point to remember when citing research papers in the introduction section is to include at least one-third of the references in the introduction.

Should I provide a literature review in the research paper introduction?

The literature review plays a significant role in the research paper introduction section. A good literature review accomplishes the following:

• Introduces the topic
• Establishes the study’s significance
• Provides an overview of the relevant literature
• Provides context for the study using literature
• Identifies knowledge gaps

However, remember to avoid making the following mistakes when writing a research paper introduction:

• Do not use studies from the literature review to aggressively support your research
• Avoid direct quoting
• Do not allow literature review to be the focus of this section. Instead, the literature review should only aid in setting a foundation for the manuscript. 
• Jawaid, S. A., & Jawaid, M. (2019). How to write introduction and discussion. Saudi Journal of Anaesthesia, 13(Suppl 1), S18.
• Dewan, P., & Gupta, P. (2016). Writing the title, abstract and introduction: Looks matter!. Indian pediatrics, 53, 235-241.
• Cetin, S., & Hackam, D. J. (2005). An approach to the writing of a scientific Manuscript1. Journal of Surgical Research, 128(2), 165-167.
• Bavdekar, S. B. (2015). Writing introduction: Laying the foundations of a research paper. Journal of the Association of Physicians of India, 63(7), 44-6.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• Scientific Writing Style Guides Explained
• Ethical Research Practices For Research with Human Subjects
• 8 Most Effective Ways to Increase Motivation for Thesis Writing 
• 6 Tips for Post-Doc Researchers to Take Their Career to the Next Level

Practice vs. Practise: Learn the Difference

Academic paraphrasing: why paperpal’s rewrite should be your first choice , you may also like, what is scispace detailed review of features, pricing,..., what is the significance and use of post-hoc..., how to write a case study in research..., online ai writing tools: cost-efficient help for dissertation..., how to cite in apa format (7th edition):..., how to write your research paper in apa..., how to choose a dissertation topic, how to write a phd research proposal, how to write an academic paragraph (step-by-step guide), research funding basics: what should a grant proposal....

Purdue Online Writing Lab College of Liberal Arts

APA Formatting and Style Guide (7th Edition)

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

In-Text Citations

Resources on using in-text citations in APA style

Reference List

Resources on writing an APA style reference list, including citation formats

Other APA Resources

How to Write an APA Research Paper

Psychology/neuroscience 201, v iew in pdf format.

An APA-style paper includes the following sections: title page, abstract, introduction, method, results, discussion, and references. Your paper may also include one or more tables and/or figures. Different types of information about your study are addressed in each of the sections, as described below.

General formatting rules are as follows:

Do not put page breaks in between the introduction, method, results, and discussion sections.

The title page, abstract, references, table(s), and figure(s) should be on their own pages. The entire paper should be written in the past tense, in a 12-point font, double-spaced, and with one-inch margins all around.

(see sample on p. 41 of APA manual)

• Title should be between 10-12 words and should reflect content of paper (e.g., IV and DV).
• Title, your name, and Hamilton College are all double-spaced (no extra spaces)
• Create a page header using the “View header” function in MS Word. On the title page, the header should include the following: Flush left: Running head: THE RUNNING HEAD SHOULD BE IN ALL CAPITAL LETTERS. The running head is a short title that appears at the top of pages of published articles. It should not exceed 50 characters, including punctuation and spacing. (Note: on the title page, you actually write the words “Running head,” but these words do not appear on subsequent pages; just the actual running head does. If you make a section break between the title page and the rest of the paper you can make the header different for those two parts of the manuscript). Flush right, on same line: page number. Use the toolbox to insert a page number, so it will automatically number each page.

Abstract (labeled, centered, not bold)

No more than 120 words, one paragraph, block format (i.e., don’t indent), double-spaced.

• State topic, preferably in one sentence. Provide overview of method, results, and discussion.

