a consumer extended problem solving process has this key characteristic

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

3.2 Low-Involvement Versus High-Involvement Buying Decisions and the Consumer’s Decision-Making Process

Learning objectives.

Distinguish between low-involvement and high-involvement buying decisions.
Understand what the stages of the buying process are and what happens in each stage.

As you have seen, many factors influence a consumer’s behavior. Depending on a consumer’s experience and knowledge, some consumers may be able to make quick purchase decisions and other consumers may need to get information and be more involved in the decision process before making a purchase. The level of involvement reflects how personally important or interested you are in consuming a product and how much information you need to make a decision. The level of involvement in buying decisions may be considered a continuum from decisions that are fairly routine (consumers are not very involved) to decisions that require extensive thought and a high level of involvement. Whether a decision is low, high, or limited, involvement varies by consumer, not by product, although some products such as purchasing a house typically require a high-involvement for all consumers. Consumers with no experience purchasing a product may have more involvement than someone who is replacing a product.

You have probably thought about many products you want or need but never did much more than that. At other times, you’ve probably looked at dozens of products, compared them, and then decided not to purchase any one of them. When you run out of products such as milk or bread that you buy on a regular basis, you may buy the product as soon as you recognize the need because you do not need to search for information or evaluate alternatives. As Nike would put it, you “just do it.” Low-involvement decisions are, however, typically products that are relatively inexpensive and pose a low risk to the buyer if she makes a mistake by purchasing them.

Consumers often engage in routine response behavior when they make low-involvement decisions—that is, they make automatic purchase decisions based on limited information or information they have gathered in the past. For example, if you always order a Diet Coke at lunch, you’re engaging in routine response behavior. You may not even think about other drink options at lunch because your routine is to order a Diet Coke, and you simply do it. Similarly, if you run out of Diet Coke at home, you may buy more without any information search.

Some low-involvement purchases are made with no planning or previous thought. These buying decisions are called impulse buying . While you’re waiting to check out at the grocery store, perhaps you see a magazine with Angelina Jolie and Brad Pitt on the cover and buy it on the spot simply because you want it. You might see a roll of tape at a check-out stand and remember you need one or you might see a bag of chips and realize you’re hungry or just want them. These are items that are typically low-involvement decisions. Low-involvement decisions aren’t necessarily products purchased on impulse, although they can be.

By contrast, high-involvement decisions carry a higher risk to buyers if they fail, are complex, and/or have high price tags. A car, a house, and an insurance policy are examples. These items are not purchased often but are relevant and important to the buyer. Buyers don’t engage in routine response behavior when purchasing high-involvement products. Instead, consumers engage in what’s called extended problem solving , where they spend a lot of time comparing different aspects such as the features of the products, prices, and warranties.

High-involvement decisions can cause buyers a great deal of postpurchase dissonance (anxiety) if they are unsure about their purchases or if they had a difficult time deciding between two alternatives. Companies that sell high-involvement products are aware that postpurchase dissonance can be a problem. Frequently, they try to offer consumers a lot of information about their products, including why they are superior to competing brands and how they won’t let the consumer down. Salespeople may be utilized to answer questions and do a lot of customer “hand-holding.”

Allstate’s “You’re in Good Hands” advertisements are designed to convince consumers that the insurance company won’t let them down.

Mike Mozart – Allstate, – CC BY 2.0.

Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip. While you are familiar with backpacks, you know that new features and materials are available since you purchased your last backpack. You’re going to spend some time looking for one that’s decent because you don’t want it to fall apart while you’re traveling and dump everything you’ve packed on a hiking trail. You might do a little research online and come to a decision relatively quickly. You might consider the choices available at your favorite retail outlet but not look at every backpack at every outlet before making a decision. Or you might rely on the advice of a person you know who’s knowledgeable about backpacks. In some way you shorten or limit your involvement and the decision-making process.

Products, such as chewing gum, which may be low-involvement for many consumers often use advertising such as commercials and sales promotions such as coupons to reach many consumers at once. Companies also try to sell products such as gum in as many locations as possible. Many products that are typically high-involvement such as automobiles may use more personal selling to answer consumers’ questions. Brand names can also be very important regardless of the consumer’s level of purchasing involvement. Consider a low- versus high-involvement decision—say, purchasing a tube of toothpaste versus a new car. You might routinely buy your favorite brand of toothpaste, not thinking much about the purchase (engage in routine response behavior), but not be willing to switch to another brand either. Having a brand you like saves you “search time” and eliminates the evaluation period because you know what you’re getting.

When it comes to the car, you might engage in extensive problem solving but, again, only be willing to consider a certain brand or brands. For example, in the 1970s, American-made cars had such a poor reputation for quality that buyers joked that a car that’s “not Jap [Japanese made] is crap.” The quality of American cars is very good today, but you get the picture. If it’s a high-involvement product you’re purchasing, a good brand name is probably going to be very important to you. That’s why the manufacturers of products that are typically high-involvement decisions can’t become complacent about the value of their brands.

1970s American Cars

(click to see video)

Today, Lexus is the automotive brand that experiences the most customer loyalty. For a humorous, tongue-in-cheek look at why the brand reputation of American carmakers suffered in the 1970s, check out this clip.

Stages in the Buying Process

Figure 3.9 “Stages in the Consumer’s Purchasing Process” outlines the buying stages consumers go through. At any given time, you’re probably in a buying stage for a product or service. You’re thinking about the different types of things you want or need to eventually buy, how you are going to find the best ones at the best price, and where and how will you buy them. Meanwhile, there are other products you have already purchased that you’re evaluating. Some might be better than others. Will you discard them, and if so, how? Then what will you buy? Where does that process start?

Figure 3.9 Stages in the Consumer’s Purchasing Process

Stage 1. Need Recognition

You plan to backpack around the country after you graduate and don’t have a particularly good backpack. You realize that you must get a new backpack. You may also be thinking about the job you’ve accepted after graduation and know that you must get a vehicle to commute. Recognizing a need may involve something as simple as running out of bread or milk or realizing that you must get a new backpack or a car after you graduate. Marketers try to show consumers how their products and services add value and help satisfy needs and wants. Do you think it’s a coincidence that Gatorade, Powerade, and other beverage makers locate their machines in gymnasiums so you see them after a long, tiring workout? Previews at movie theaters are another example. How many times have you have heard about a movie and had no interest in it—until you saw the preview? Afterward, you felt like you had to see it.

Stage 2. Search for Information

If what you already know about backpacks doesn’t provide you with enough information, you’ll probably continue to gather information from various sources. Frequently people ask friends, family, and neighbors about their experiences with products. Magazines such as Consumer Reports (considered an objective source of information on many consumer products) or Backpacker Magazine might also help you. Similar information sources are available for learning about different makes and models of cars.

Internet shopping sites such as Amazon.com have become a common source of information about products. Epinions.com is an example of consumer-generated review site. The site offers product ratings, buying tips, and price information. Amazon.com also offers product reviews written by consumers. People prefer “independent” sources such as this when they are looking for product information. However, they also often consult non-neutral sources of information, such advertisements, brochures, company Web sites, and salespeople.

Stage 3. Product Evaluation

Obviously, there are hundreds of different backpacks and cars available. It’s not possible for you to examine all of them. In fact, good salespeople and marketing professionals know that providing you with too many choices can be so overwhelming that you might not buy anything at all. Consequently, you may use choice heuristics or rules of thumb that provide mental shortcuts in the decision-making process. You may also develop evaluative criteria to help you narrow down your choices. Backpacks or cars that meet your initial criteria before the consideration will determine the set of brands you’ll consider for purchase.

Evaluative criteria are certain characteristics that are important to you such as the price of the backpack, the size, the number of compartments, and color. Some of these characteristics are more important than others. For example, the size of the backpack and the price might be more important to you than the color—unless, say, the color is hot pink and you hate pink. You must decide what criteria are most important and how well different alternatives meet the criteria.

