iit research papers in mechanical engineering

2. Ph.D Theses of IIT Kharagpur

• By Issue Date

Search within this community and its collections:

A dissertation (also called thesis or disquisition) is a document that presents the author's research and findings and is submitted in support of candidature for a degree or professional qualification. The word "thesis" comes from the Greek word, meaning "position", and refers to an intellectual proposition. The Indian Institute of Technology Kharagpur (commonly known as IIT Kharagpur or IIT KGP) is an autonomous engineering and technology-oriented institute of higher education established by the Government of India in 1951. The first of the seven IIT's to be established, it is officially recognized as an Institute of National Importance by the Government of India.

Indian Institute of Technology Kharagpur

Sub-communities within this community

• Subir Chowdhury School of Quality and Reliability Subir Chowdhury School of Quality and Reliability
• Environmental Science and Engineering
• Nanoscience and Technology
• School of Bio-Science (SBS)
• Deysarkar Centre of Excellence in Petroleum Engineering
• PK Sinha Centre for Bioenergy and Renewables
• Centre of Excellence in Artificial Intelligence
• Rekhi Centre of Excellence for the Science of Happiness Rekhi Centre of Excellence
• School of Energy Science and Engineering
• Physics & Meteorology
• Aeronautical Engineering
• Post Harvest Technology Centre
• Rajendra Mishra School of Engineering Entrepreneurship
• Advanced Technology Development Center
• Centre for Theoretical Studies
• School of Medical Science & Technology
• Electronics & Electrical Communication Engineering
• Electrical Engineering
• Cryogenic Engineering
• Biotechnology
• Civil Engineering
• Chemical Engineering
• Center for Educational Technology
• Architecture & Regional Planning
• Vinod Gupta School of Management
• School of Water Resources
• Rural Development Centre
• Rubber Technology Centre
• Ranbir and Chitra Gupta School of Infrastructure Design and Management
• Rajiv Gandhi School of Intellectual Property Law
• Oceans, Rivers, Atmosphere and Land Sciences
• Ocean Engineering & Naval Architecture
• Mining Engineering
• Metallurgical & Materials Engineering
• Materials Science
• Information Technology
• Humanities & Social Sciences
• G S Sanyal School of Telecommunications
• Mathematics
• Reliability Engineering Centre
• Geology & Geophysics
• Industrial and Systems Engineering Previously named as Industrial Management Centre
• Mechanical Engineering
• Computer Science & Engineering
• Agricultural & Food Engineering
• Aerospace Engineering

Collections in this community

• Computational Approaches to Protein Engineering and Its Applications to Unravel Pathogenesis
• Quasinormal Modes of Black Hole Mimickers
• Studies on aspects of gravity and geometry in dimensions D 4

Recent Submissions

• Role of Hydrogen Bonding in Physical and Chemical Property Characterization of Materials: An Atomistic Approach  Prasad, Dipak ( IIT Kharagpur , 2024-03 )
• Resistance Spot Welding of Similar and Dissimilar Sheet Materials with Carbonaceous Interlayers  Das, Tanmoy ( IIT Kharagpur , 2024-03 )
• Elucidating the Mechanisms of 17β-Estradiol-Dependent Immune Regulation of Endothelial and Th2 Cells  Hansda, Arman Kunwar ( IIT Kharagpur , 2024-02 )
• Studies on Feasibilities of Using Magnesium Silicide Prepared from Rice Husk and Natural Galena Concentrate for Preparing Thermoelements for Terrestrial Energy Conversion Devices and Materials for Electrical Energy Storage  Bose, Subhasis ( IIT Kharagpur , 1988-10 )
• Assessing the Spatial Growth Patterns of Tourist Destinations in India at the Risk of Overtourism  Sai Priya, Nunna Tagore ( IIT Kharagpur , 2024-02 )
• Utilization of Poorly Graded River Sand and Fly Ash in Sand-Asphalt-Sulphur Paving Mixes  Majumdar, Mayajit ( IIT Kharagpur , 1989 )
• Rice Big Grain1: Identification of Genetic Variation and Transgenic Expression for Crop Yield Improvement  Unknown author ( IIT Kharagpur , 2024-02 )
• Role of Local and Remote Forcing on the Mixed Layer Depth Variability Over the Bay of Bengal  Sadhukhan, Biplab ( IIT Kharagpur , 2024-01 )
• Genetic Manipulation of Starch Biosynthesis in Microalga Chlorella Vulgaris for Improved Production of Biofuel and Valuable Co-Products  Saha, Sumedha ( IIT Kharagpur , 2024-02 )
• Depth Map Completion Using Non-Local and Low-Rank Priors  Satapathy, Sukla ( IIT Kharagpur , 2024-01 )
• Robust Learning in Asynchronous Event Data and Multi-agent Team Competitions  Koley, Paramita ( IIT Kharagpur , 2023-04 )
• Engineered Nano-Particulate and Hydrogel-Based Biomaterials for Bone Tissue Regeneration  Mukundan, Lakshmi M. ( IIT Kharagpur , 2024-03 )
• A Numerical Study Supplemented by Theoretical Analysis on Electrophoresis and Diffusiophoresis of Rigid Colloids in Liquid as well as Gel Medium Comprising Finite Ion Size Effects  Bhaskar, Babu ( IIT Kharagpur , 2024-03 )
• Non-Invasive Cardiovascular Condition Screening Using Lumped Parameter Models  Dash, Ashutosh ( IIT Kharagpur , 2024-02 )
• A Study of Defects and Disorders on the Electronic, Magnetic, and Optical Properties of Certain Double-Perovskite Manganites  Khan, Anasua ( IIT Kharagpur , 2023-09 )
• A Machine Learning Approach for Network-on-Chip Architecture Design  Sambangi, Ramesh ( IIT Kharagpur , 2024-02 )
• Exploring Anisotropic Optical Resonances in 2D Materials and Its Applications  Dhara, Avijit ( IIT Kharagpur , 2024-03 )
• Biomechanical Analysis of the Lumbar Spine: Design and Development of Porous Interbody Cage  Talukdar, Rahul Gautam ( IIT Kharagpur , 2023-10 )
• Comics and the City: Urbanity, Infrastructure, and the Politics of Indian Sequential Narratives  Sarkar, Ritam ( IIT Kharagpur , 2024-02 )
• Formal Methods for Design and Analysis of Physically Unclonable Functions  Chatterjee, Durba ( IIT Kharagpur , 2024-02 )