Introduction

(Do not label as “Introduction.” Title of paper goes at the top of the page—not bold)

The introduction of an APA-style paper is the most difficult to write. A good introduction will summarize, integrate, and critically evaluate the empirical knowledge in the relevant area(s) in a way that sets the stage for your study and why you conducted it. The introduction starts out broad (but not too broad!) and gets more focused toward the end. Here are some guidelines for constructing a good introduction:

• Don’t put your readers to sleep by beginning your paper with the time-worn sentence, “Past research has shown (blah blah blah)” They’ll be snoring within a paragraph!  Try to draw your reader in by saying something interesting or thought-provoking right off the bat.  Take a look at articles you’ve read. Which ones captured your attention right away? How did the authors accomplish this task? Which ones didn’t?  Why not?  See if you can use articles you liked as a model. One way to begin (but not the only way) is to provide an example or anecdote illustrative of your topic area.
• Although you won’t go into the details of your study and hypotheses until the end of the intro, you should foreshadow your study a bit at the end of the first paragraph by stating your purpose briefly, to give your reader a schema for all the information you will present next.
• Your intro should be a logical flow of ideas that leads up to your hypothesis. Try to organize it in terms of the ideas rather than who did what when. In other words, your intro shouldn’t read like a story of “Schmirdley did such-and-such in 1991. Then Gurglehoff did something-or-other in 1993.  Then....(etc.)” First, brainstorm all of the ideas you think are necessary to include in your paper. Next, decide which ideas make sense to present first, second, third, and so forth, and think about how you want to transition between ideas. When an idea is complex, don’t be afraid to use a real-life example to clarify it for your reader. The introduction will end with a brief overview of your study and, finally, your specific hypotheses. The hypotheses should flow logically out of everything that’s been presented, so that the reader has the sense of, “Of course. This hypothesis makes complete sense, given all the other research that was presented.”
• When incorporating references into your intro, you do not necessarily need to describe every single study in complete detail, particularly if different studies use similar methodologies. Certainly you want to summarize briefly key articles, though, and point out differences in methods or findings of relevant studies when necessary. Don’t make one mistake typical of a novice APA-paper writer by stating overtly why you’re including a particular article (e.g., “This article is relevant to my study because…”). It should be obvious to the reader why you’re including a reference without your explicitly saying so.  DO NOT quote from the articles, instead paraphrase by putting the information in your own words.
• Be careful about citing your sources (see APA manual). Make sure there is a one-to-one correspondence between the articles you’ve cited in your intro and the articles listed in your reference section.
• Remember that your audience is the broader scientific community, not the other students in your class or your professor.  Therefore, you should assume they have a basic understanding of psychology, but you need to provide them with the complete information necessary for them to understand the research you are presenting.

Method (labeled, centered, bold)

The Method section of an APA-style paper is the most straightforward to write, but requires precision. Your goal is to describe the details of your study in such a way that another researcher could duplicate your methods exactly.

The Method section typically includes Participants, Materials and/or Apparatus, and Procedure sections. If the design is particularly complicated (multiple IVs in a factorial experiment, for example), you might also include a separate Design subsection or have a “Design and Procedure” section.

Note that in some studies (e.g., questionnaire studies in which there are many measures to describe but the procedure is brief), it may be more useful to present the Procedure section prior to the Materials section rather than after it.

Participants (labeled, flush left, bold)

Total number of participants (# women, # men), age range, mean and SD for age, racial/ethnic composition (if applicable), population type (e.g., college students). Remember to write numbers out when they begin a sentence.

• How were the participants recruited? (Don’t say “randomly” if it wasn’t random!) Were they compensated for their time in any way? (e.g., money, extra credit points)
• Write for a broad audience. Thus, do not write, “Students in Psych. 280...” Rather, write (for instance), “Students in a psychological statistics and research methods course at a small liberal arts college….”
• Try to avoid short, choppy sentences. Combine information into a longer sentence when possible.

Materials (labeled, flush left, bold)

Carefully describe any stimuli, questionnaires, and so forth. It is unnecessary to mention things such as the paper and pencil used to record the responses, the data recording sheet, the computer that ran the data analysis, the color of the computer, and so forth.

• If you included a questionnaire, you should describe it in detail. For instance, note how many items were on the questionnaire, what the response format was (e.g., a 5-point Likert-type scale ranging from 1 (strongly disagree) to 5 (strongly agree)), how many items were reverse-scored, whether the measure had subscales, and so forth. Provide a sample item or two for your reader.
• If you have created a new instrument, you should attach it as an Appendix.
• If you presented participants with various word lists to remember or stimuli to judge, you should describe those in detail here. Use subheadings to separate different types of stimuli if needed.  If you are only describing questionnaires, you may call this section “Measures.”