Figure 3.10

Osprey backpacks are known for their durability. The company has a special design and quality control center, and Osprey’s salespeople annually take a “canyon testing” trip to see how well the company’s products perform.

melanie innis – break – CC BY-NC-ND 2.0.

Companies want to convince you that the evaluative criteria you are considering reflect the strengths of their products. For example, you might not have thought about the weight or durability of the backpack you want to buy. However, a backpack manufacturer such as Osprey might remind you through magazine ads, packaging information, and its Web site that you should pay attention to these features—features that happen to be key selling points of its backpacks. Automobile manufacturers may have similar models, so don’t be afraid to add criteria to help you evaluate cars in your consideration set.

Stage 4. Product Choice and Purchase

With low-involvement purchases, consumers may go from recognizing a need to purchasing the product. However, for backpacks and cars, you decide which one to purchase after you have evaluated different alternatives. In addition to which backpack or which car, you are probably also making other decisions at this stage, including where and how to purchase the backpack (or car) and on what terms. Maybe the backpack was cheaper at one store than another, but the salesperson there was rude. Or maybe you decide to order online because you’re too busy to go to the mall. Other decisions related to the purchase, particularly those related to big-ticket items, are made at this point. For example, if you’re buying a high-definition television, you might look for a store that will offer you credit or a warranty.

Stage 5. Postpurchase Use and Evaluation

At this point in the process you decide whether the backpack you purchased is everything it was cracked up to be. Hopefully it is. If it’s not, you’re likely to suffer what’s called postpurchase dissonance . You might call it buyer’s remorse . Typically, dissonance occurs when a product or service does not meet your expectations. Consumers are more likely to experience dissonance with products that are relatively expensive and that are purchased infrequently.

You want to feel good about your purchase, but you don’t. You begin to wonder whether you should have waited to get a better price, purchased something else, or gathered more information first. Consumers commonly feel this way, which is a problem for sellers. If you don’t feel good about what you’ve purchased from them, you might return the item and never purchase anything from them again. Or, worse yet, you might tell everyone you know how bad the product was.

Companies do various things to try to prevent buyer’s remorse. For smaller items, they might offer a money back guarantee or they might encourage their salespeople to tell you what a great purchase you made. How many times have you heard a salesperson say, “That outfit looks so great on you!” For larger items, companies might offer a warranty, along with instruction booklets, and a toll-free troubleshooting line to call or they might have a salesperson call you to see if you need help with product. Automobile companies may offer loaner cars when you bring your car in for service.

Companies may also try to set expectations in order to satisfy customers. Service companies such as restaurants do this frequently. Think about when the hostess tells you that your table will be ready in 30 minutes. If they seat you in 15 minutes, you are much happier than if they told you that your table would be ready in 15 minutes, but it took 30 minutes to seat you. Similarly, if a store tells you that your pants will be altered in a week and they are ready in three days, you’ll be much more satisfied than if they said your pants would be ready in three days, yet it took a week before they were ready.

Stage 6. Disposal of the Product

There was a time when neither manufacturers nor consumers thought much about how products got disposed of, so long as people bought them. But that’s changed. How products are being disposed of is becoming extremely important to consumers and society in general. Computers and batteries, which leech chemicals into landfills, are a huge problem. Consumers don’t want to degrade the environment if they don’t have to, and companies are becoming more aware of this fact.

Take for example Crystal Light, a water-based beverage that’s sold in grocery stores. You can buy it in a bottle. However, many people buy a concentrated form of it, put it in reusable pitchers or bottles, and add water. That way, they don’t have to buy and dispose of plastic bottle after plastic bottle, damaging the environment in the process. Windex has done something similar with its window cleaner. Instead of buying new bottles of it all the time, you can purchase a concentrate and add water. You have probably noticed that most grocery stores now sell cloth bags consumers can reuse instead of continually using and discarding of new plastic or paper bags.

Figure 3.11

The hike up to Mount Everest used to be pristine. Now it looks more like this. Who’s responsible? Are consumers or companies responsible, or both?

jqpubliq – Recycling Center Pile – CC BY-SA 2.0.

Other companies are less concerned about conservation than they are about planned obsolescence . Planned obsolescence is a deliberate effort by companies to make their products obsolete, or unusable, after a period of time. The goal is to improve a company’s sales by reducing the amount of time between the repeat purchases consumers make of products. When a software developer introduces a new version of product, it is usually designed to be incompatible with older versions of it. For example, not all the formatting features are the same in Microsoft Word 2007 and 2010. Sometimes documents do not translate properly when opened in the newer version. Consequently, you will be more inclined to upgrade to the new version so you can open all Word documents you receive.

Products that are disposable are another way in which firms have managed to reduce the amount of time between purchases. Disposable lighters are an example. Do you know anyone today that owns a nondisposable lighter? Believe it or not, prior to the 1960s, scarcely anyone could have imagined using a cheap disposable lighter. There are many more disposable products today than there were in years past—including everything from bottled water and individually wrapped snacks to single-use eye drops and cell phones.

Figure 3.12

Disposable lighters came into vogue in the United States in the 1960s. You probably don’t own a cool, nondisposable lighter like one of these, but you don’t have to bother refilling it with lighter fluid either.

Europeana staff photographer – A trench art lighter – public domain.

Key Takeaways

Consumer behavior looks at the many reasons why people buy things and later dispose of them. Consumers go through distinct buying phases when they purchase products: (1) realizing the need or wanting something, (2) searching for information about the item, (3) evaluating different products, (4) choosing a product and purchasing it, (5) using and evaluating the product after the purchase, and (6) disposing of the product. A consumer’s level of involvement is how interested he or she is in buying and consuming a product. Low-involvement products are usually inexpensive and pose a low risk to the buyer if he or she makes a mistake by purchasing them. High-involvement products carry a high risk to the buyer if they fail, are complex, or have high price tags. Limited-involvement products fall somewhere in between.

Review Questions

How do low-involvement decisions differ from high-involvement decisions in terms of relevance, price, frequency, and the risks their buyers face? Name some products in each category that you’ve recently purchased.
What stages do people go through in the buying process for high-involvement decisions? How do the stages vary for low-involvement decisions?
What is postpurchase dissonance and what can companies do to reduce it?

Share This Book

Module 4: Consumer Behavior

Low-involvement versus high-involvement buying decisions, learning objectives.

Distinguish between low-involvement and high-involvement buying decisions.
Understand what the stages of the buying process are and what happens in each stage.

Stages in the Buying Process

The figure below outlines the buying stages consumers go through. At any given time, you’re probably in a buying stage for a product or service. You’re thinking about the different types of things you want or need to eventually buy, how you are going to find the best ones at the best price, and where and how will you buy them. Meanwhile, there are other products you have already purchased that you’re evaluating. Some might be better than others. Will you discard them, and if so, how? Then what will you buy? Where does that process start?

Stage 1. Need Recognition

Stage 2. Search for Information

Stage 3. Product Evaluation

Stage 4. Product Choice and Purchase

Stage 5. Post-purchase Use and Evaluation

At this point in the process you decide whether the backpack you purchased is everything it was cracked up to be. Hopefully it is. If it’s not, you’re likely to suffer what’s called post-purchase dissonance . You might call it buyer’s remorse . Typically, dissonance occurs when a product or service does not meet your expectations. Consumers are more likely to experience dissonance with products that are relatively expensive and that are purchased infrequently.

Stage 6. Disposal of the Product

Key Takeaways

Review Questions

How do low-involvement decisions differ from high-involvement decisions in terms of relevance, price, frequency, and the risks their buyers face? Name some products in each category that you’ve recently purchased.
What stages do people go through in the buying process for high-involvement decisions? How do the stages vary for low-involvement decisions?
What is postpurchase dissonance and what can companies do to reduce it?
Provided by : Lumen Learning. Located at : http://lumenlearning.com . License : CC BY: Attribution
Marketing Principles. Authored by : Anonymous. Located at : http://2012books.lardbucket.org/books/marketing-principles-v2.0/ . License : CC BY-NC-SA: Attribution-NonCommercial-ShareAlike
1970s American Cars Damning Review. Authored by : Top Gear. Located at : http://youtu.be/pjzpx_jUUA0 . License : All Rights Reserved . License Terms : Standard YouTube License

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

6.3 Types of Consumer Decisions

As you read through the stages of the decision making process, did you think “Wait a minute. I do this sometimes but not all the time”? That is indicative of the different levels of involvement within the decision making process. In this section, we will examine this difference in more detail and how it may impact the marketing strategy.

Levels of Involvement in Decision Making

Consumers often engage in routine, or habitual, behavior when they make low-involvement decisions—that is, they make automatic purchase decisions based on limited information or information they have gathered in the past. For example, if you always order a Diet Coke at lunch, you’re engaging in routine response behavior. You may not even think about other drink options at lunch because your routine is to order a Diet Coke, and you simply do it. Similarly, if you run out of Diet Coke at home, you may buy more without any information search.

Some low-involvement purchases are made with no planning or previous thought. These buying decisions are called impulse buying. While you’re waiting to check out at the grocery store, perhaps you see a magazine with the latest celebrity or influencer on the cover and buy it on the spot simply because you want it. You might see a roll of tape at a check-out stand and remember you need one or you might see a bag of chips and realize you’re hungry or just want them.

By contrast, high-involvement decisions carry a higher risk to buyers if they fail, are complex, and/or have high price tags. A car, a house, and an insurance policy are examples. These items are not purchased often but are relevant and important to the buyer. Buyers don’t engage in routine response behavior when purchasing high-involvement products. Instead, consumers engage in what’s called extended problem solving where they spend a lot of time comparing different aspects such as the features of the products, prices, and warranties.

High-involvement decisions can cause buyers a great deal of cognitive (postpurchase) dissonance (anxiety) if they are unsure about their purchases or if they had a difficult time deciding between two alternatives. Companies that sell high-involvement products are aware that dissonance can be a problem. Frequently, they try to offer consumers a lot of information about their products, including why they are superior to competing brands and how they won’t let the consumer down. Salespeople may be utilized to answer questions and do a lot of customer “hand-holding.”

Allstate’s “You’re in Good Hands” advertisements are designed to convince consumers that the insurance company won’t let them down.

Mike Mozart – Allstate, – CC BY 2.0.

Products, such as chewing gum, which may be low-involvement for many consumers, often use advertising such as commercials and sales promotions such as coupons to reach many consumers at once. Companies also try to sell products such as gum in as many locations as possible. Many products that are typically high-involvement such as automobiles may use more personal selling to answer consumers’ questions. Brand names can also be very important regardless of the consumer’s level of purchasing involvement. Consider a low- versus high-involvement decision—say, purchasing a tube of toothpaste versus a new car. You might routinely buy your favorite brand of toothpaste, not thinking much about the purchase (engage in routine response behavior), but not be willing to switch to another brand either. Having a brand you like saves you “search time” and eliminates the evaluation period because you know what you’re getting.

You Try It!

Share This Book

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Individual Consumer Decision Making

29 Consumer Decision Making Process

An organization that wants to be successful must consider buyer behavior when developing the marketing mix. Buyer behavior is the actions people take with regard to buying and using products. Marketers must understand buyer behavior, such as how raising or lowering a price will affect the buyer’s perception of the product and therefore create a fluctuation in sales, or how a specific review on social media can create an entirely new direction for the marketing mix based on the comments (buyer behavior/input) of the target market.

The Consumer Decision Making Process

Once the process is started, a potential buyer can withdraw at any stage of making the actual purchase. The tendency for a person to go through all six stages is likely only in certain buying situations—a first time purchase of a product, for instance, or when buying high priced, long-lasting, infrequently purchased articles. This is referred to as complex decision making .

For many products, the purchasing behavior is a routine affair in which the aroused need is satisfied in a habitual manner by repurchasing the same brand. That is, past reinforcement in learning experiences leads directly to buying, and thus the second and third stages are bypassed. This is called simple decision making .

However, if something changes appreciably (price, product, availability, services), the buyer may re-enter the full decision process and consider alternative brands. Whether complex or simple, the first step is need identification (Assael, 1987).

A comparison between the "simple" and "complex" decision making process a consumer would experience depending on involvement and purchase.

When Inertia Takes Over

Need Recognition

Whether we act to resolve a particular problem depends upon two factors: (1) the magnitude of the discrepancy between what we have and what we need, and (2) the importance of the problem. A consumer may desire a new Cadillac and own a five-year-old Chevrolet. The discrepancy may be fairly large but relatively unimportant compared to the other problems they face. Conversely, an individual may own a car that is two years old and running very well. Yet, for various reasons, they may consider it extremely important to purchase a car this year. People must resolve these types of conflicts before they can proceed. Otherwise, the buying process for a given product stops at this point, probably in frustration.

Once the problem is recognized it must be defined in such a way that the consumer can actually initiate the action that will bring about a relevant problem solution. Note that, in many cases, problem recognition and problem definition occur simultaneously, such as a consumer running out of toothpaste. Consider the more complicated problem involved with status and image–how we want others to see us. For example, you may know that you are not satisfied with your appearance, but you may not be able to define it any more precisely than that. Consumers will not know where to begin solving their problem until the problem is adequately defined.

Marketers can become involved in the need recognition stage in three ways. First they need to know what problems consumers are facing in order to develop a marketing mix to help solve these problems. This requires that they measure problem recognition. Second, on occasion, marketers want to activate problem recognition. Public service announcements espousing the dangers of cigarette smoking is an example. Weekend and night shop hours are a response of retailers to the consumer problem of limited weekday shopping opportunities. This problem has become particularly important to families with two working adults. Finally, marketers can also shape the definition of the need or problem. If a consumer needs a new coat, do they define the problem as a need for inexpensive covering, a way to stay warm on the coldest days, a garment that will last several years, warm cover that will not attract odd looks from their peers, or an article of clothing that will express their personal sense of style? A salesperson or an ad may shape their answers

Information Search

After a need is recognized, the prospective consumer may seek information to help identify and evaluate alternative products, services, and outlets that will meet that need. Such information can come from family, friends, personal observation, or other sources, such as Consumer Reports, salespeople, or mass media. The promotional component of the marketers offering is aimed at providing information to assist the consumer in their problem solving process. In some cases, the consumer already has the needed information based on past purchasing and consumption experience. Bad experiences and lack of satisfaction can destroy repeat purchases. The consumer with a need for tires may look for information in the local newspaper or ask friends for recommendation. If they have bought tires before and was satisfied, they may go to the same dealer and buy the same brand.

Information search can also identify new needs. As a tire shopper looks for information, they may decide that the tires are not the real problem, that the need is for a new car. At this point, the perceived need may change triggering a new informational search. Information search involves mental as well as the physical activities that consumers must perform in order to make decisions and accomplish desired goals in the marketplace. It takes time, energy, money, and can often involve foregoing more desirable activities. The benefits of information search, however, can outweigh the costs. For example, engaging in a thorough information search may save money, improve quality of selection, or reduce risks. The Internet is a valuable information source.

Evaluation of Alternatives

After information is secured and processed, alternative products, services, and outlets are identified as viable options. The consumer evaluates these alternatives , and, if financially and psychologically able, makes a choice. The criteria used in evaluation varies from consumer to consumer just as the needs and information sources vary. One consumer may consider price most important while another puts more weight (importance) upon quality or convenience.

Using the ‘Rule of Thumb’

Consumers don’t have the time or desire to ponder endlessly about every purchase! Fortunately for us, heuristics , also described as shortcuts or mental “rules of thumb”, help us make decisions quickly and painlessly. Heuristics are especially important to draw on when we are faced with choosing among products in a category where we don’t see huge differences or if the outcome isn’t ‘do or die’.