Apparatus (labeled, flush left, bold)

Include an apparatus section if you used specialized equipment for your study (e.g., the eye tracking machine) and need to describe it in detail.

Procedure (labeled, flush left, bold)

What did participants do, and in what order? When you list a control variable (e.g., “Participants all sat two feet from the experimenter.”), explain WHY you did what you did.  In other words, what nuisance variable were you controlling for? Your procedure should be as brief and concise as possible. Read through it. Did you repeat yourself anywhere? If so, how can you rearrange things to avoid redundancy? You may either write the instructions to the participants verbatim or paraphrase, whichever you deem more appropriate. Don’t forget to include brief statements about informed consent and debriefing.

Results (labeled, centered, bold)

In this section, describe how you analyzed the data and what you found. If your data analyses were complex, feel free to break this section down into labeled subsections, perhaps one section for each hypothesis.

• Include a section for descriptive statistics
• List what type of analysis or test you conducted to test each hypothesis.
• Refer to your Statistics textbook for the proper way to report results in APA style. A t-test, for example, is reported in the following format: t (18) = 3.57, p < .001, where 18 is the number of degrees of freedom (N – 2 for an independent-groups t test). For a correlation: r (32) = -.52, p < .001, where 32 is the number of degrees of freedom (N – 2 for a correlation). For a one-way ANOVA: F (2, 18) = 7.00, p < .001, where 2 represents the between and 18 represents df within Remember that if a finding has a p value greater than .05, it is “nonsignificant,” not “insignificant.” For nonsignificant findings, still provide the exact p values. For correlations, be sure to report the r 2 value as an assessment of the strength of the finding, to show what proportion of variability is shared by the two variables you’re correlating. For t- tests and ANOVAs, report eta 2 .
• Report exact p values to two or three decimal places (e.g., p = .042; see p. 114 of APA manual).  However, for p-values less than .001, simply put p < .001.
• Following the presentation of all the statistics and numbers, be sure to state the nature of your finding(s) in words and whether or not they support your hypothesis (e.g., “As predicted …”). This information can typically be presented in a sentence or two following the numbers (within the same paragraph). Also, be sure to include the relevant means and SDs.
• It may be useful to include a table or figure to represent your results visually. Be sure to refer to these in your paper (e.g., “As illustrated in Figure 1…”). Remember that you may present a set of findings either as a table or as a figure, but not as both. Make sure that your text is not redundant with your tables/figures. For instance, if you present a table of means and standard deviations, you do not need to also report these in the text. However, if you use a figure to represent your results, you may wish to report means and standard deviations in the text, as these may not always be precisely ascertained by examining the figure. Do describe the trends shown in the figure.
• Do not spend any time interpreting or explaining the results; save that for the Discussion section.

Discussion (labeled, centered, bold)

The goal of the discussion section is to interpret your findings and place them in the broader context of the literature in the area. A discussion section is like the reverse of the introduction, in that you begin with the specifics and work toward the more general (funnel out). Some points to consider:

• Begin with a brief restatement of your main findings (using words, not numbers). Did they support the hypothesis or not? If not, why not, do you think? Were there any surprising or interesting findings? How do your findings tie into the existing literature on the topic, or extend previous research? What do the results say about the broader behavior under investigation? Bring back some of the literature you discussed in the Introduction, and show how your results fit in (or don’t fit in, as the case may be). If you have surprising findings, you might discuss other theories that can help to explain the findings. Begin with the assumption that your results are valid, and explain why they might differ from others in the literature.
• What are the limitations of the study? If your findings differ from those of other researchers, or if you did not get statistically significant results, don’t spend pages and pages detailing what might have gone wrong with your study, but do provide one or two suggestions. Perhaps these could be incorporated into the future research section, below.
• What additional questions were generated from this study? What further research should be conducted on the topic? What gaps are there in the current body of research? Whenever you present an idea for a future research study, be sure to explain why you think that particular study should be conducted. What new knowledge would be gained from it?  Don’t just say, “I think it would be interesting to re-run the study on a different college campus” or “It would be better to run the study again with more participants.” Really put some thought into what extensions of the research might be interesting/informative, and why.
• What are the theoretical and/or practical implications of your findings? How do these results relate to larger issues of human thoughts, feelings, and behavior? Give your readers “the big picture.” Try to answer the question, “So what?