Heuristics are helpful sets of rules that simplify the decision-making process by making it quick and easy for consumers.

Common Heuristics in Consumer Decision Making

Save the most money: Many people follow a rule like, “I’ll buy the lowest-priced choice so that I spend the least money right now.” Using this heuristic means you don’t need to look beyond the price tag to make a decision. Wal-Mart built a retailing empire by pleasing consumers who follow this rule.
You get what you pay for: Some consumers might use the opposite heuristic of saving the most money and instead follow a rule such as: “I’ll buy the more expensive product because higher price means better quality.” These consumers are influenced by advertisements alluding to exclusivity, quality, and uncompromising performance.
Stich to the tried and true: Brand loyalty also simplifies the decision-making process because we buy the brand that we’ve always bought before. therefore, we don’t need to spend more time and effort on the decision. Advertising plays a critical role in creating brand loyalty. In a study of the market leaders in thirty product categories, 27 of the brands that were #1 in 1930 were still at the top over 50 years later (Stevesnson, 1988)! A well known brand name is a powerful heuristic .
National pride: Consumers who select brands because they represent their own culture and country of origin are making decision based on ethnocentrism . Ethnocentric consumers are said to perceive their own culture or country’s goods as being superior to others’. Ethnocentrism can behave as both a stereotype and a type of heuristic for consumers who are quick to generalize and judge brands based on their country of origin.
Visual cues: Consumers may also rely on visual cues represented in product and packaging design. Visual cues may include the colour of the brand or product or deeper beliefs that they have developed about the brand. For example, if brands claim to support sustainability and climate activism, consumers want to believe these to be true. Visual cues such as green design and neutral-coloured packaging that appears to be made of recycled materials play into consumers’ heuristics .

The search for alternatives and the methods used in the search are influenced by such factors as: (a) time and money costs; (b) how much information the consumer already has; (c) the amount of the perceived risk if a wrong selection is made; and (d) the consumer’s predisposition toward particular choices as influenced by the attitude of the individual toward choice behaviour. That is, there are individuals who find the selection process to be difficult and disturbing. For these people there is a tendency to keep the number of alternatives to a minimum, even if they have not gone through an extensive information search to find that their alternatives appear to be the very best. On the other hand, there are individuals who feel it necessary to collect a long list of alternatives. This tendency can appreciably slow down the decision-making function.

Consumer Evaluations Made Easier

The evaluation of alternatives often involves consumers drawing on their evoke, inept, and insert sets to help them in the decision making process.

The brands and products that consumers compare—their evoked set – represent the alternatives being considered by consumers during the problem-solving process. Sometimes known as a “consideration” set, the evoked set tends to be small relative to the total number of options available. When a consumer commits significant time to the comparative process and reviews price, warranties, terms and condition of sale and other features it is said that they are involved in extended problem solving. Unlike routine problem solving, extended or extensive problem solving comprises external research and the evaluation of alternatives. Whereas, routine problem solving is low-involvement, inexpensive, and has limited risk if purchased, extended problem solving justifies the additional effort with a high-priced or scarce product, service, or benefit (e.g., the purchase of a car). Likewise, consumers use extensive problem solving for infrequently purchased, expensive, high-risk, or new goods or services.

As opposed to the evoked set, a consumer’s inept set represent those brands that they would not given any consideration too. For a consumer who is shopping around for an electric vehicle, for example, they would not even remotely consider gas-guzzling vehicles like large SUVs.

The inert set represents those brands or products a consumer is aware of, but is indifferent to and doesn’t consider them either desirable or relevant enough to be among the evoke set. Marketers have an opportunity here to position their brands appropriately so consumers move these items from their insert to evoke set when evaluation alternatives.

The selection of an alternative, in many cases, will require additional evaluation. For example, a consumer may select a favorite brand and go to a convenient outlet to make a purchase. Upon arrival at the dealer, the consumer finds that the desired brand is out-of-stock. At this point, additional evaluation is needed to decide whether to wait until the product comes in, accept a substitute, or go to another outlet. The selection and evaluation phases of consumer problem solving are closely related and often run sequentially, with outlet selection influencing product evaluation, or product selection influencing outlet evaluation.

While many consumers would agree that choice is a good thing, there is such a thing as “too much choice” that inhibits the consumer decision making process. Consumer hyperchoice is a term used to describe purchasing situations that involve an excess of choice thus making selection for difficult for consumers. Dr. Sheena Iyengar studies consumer choice and collects data that supports the concept of consumer hyperchoice. In one of her studies, she put out jars of jam in a grocery store for shoppers to sample, with the intention to influence purchases. Dr. Iyengar discovered that when a fewer number of jam samples were provided to shoppers, more purchases were made. But when a large number of jam samples were set out, fewer purchases were made (Green, 2010). As it turns out, “more is less” when it comes to the selection process.

The Purchase Decision

After much searching and evaluating, or perhaps very little, consumers at some point have to decide whether they are going to buy.

Anything marketers can do to simplify purchasing will be attractive to buyers. This may include minimal clicks to online checkout; short wait times in line; and simplified payment options. When it comes to advertising marketers could also suggest the best size for a particular use, or the right wine to drink with a particular food. Sometimes several decision situations can be combined and marketed as one package. For example, travel agents often package travel tours with flight and hotel reservations.

To do a better marketing job at this stage of the buying process, a seller needs to know answers to many questions about consumers’ shopping behaviour. For instance, how much effort is the consumer willing to spend in shopping for the product? What factors influence when the consumer will actually purchase? Are there any conditions that would prohibit or delay purchase? Providing basic product, price, and location information through labels, advertising, personal selling, and public relations is an obvious starting point. Product sampling, coupons, and rebates may also provide an extra incentive to buy.

Actually determining how a consumer goes through the decision-making process is a difficult research task.

Post-Purchase Behaviour

All the behaviour determinants and the steps of the buying process up to this point are operative before or during the time a purchase is made. However, a consumer’s feelings and evaluations after the sale are also significant to a marketer, because they can influence repeat sales and also influence what the customer tells others about the product or brand.

Keeping the customer happy is what marketing is all about. Nevertheless, consumers typically experience some post-purchase anxiety after all but the most routine and inexpensive purchases. This anxiety reflects a phenomenon called cognitive dissonance . According to this theory, people strive for consistency among their cognitions (knowledge, attitudes, beliefs, values). When there are inconsistencies, dissonance exists, which people will try to eliminate. In some cases, the consumer makes the decision to buy a particular brand already aware of dissonant elements. In other instances, dissonance is aroused by disturbing information that is received after the purchase. The marketer may take specific steps to reduce post-purchase dissonance. Advertising that stresses the many positive attributes or confirms the popularity of the product can be helpful. Providing personal reinforcement has proven effective with big-ticket items such as automobiles and major appliances. Salespeople in these areas may send cards or may even make personal calls in order to reassure customers about their purchase.

Media Attributions

The graphic of the “Consumer Decision Making Process” by Niosi, A. (2021) is licensed under CC BY-NC-SA and is adapted from Introduction to Business by Rice University.

Text Attributions

The sections under the “Consumer Decision Making Process,” “Need Recognition” (edited), “Information Search,” “Evaluation of Alternatives”; the first paragraph under the section “Selection”; the section under “Purchase Decision”; and, the section under “Post-Purchase Behaviour” are adapted from Introducing Marketing [PDF] by John Burnett which is licensed under CC BY 3.0 .
The opening paragraph and the image of the Consumer Decision Making Process is adapted from Introduction to Business by Rice University which is licensed under a Creative Commons Attribution 4.0 International License .
The section under “Using the ‘Rule of Thumb'” is adapted (and edited) from Launch! Advertising and Promotion in Real Time [PDF] by Saylor Academy which is licensed under CC BY-NC-SA 3.0 .

Assael, H. (1987). Consumer Behavior and Marketing Action (3rd ed.), 84. Boston: Kent Publishing.