Final paragraph: Be sure to sum up your paper with a final concluding statement. Don’t just trail off with an idea for a future study. End on a positive note by reminding your reader why your study was important and what it added to the literature.

References (labeled, centered, not bold)

Provide an alphabetical listing of the references (alphabetize by last name of first author). Double-space all, with no extra spaces between references. The second line of each reference should be indented (this is called a hanging indent and is easily accomplished using the ruler in Microsoft Word). See the APA manual for how to format references correctly.

Examples of references to journal articles start on p. 198 of the manual, and examples of references to books and book chapters start on pp. 202. Digital object identifiers (DOIs) are now included for electronic sources (see pp. 187-192 of APA manual to learn more).

Journal article example: [Note that only the first letter of the first word of the article title is capitalized; the journal name and volume are italicized. If the journal name had multiple words, each of the major words would be capitalized.] 

Ebner-Priemer, U. W., & Trull, T. J. (2009). Ecological momentary assessment of mood disorders and mood dysregulation. Psychological Assessment, 21, 463-475. doi:10.1037/a0017075

Book chapter example: [Note that only the first letter of the first word of both the chapter title and book title are capitalized.]

Stephan, W. G. (1985). Intergroup relations. In G. Lindzey & E. Aronson (Eds.), The handbook of social psychology (3 rd ed., Vol. 2, pp. 599-658). New York: Random House.

Book example: Gray, P. (2010). Psychology (6 th ed.). New York: Worth

Table There are various formats for tables, depending upon the information you wish to include. See the APA manual. Be sure to provide a table number and table title (the latter is italicized). Tables can be single or double-spaced.

Figure If you have more than one figure, each one gets its own page. Use a sans serif font, such as Helvetica, for any text within your figure. Be sure to label your x- and y-axes clearly, and make sure you’ve noted the units of measurement of the DV. Underneath the figure provide a label and brief caption (e.g., “Figure 1. Mean evaluation of job applicant qualifications as a function of applicant attractiveness level”). The figure caption typically includes the IVs/predictor variables and the DV. Include error bars in your bar graphs, and note what the bars represent in the figure caption: Error bars represent one standard error above and below the mean.

In-Text Citations: (see pp. 174-179 of APA manual) When citing sources in your paper, you need to include the authors’ names and publication date.

You should use the following formats:

• When including the citation as part of the sentence, use AND: “According to Jones and Smith (2003), the…”
• When the citation appears in parentheses, use “&”: “Studies have shown that priming can affect actual motor behavior (Jones & Smith, 2003; Klein, Bailey, & Hammer, 1999).” The studies appearing in parentheses should be ordered alphabetically by the first author’s last name, and should be separated by semicolons.
• If you are quoting directly (which you should avoid), you also need to include the page number.
• For sources with three or more authors, once you have listed all the authors’ names, you may write “et al.” on subsequent mentions. For example: “Klein et al. (1999) found that….” For sources with two authors, both authors must be included every time the source is cited. When a source has six or more authors, the first author’s last name and “et al.” are used every time the source is cited (including the first time). 

Secondary Sources

“Secondary source” is the term used to describe material that is cited in another source. If in his article entitled “Behavioral Study of Obedience” (1963), Stanley Milgram makes reference to the ideas of Snow (presented above), Snow (1961) is the primary source, and Milgram (1963) is the secondary source.

Try to avoid using secondary sources in your papers; in other words, try to find the primary source and read it before citing it in your own work. If you must use a secondary source, however, you should cite it in the following way:

Snow (as cited in Milgram, 1963) argued that, historically, the cause of most criminal acts... The reference for the Milgram article (but not the Snow reference) should then appear in the reference list at the end of your paper.

Tutor Appointments

Peer tutor and consultant appointments are managed through TracCloud (login required). Find resources and more information about the ALEX centers using the following links.

Office / Department Name

Nesbitt-Johnston Writing Center

Contact Name

Jennifer Ambrose

Writing Center Director

Help us provide an accessible education, offer innovative resources and programs, and foster intellectual exploration.

Site Search