Green, P. (2010, March 17). An Expert on Choice Chooses. The New York Times. https://www.nytimes.com/2010/03/18/garden/18choice.html.

Consumer purchases made when a (new) need is identified and a consumer engages in a more rigorous evaluation, research, and alternative assessment process before satisfying the unmet need.

Consumer purchases made when a need is identified and a habitual ("routine") purchase is made to satisfy that need.

Purchasing decisions made out of habit.

The first stage of the Consumer Decision Making Process, need recognition takes place when a consumer identifies an unmet need.

The second stage of the Consumer Decision Making Process, information search takes place when a consumer seeks relative information that will help them identify and evaluate alternatives before deciding on the final purchase decision.

The third stage of the Consumer Decision Making Process, the evaluation of alternatives takes place when a consumer establishes criteria to evaluate the most viable purchasing option.

Also known as "mental shortcuts" or "rules of thumb", heuristics help consumers by simplifying the decision-making process.

A small set of "go-to" brands that consumers will consider as they evaluate the alternatives available to them before making a purchasing decision.

The brands a consumer would not pay any attention to during the evaluation of alternatives process.

The brands a consumer is aware of but indifferent to, when evaluating alternatives in the consumer decision making process. The consumer may deem these brands irrelevant and will therefore exclude them from any extensive evaluation or consideration.

A term that describes a purchasing situation in which a consumer is faced with an excess of choice that makes decision making difficult or nearly impossible.

A type of cognitive inconsistency, this term describes the discomfort consumers may feel when their beliefs, values, attitudes, or perceptions are inconsistent or contradictory to their original belief or understanding. Consumers with cognitive dissonance related to a purchasing decision will often seek to resolve this internal turmoil they are experiencing by returning the product or finding a way to justify it and minimizing their sense of buyer's remorse.

Share This Book

a consumer extended problem solving process has this key characteristic

Definition and examples of the consumer decision-making process

Lucid Content

Reading time: about 6 min

What is the consumer decision making process

The consumer decision-making process involves five basic steps. This is the process by which consumers evaluate making a purchasing decision. The 5 steps are problem recognition, information search, alternatives evaluation, purchase decision and post-purchase evaluation.

5 steps of the consumer decision making process

Problem recognition : Recognizes the need for a service or product
Information search : Gathers information
Alternatives evaluation : Weighs choices against comparable alternatives
Purchase decision : Makes actual purchase
Post-purchase evaluation : Reflects on the purchase they made

The consumer decision-making process can seem mysterious, but all consumers go through basic steps when making a purchase to determine what products and services will best fit their needs.

Think about your own thought process when buying something—especially when it’s something big, like a car. You consider what you need, research, and compare your options before making the decision to buy. Afterward, you often wonder if you made the right call.

If you work in sales or marketing, make more of an impact by putting yourself in the customer’s shoes and reviewing the steps in the consumer decision-making process.

Steps in the consumer decision process

Generally speaking, the consumer decision-making process involves five basic steps.

1. Problem recognition

The first step of the consumer decision-making process is recognizing the need for a service or product. Need recognition, whether prompted internally or externally, results in the same response: a want. Once consumers recognize a want, they need to gather information to understand how they can fulfill that want, which leads to step two.

But how can you influence consumers at this stage? Since internal stimulus comes from within and includes basic impulses like hunger or a change in lifestyle, focus your sales and marketing efforts on external stimulus.

Develop a comprehensive brand campaign to build brand awareness and recognition––you want consumers to know you and trust you. Most importantly, you want them to feel like they have a problem only you can solve.

Example: Winter is coming. This particular customer has several light jackets, but she’ll need a heavy-duty winter coat if she’s going to survive the snow and lower temperatures.

2. Information search

When researching their options, consumers again rely on internal and external factors, as well as past interactions with a product or brand, both positive and negative. In the information stage, they may browse through options at a physical location or consult online resources, such as Google or customer reviews.

Your job as a brand is to give the potential customer access to the information they want, with the hopes that they decide to purchase your product or service. Create a funnel and plan out the types of content that people will need. Present yourself as a trustworthy source of knowledge and information.

Another important strategy is word of mouth—since consumers trust each other more than they do businesses, make sure to include consumer-generated content, like customer reviews or video testimonials, on your website.

Example: The customer searches “women’s winter coats” on Google to see what options are out there. When she sees someone with a cute coat, she asks them where they bought it and what they think of that brand.

3. Alternatives evaluation

At this point in the consumer decision-making process, prospective buyers have developed criteria for what they want in a product. Now they weigh their prospective choices against comparable alternatives.

Example: The customer compares a few brands that she likes. She knows that she wants a brightly colored coat that will complement the rest of her wardrobe, and though she would rather spend less money, she also wants to find a coat made from sustainable materials.

4. Purchase decision

This is the moment the consumer has been waiting for: the purchase. Once they have gathered all the facts, including feedback from previous customers, consumers should arrive at a logical conclusion on the product or service to purchase.

If you’ve done your job correctly, the consumer will recognize that your product is the best option and decide to purchase it.

Example: The customer finds a pink winter coat that’s on sale for 20% off. After confirming that the brand uses sustainable materials and asking friends for their feedback, she orders the coat online.

5. Post-purchase evaluation

This part of the consumer decision-making process involves reflection from both the consumer and the seller. As a seller, you should try to gauge the following:

Did the purchase meet the need the consumer identified?
Is the customer happy with the purchase?
How can you continue to engage with this customer?

Remember, it’s your job to ensure your customer continues to have a positive experience with your product. Post-purchase engagement could include follow-up emails, discount coupons, and newsletters to entice the customer to make an additional purchase. You want to gain life-long customers, and in an age where anyone can leave an online review, it’s more important than ever to keep customers happy.

Tools to better understand your customer

Putting yourself in the customer’s shoes can help you steer consumers towards your product. Here are some tools to help you analyze their decision-making process and refine your brand marketing and sales tactics.

Customer journey map

A customer journey map visualizes a hypothetical customer’s actions. Use it to empathize with your customers as they go through a specific process or try to complete a purchase. Map out the actions the customer is likely to take.

Learn how to make a customer journey map to understand the decision-making process for your product/service.

Empathy map

Empathy maps help teams understand the customer’s mindset when dealing with a product or service. They can be used for personas or specific customer types. Empathy mapping is often most helpful at the beginning of a new project. Collaborate as a team to quickly get inside the heads of your customers during every step of product development, testing, and release.

Learn how empathy maps work so you can understand your customers better and make customer-oriented decisions .

User personas

Based on user research or past user interactions, user persona cards construct fictional or composite personas that break down and organize your data into distinctive types of users. Build a more human picture of your users and understand your user base better by creating user personas for the various types of users for your product or service.

Understanding the consumer decision-making process is key if you want to attract more customers and get them to make that crucial purchase. Use this process and the tools above to tune in to consumers and genuinely understand how to reach them.

Visualize your own customer journey map.

About Lucidchart

Lucidchart, a cloud-based intelligent diagramming application, is a core component of Lucid Software's Visual Collaboration Suite. This intuitive, cloud-based solution empowers teams to collaborate in real-time to build flowcharts, mockups, UML diagrams, customer journey maps, and more. Lucidchart propels teams forward to build the future faster. Lucid is proud to serve top businesses around the world, including customers such as Google, GE, and NBC Universal, and 99% of the Fortune 500. Lucid partners with industry leaders, including Google, Atlassian, and Microsoft. Since its founding, Lucid has received numerous awards for its products, business, and workplace culture. For more information, visit lucidchart.com.

How to make a decision tree in excel.

Use this guide to learn how to make a decision tree in Microsoft Excel—either directly in Excel using Shapes or using a simple Lucidchart integration.

9 templates for marketers

Whether you specialize in a specific marketing role or you wear many different hats on a small team, we’ve rounded up nine marketing templates to make your job easier.

Bring your bright ideas to life.

or continue with

By registering, you agree to our Terms of Service and you acknowledge that you have read and understand our Privacy Policy .

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

3.2 Low-Involvement Versus High-Involvement Buying Decisions and the Consumer’s Decision-Making Process

Learning objectives.

Distinguish between low-involvement and high-involvement buying decisions.
Understand what the stages of the buying process are and what happens in each stage.

Allstate’s “You’re in Good Hands” advertisements are designed to convince consumers that the insurance company won’t let them down.

Mike Mozart – Allstate, – CC BY 2.0.

1970s American Cars

<a target=”_blank” href=”http://www.youtube.com/watch?v=pjzpx_jUUA0″(Link to American Cars video)

Stages in the Buying Process

Figure 3.9 Stages in the Consumer’s Purchasing Process

Stage 1. Need Recognition

Stage 2. Search for Information

Stage 3. Product Evaluation

Figure 3.10

melanie innis – break – CC BY-NC-ND 2.0.

Stage 4. Product Choice and Purchase

Stage 5. Postpurchase Use and Evaluation

Stage 6. Disposal of the Product

Figure 3.11

The hike up to Mount Everest used to be pristine. Now it looks more like this. Who’s responsible? Are consumers or companies responsible, or both?

jqpubliq – Recycling Center Pile – CC BY-SA 2.0.

Figure 3.12

Europeana staff photographer – A trench art lighter – public domain.

Key Takeaways

Review Questions

How do low-involvement decisions differ from high-involvement decisions in terms of relevance, price, frequency, and the risks their buyers face? Name some products in each category that you’ve recently purchased.
What stages do people go through in the buying process for high-involvement decisions? How do the stages vary for low-involvement decisions?
What is postpurchase dissonance and what can companies do to reduce it?

Share This Book

BUS602: Marketing Management

The Consumer's Decision Making Process

Read these sections on the consumer purchase decision process. Consider the degree of involvement in a purchase, and how this would apply to some, but not all purchasing decisions.

Low-Involvement Versus High-Involvement Buying Decisions and the Consumer's Decision-Making Process

Learning objectives.

Distinguish between low-involvement and high-involvement buying decisions.
Understand what the stages of the buying process are and what happens in each stage.

As you have seen, many factors influence a consumer's behavior. Depending on a consumer's experience and knowledge, some consumers may be able to make quick purchase decisions and other consumers may need to get information and be more involved in the decision process before making a purchase. The level of involvement reflects how personally important or interested you are in consuming a product and how much information you need to make a decision. The level of involvement in buying decisions may be considered a continuum from decisions that are fairly routine (consumers are not very involved) to decisions that require extensive thought and a high level of involvement. Whether a decision is low, high, or limited, involvement varies by consumer, not by product, although some products such as purchasing a house typically require a high-involvement for all consumers. Consumers with no experience purchasing a product may have more involvement than someone who is replacing a product. You have probably thought about many products you want or need but never did much more than that. At other times, you've probably looked at dozens of products, compared them, and then decided not to purchase any one of them. When you run out of products such as milk or bread that you buy on a regular basis, you may buy the product as soon as you recognize the need because you do not need to search for information or evaluate alternatives. As Nike would put it, you "just do it". Low-involvement decisions are, however, typically products that are relatively inexpensive and pose a low risk to the buyer if she makes a mistake by purchasing them. Consumers often engage in routine response behavior when they make low-involvement decisions - that is, they make automatic purchase decisions based on limited information or information they have gathered in the past. For example, if you always order a Diet Coke at lunch, you're engaging in routine response behavior. You may not even think about other drink options at lunch because your routine is to order a Diet Coke, and you simply do it. Similarly, if you run out of Diet Coke at home, you may buy more without any information search. Some low-involvement purchases are made with no planning or previous thought. These buying decisions are called impulse buying . While you're waiting to check out at the grocery store, perhaps you see a magazine with Angelina Jolie and Brad Pitt on the cover and buy it on the spot simply because you want it. You might see a roll of tape at a check-out stand and remember you need one or you might see a bag of chips and realize you're hungry or just want them. These are items that are typically low-involvement decisions. Low-involvement decisions aren't necessarily products purchased on impulse, although they can be. By contrast, high-involvement decisions carry a higher risk to buyers if they fail, are complex, and/or have high price tags. A car, a house, and an insurance policy are examples. These items are not purchased often but are relevant and important to the buyer. Buyers don't engage in routine response behavior when purchasing high-involvement products. Instead, consumers engage in what's called extended problem solving , where they spend a lot of time comparing different aspects such as the features of the products, prices, and warranties. High-involvement decisions can cause buyers a great deal of postpurchase dissonance (anxiety) if they are unsure about their purchases or if they had a difficult time deciding between two alternatives. Companies that sell high-involvement products are aware that postpurchase dissonance can be a problem. Frequently, they try to offer consumers a lot of information about their products, including why they are superior to competing brands and how they won't let the consumer down. Salespeople may be utilized to answer questions and do a lot of customer "hand-holding". Figure 3.8

Allstate's "You're in Good Hands" advertisements are designed to convince consumers that the insurance company won't let them down. Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip. While you are familiar with backpacks, you know that new features and materials are available since you purchased your last backpack. You're going to spend some time looking for one that's decent because you don't want it to fall apart while you're traveling and dump everything you've packed on a hiking trail. You might do a little research online and come to a decision relatively quickly. You might consider the choices available at your favorite retail outlet but not look at every backpack at every outlet before making a decision. Or you might rely on the advice of a person you know who's knowledgeable about backpacks. In some way you shorten or limit your involvement and the decision-making process. Products, such as chewing gum, which may be low-involvement for many consumers often use advertising such as commercials and sales promotions such as coupons to reach many consumers at once. Companies also try to sell products such as gum in as many locations as possible. Many products that are typically high-involvement such as automobiles may use more personal selling to answer consumers' questions. Brand names can also be very important regardless of the consumer's level of purchasing involvement. Consider a low- versus high-involvement decision - say, purchasing a tube of toothpaste versus a new car. You might routinely buy your favorite brand of toothpaste, not thinking much about the purchase (engage in routine response behavior), but not be willing to switch to another brand either. Having a brand you like saves you "search time" and eliminates the evaluation period because you know what you're getting. When it comes to the car, you might engage in extensive problem solving but, again, only be willing to consider a certain brand or brands. For example, in the 1970s, American-made cars had such a poor reputation for quality that buyers joked that a car that's "not Jap [Japanese made] is crap". The quality of American cars is very good today, but you get the picture. If it's a high-involvement product you're purchasing, a good brand name is probably going to be very important to you. That's why the manufacturers of products that are typically high-involvement decisions can't become complacent about the value of their brands.

1970s American Cars

Stages in the Buying Process

Figure 3.9 "Stages in the Consumer's Purchasing Process" outlines the buying stages consumers go through. At any given time, you're probably in a buying stage for a product or service. You're thinking about the different types of things you want or need to eventually buy, how you are going to find the best ones at the best price, and where and how you will buy them. Meanwhile, there are other products you have already purchased that you're evaluating. Some might be better than others. Will you discard them, and if so, how? Then what will you buy? Where does that process start? Figure 3.9 Stages in the Consumer's Purchasing Process

Stage 1. Need Recognition

You plan to backpack around the country after you graduate and don't have a particularly good backpack. You realize that you must get a new backpack. You may also be thinking about the job you've accepted after graduation and know that you must get a vehicle to commute. Recognizing a need may involve something as simple as running out of bread or milk or realizing that you must get a new backpack or a car after you graduate. Marketers try to show consumers how their products and services add value and help satisfy needs and wants. Do you think it's a coincidence that Gatorade, Powerade, and other beverage makers locate their machines in gymnasiums so you see them after a long, tiring workout? Previews at movie theaters are another example. How many times have you heard about a movie and had no interest in it - until you saw the preview? Afterward, you felt like you had to see it.

Stage 2. Search for Information

For products such as milk and bread, you may simply recognize the need, go to the store, and buy more. However, if you are purchasing a car for the first time or need a particular type of backpack, you may need to get information on different alternatives. Maybe you have owned several backpacks and know what you like and don't like about them. Or there might be a particular brand that you've purchased in the past that you liked and want to purchase in the future. This is a great position for the company that owns the brand to be in - something firms strive for. Why? Because it often means you will limit your search and simply buy their brand again. If what you already know about backpacks doesn't provide you with enough information, you'll probably continue to gather information from various sources. Frequently people ask friends, family, and neighbors about their experiences with products. Magazines such as Consumer Reports (considered an objective source of information on many consumer products) or Backpacker Magazine might also help you. Similar information sources are available for learning about different makes and models of cars. Internet shopping sites such as Amazon.com have become a common source of information about products. Epinions.com is an example of a consumer-generated review site. The site offers product ratings, buying tips, and price information. Amazon.com also offers product reviews written by consumers. People prefer "independent" sources such as this when they are looking for product information. However, they also often consult non-neutral sources of information, such advertisements, brochures, company websites, and salespeople.

Stage 3. Product Evaluation

Obviously, there are hundreds of different backpacks and cars available. It's not possible for you to examine all of them. In fact, good salespeople and marketing professionals know that providing you with too many choices can be so overwhelming that you might not buy anything at all. Consequently, you may use choice heuristics or rules of thumb that provide mental shortcuts in the decision-making process. You may also develop evaluative criteria to help you narrow down your choices. Backpacks or cars that meet your initial criteria before the consideration will determine the set of brands you'll consider for purchase. Evaluative criteria are certain characteristics that are important to you such as the price of the backpack, the size, the number of compartments, and color. Some of these characteristics are more important than others. For example, the size of the backpack and the price might be more important to you than the color - unless, say, the color is hot pink and you hate pink. You must decide what criteria are most important and how well different alternatives meet the criteria. Figure 3.10

Osprey backpacks are known for their durability. The company has a special design and quality control center, and Osprey's salespeople annually take a "canyon testing" trip to see how well the company's products perform. Companies want to convince you that the evaluative criteria you are considering reflect the strengths of their products. For example, you might not have thought about the weight or durability of the backpack you want to buy. However, a backpack manufacturer such as Osprey might remind you through magazine ads, packaging information, and its Web site that you should pay attention to these features - features that happen to be key selling points of its backpacks. Automobile manufacturers may have similar models, so don't be afraid to add criteria to help you evaluate cars in your consideration set.

Stage 4. Product Choice and Purchase

With low-involvement purchases, consumers may go from recognizing a need to purchasing the product. However, for backpacks and cars, you decide which one to purchase after you have evaluated different alternatives. In addition to which backpack or which car, you are probably also making other decisions at this stage, including where and how to purchase the backpack (or car) and on what terms. Maybe the backpack was cheaper at one store than another, but the salesperson there was rude. Or maybe you decide to order online because you're too busy to go to the mall. Other decisions related to the purchase, particularly those related to big-ticket items, are made at this point. For example, if you're buying a high-definition television, you might look for a store that will offer you credit or a warranty.

Stage 5. Postpurchase Use and Evaluation

At this point in the process you decide whether the backpack you purchased is everything it was cracked up to be. Hopefully it is. If it's not, you're likely to suffer what's called postpurchase dissonance . You might call it buyer's remorse. Typically, dissonance occurs when a product or service does not meet your expectations. Consumers are more likely to experience dissonance with products that are relatively expensive and that are purchased infrequently. You want to feel good about your purchase, but you don't. You begin to wonder whether you should have waited to get a better price, purchased something else, or gathered more information first. Consumers commonly feel this way, which is a problem for sellers. If you don't feel good about what you've purchased from them, you might return the item and never purchase anything from them again. Or, worse yet, you might tell everyone you know how bad the product was. Companies do various things to try to prevent buyer's remorse. For smaller items, they might offer a money back guarantee or they might encourage their salespeople to tell you what a great purchase you made. How many times have you heard a salesperson say, "That outfit looks so great on you!" For larger items, companies might offer a warranty, along with instruction booklets, and a toll-free troubleshooting line to call or they might have a salesperson call you to see if you need help with product. Automobile companies may offer loaner cars when you bring your car in for service. Companies may also try to set expectations in order to satisfy customers. Service companies such as restaurants do this frequently. Think about when the hostess tells you that your table will be ready in 30 minutes. If they seat you in 15 minutes, you are much happier than if they told you that your table would be ready in 15 minutes, but it took 30 minutes to seat you. Similarly, if a store tells you that your pants will be altered in a week and they are ready in three days, you'll be much more satisfied than if they said your pants would be ready in three days, yet it took a week before they were ready.

Stage 6. Disposal of the Product

There was a time when neither manufacturers nor consumers thought much about how products got disposed of, so long as people bought them. But that's changed. How products are being disposed of is becoming extremely important to consumers and society in general. Computers and batteries, which leech chemicals into landfills, are a huge problem. Consumers don't want to degrade the environment if they don't have to, and companies are becoming more aware of this fact. Take for example Crystal Light, a water-based beverage that's sold in grocery stores. You can buy it in a bottle. However, many people buy a concentrated form of it, put it in reusable pitchers or bottles, and add water. That way, they don't have to buy and dispose of plastic bottle after plastic bottle, damaging the environment in the process. Windex has done something similar with its window cleaner. Instead of buying new bottles of it all the time, you can purchase a concentrate and add water. You have probably noticed that most grocery stores now sell cloth bags consumers can reuse instead of continually using and discarding of new plastic or paper bags. Figure 3.11

The hike up to Mount Everest used to be pristine. Now it looks more like this. Who's responsible? Are consumers or companies responsible, or both? Other companies are less concerned about conservation than they are about planned obsolescence. Planned obsolescence is a deliberate effort by companies to make their products obsolete, or unusable, after a period of time. The goal is to improve a company's sales by reducing the amount of time between the repeat purchases consumers make of products. When a software developer introduces a new version of product, it is usually designed to be incompatible with older versions of it. For example, not all the formatting features are the same in Microsoft Word 2007 and 2010. Sometimes documents do not translate properly when opened in the newer version. Consequently, you will be more inclined to upgrade to the new version so you can open all Word documents you receive. Products that are disposable are another way in which firms have managed to reduce the amount of time between purchases. Disposable lighters are an example. Do you know anyone today that owns a nondisposable lighter? Believe it or not, prior to the 1960s, scarcely anyone could have imagined using a cheap disposable lighter. There are many more disposable products today than there were in years past - including everything from bottled water and individually wrapped snacks to single-use eye drops and cell phones. Figure 3.12

Disposable lighters came into vogue in the United States in the 1960s. You probably don't own a cool, nondisposable lighter like one of these, but you don't have to bother refilling it with lighter fluid either.

Key Takeaways

Consumer behavior looks at the many reasons why people buy things and later dispose of them. Consumers go through distinct buying phases when they purchase products: (1) realizing the need or wanting something, (2) searching for information about the item, (3) evaluating different products, (4) choosing a product and purchasing it, (5) using and evaluating the product after the purchase, and (6) disposing of the product. A consumer's level of involvement is how interested he or she is in buying and consuming a product. Low-involvement products are usually inexpensive and pose a low risk to the buyer if he or she makes a mistake by purchasing them. High-involvement products carry a high risk to the buyer if they fail, are complex, or have high price tags. Limited-involvement products fall somewhere in between.

Review Questions

How do low-involvement decisions differ from high-involvement decisions in terms of relevance, price, frequency, and the risks their buyers face? Name some products in each category that you've recently purchased.
What stages do people go through in the buying process for high-involvement decisions? How do the stages vary for low-involvement decisions?
What is postpurchase dissonance and what can companies do to reduce it?

IMAGES

PPT
Problem Solving Presentation Ppt
PPT
Consumer Problem Solving Process Ppt Powerpoint Presentation Summary
Extended Problem Solving
Extended Problem Solving

VIDEO

Extended Problem Solving Workshop: Group 4 (Finance Canada)
What is Consumer Behavior?
Extended Problem Solving Workshop: Group 2 (Bank of Canada)
Extended Problem Solving Workshop: Group 1 (OECD)
Solving Consumer Problems: A Key to Business Growth
Tricks to Solve Matrix Polynomial Questions

COMMENTS

Identifying and Understanding Customer Behavior Flashcards
A consumer extended problem-solving process has this key characteristic: The consumer will take more time to research their options. Retailers segment population groups to serve in order to:
Chapter 6 Flashcards
5) decider: the member of a business buying center that has the authority to make the final purchase decision. 6) buyer: the member of a business-buying center who has the formal authority and responsibility for executing the purchase. Explain the steps in the business buying decision process. 1) problem recognition. 2) information search.
Solved A consumer extended problem-solving process has this
Question: A consumer extended problem-solving process has this key characteristic:Group of answer choicesThe consumer will take more time to research their options.The consumer will oftentimes not come to a buying decision.The consumer will move rapidly as the problem needs to be resolved quickly. A consumer extended problem - solving process ...
4.21: Increasing Sales with Extended Problem Solving
Consumers with an extended problem solving mindset put a great deal of effort into their purchase decision, gathering information through research and taking care to evaluate all options, before arriving at a decision. Because of the time and energy committed to the search, this diligence is more likely dedicated to the selection and purchase ...
3.2 Low-Involvement Versus High-Involvement Buying Decisions and the
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
Solved A consumer extended problem-solving process has this
Question: A consumer extended problem-solving process has this key characteristic: A consumer extended problem-solving process has this key characteristic: Here's the best way to solve it. Powered by Chegg AI. A consumer extended problem-solving process has th... View the full answer.
Involvement Levels
Salespeople play a critical role in answering consumer questions and providing extensive support during and after the purchasing stage. Limited Problem Solving. Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when ...
4.3: Buyer behavior as problem solving
Global Text Project. Consumer behavior refers to buyers who are purchasing for personal, family, or group use. Consumer behavior can be thought of as the combination of efforts and results related to the consumer's need to solve problems. Consumer problem solving is triggered by the identification of some unmet need.
Increasing Sales with Extended Problem Solving
Consumers with an extended problem solving mindset put a great deal of effort into their purchase decision, gathering information through research and taking care to evaluate all options, before arriving at a decision. Because of the time and energy committed to the search, this diligence is more likely dedicated to the selection and purchase ...
Low-Involvement versus High-Involvement Buying Decisions
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
6.3 Types of Consumer Decisions
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
3.2: Low-Involvement Versus High-Involvement ...
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
Key Terms and Concepts
12. Key Terms and Concepts. Cognitive dissonance (post-purchase dissonance): Also known as "consumer remorse" or "consumer guilt," this is an unsettling feeling consumers may experience post-purchase if they feel their actions are not aligned with their needs. Consumer involvement: A consumer's involvement level reflects how ...
29 Consumer Decision Making Process
29 Consumer Decision Making Process . An organization that wants to be successful must consider buyer behavior when developing the marketing mix. Buyer behavior is the actions people take with regard to buying and using products. Marketers must understand buyer behavior, such as how raising or lowering a price will affect the buyer's perception of the product and therefore create a ...
Identifying and Understanding Customer Behavior Flashcards
In an extended problem-solving process a salesperson can be useful because: they can engage with the consumer to discover the real needs and concerns. The best criteria for market segmentation for a retailer searching for a population group to serve would be:
Definition and Examples of the Consumer Decision-Making Process
5 steps of the consumer decision making process. Problem recognition: Recognizes the need for a service or product. Information search: Gathers information. Alternatives evaluation: Weighs choices against comparable alternatives. Purchase decision: Makes actual purchase. Post-purchase evaluation: Reflects on the purchase they made. The consumer ...
Consumer Behavior: Low-Involvement Versus High-Involvement Buying
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
Identifying and Understanding Customer Behavior Flashcards
The steps of the consumer buying process are contained in these three models: ... A consumer extended problem-solving process has this key characteristic: the consumer has little consideration for the buying decision. The key characteristic of a limited problem-solving mindset is: About us. About Quizlet; How Quizlet works;
3.2 Low-Involvement Versus High-Involvement Buying Decisions and the
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
Solved What is the key characteristic of a consumer's
Question: What is the key characteristic of a consumer's extended problem-solving process?ResponsesThe consumer will use their intuition to solve the problem.The consumer will use their intuition to solve the problem.The consumer will take more time to research their options.The consumer will take more time to research their options.The ...
Ch.5 Understanding Consumer Behavior Flashcards
A) Risk and Reward B) Price and Qualtiy C) Internal and External D) Social and Functional, Evaluative _____ are product attributes that are used to compare different offerings when making a purchase decision., The highest levels of consumer involvement in the decision process lead to _____ problem solving while the lowest levels lead to ...
The Consumer's Decision Making Process: Low ...
Limited problem solving falls somewhere between low-involvement (routine) and high-involvement (extended problem solving) decisions. Consumers engage in limited problem solving when they already have some information about a good or service but continue to search for a little more information. Assume you need a new backpack for a hiking trip.
Solved You are on question 5 of 15 Choose the BEST answer
See Answer. Question: You are on question 5 of 15 Choose the BEST answer What is the key characteristic of a consumer's extended problem-solving process? The consumer will use their intuition to solve the problem. The consumer will move rapidly as the problem needs to be resolved quickly. The consumer will take more time to research their options.

3.2 Low-Involvement Versus High-Involvement Buying Decisions and the Consumer’s Decision-Making Process

Stages in the Buying Process

Stage 1. Need Recognition

Stage 2. Search for Information

Stage 3. Product Evaluation

Stage 4. Product Choice and Purchase

Stage 5. Postpurchase Use and Evaluation

Stage 6. Disposal of the Product

Key Takeaways

Review Questions

Share This Book

Module 4: Consumer Behavior

Stages in the Buying Process

Stage 1. Need Recognition

Stage 2. Search for Information

Stage 3. Product Evaluation

Stage 4. Product Choice and Purchase

Stage 5. Post-purchase Use and Evaluation

Stage 6. Disposal of the Product

Key Takeaways

Review Questions

6.3 Types of Consumer Decisions

Levels of Involvement in Decision Making

You Try It!

Share This Book

29 Consumer Decision Making Process

The Consumer Decision Making Process

Need Recognition

Information Search

Evaluation of Alternatives

The Purchase Decision

Post-Purchase Behaviour

Media Attributions

Text Attributions

Share This Book

Definition and examples of the consumer decision-making process

What is the consumer decision making process

5 steps of the consumer decision making process

Steps in the consumer decision process

1. Problem recognition

2. Information search

3. Alternatives evaluation

4. Purchase decision

5. Post-purchase evaluation

Tools to better understand your customer

Customer journey map

Empathy map

User personas

About Lucidchart

Related articles

9 templates for marketers

Bring your bright ideas to life.

3.2 Low-Involvement Versus High-Involvement Buying Decisions and the Consumer’s Decision-Making Process

Stages in the Buying Process

Stage 1. Need Recognition

Stage 2. Search for Information

Stage 3. Product Evaluation

Stage 4. Product Choice and Purchase

Stage 5. Postpurchase Use and Evaluation

Stage 6. Disposal of the Product

Key Takeaways

Review Questions

Share This Book

BUS602: Marketing Management

The Consumer's Decision Making Process

Low-Involvement Versus High-Involvement Buying Decisions and the Consumer's Decision-Making Process

Stages in the Buying Process

Stage 1. Need Recognition

Stage 2. Search for Information

Stage 3. Product Evaluation

Stage 4. Product Choice and Purchase

Stage 5. Postpurchase Use and Evaluation

Stage 6. Disposal of the Product

Key Takeaways

Review Questions

IMAGES

VIDEO

COMMENTS