Search DSpace

All of dspace.

• Communities & Collections

This Community

• Kumar, Pankaj (4)
• Chakraborty, Rajib (3)
• Chakraborty, Sudip (3)
• Das, Amit Kumar (3)
• Das, Debabrata (3)
• Das, Ipsita (3)
• Das, Sourav (3)
• Kumar, Amit (3)
• Kumar, Arun (3)
• Kumar, Rajesh (3)
• ... View More
• Microstructure (50)
• Heat Transfer (46)
• Irrigation (35)
• Kinetics (35)
• Nanocomposites (32)
• Mechanical Properties (29)
• Optimization (27)
• Simulation (27)

Date Issued

• 2020 - 2024 (1496)
• 2010 - 2019 (2513)
• 2000 - 2009 (978)
• 1990 - 1999 (654)
• 1980 - 1989 (552)
• 1970 - 1979 (310)
• 1960 - 1969 (223)
• 1956 - 1959 (34)

Has File(s)

• Skip to Menu
• Skip to Content
• Skip to Footer
• Campus Life
• Featured Research
• Aerospace Engineering
• Chemical Engineering
• Electrical Engineering
• Materials Science & Engineering
• Mathematics & Statistics
• Mechanical Engineering
• Associate Members

Research Papers

• Internships
• Computational
• Experimental Facilities
• Publications
• A. Pandey, M. K. Verma and P. K. Mishra, "Scaling of heat flux and energy spectrum for very large Prandtl number convection," Phys. Rev. E 89 023006, 2014. [Download pdf]
• D. Nath and M. K. Verma, " Numerical simulation of convection of argon gas in fast breeder reactor," Annals of Nuclear Energy 63 51–58, 2014.
• K. S. Reddy and M. K. Verma, "Strong anisotropy in quasi-static MHD turbulence for high interaction parameters," Phys. Fluids 26, 025109, 2014.
• M. K. Verma, A. Pandey, P. K. Mishra, and M. Chandra, “Role of bulk flow in turbulent convection”, AIP Conference Proceedings 1582, 224, 2014. [Download pdf]
• V. S Punati, I. Sharma , and P. Wahi , “Contact mechanics of structured adhesives”, at Annual Meeting of the Adhesion Society, San Diego, California, USA, February 23-26, 2014.
• D Bhandary, S Khan and JK Singh, "Structure and Dynamics of Self-Assembled Monolayer of n-Alkanols on a Mica Surface," J. Phys. Chem. C, 2014.
• AK Metya, S Khan and JK Singh , "Wetting Transition of Ethanol-Water Droplet on Smooth and Textured Surfaces," J. Phys. Chem. C 118, 4113, 2014 [Download pdf]
• S Khan and JK Singh , "Wetting Transition of Nanodroplets of Water on Textured Surfaces: A Molecular Dynamics Study," Mol. Sim. 40, 458, 2014 [Download pdf]
• JK Singh  and Muller-Plathe F, "On the characterization of crystallization and ice adhesion on smooth and rough surfaces using molecular dynamics App," Phys. Lett. 104, 021603, 2014 [Download pdf]
• Patra TK and JK Singh , "Polymer directed aggregation and dispersion of anisotropic nanoparticles Soft Matter," 10, 1823, 2014 [Download pdf]
• Abhishek, “Prediction of Helicopter Blade Loads for an Unsteady Pull-up Maneuver Using Lifting-line and CFD/CSD Analyses," Journal of Aerospace Sciences and Technologies, Vol. 65, No. 2, May 2013, pp. 178-195.
• P. Aishwarya , S. Setu , P. Singh and Abhishek, “ Design and Development of an Autonomous Coaxial Rotor Micro Air Vehicle,” to be presented at 9th International Conference on Intelligent Unmanned Systems, Jaipur, 25 – 27 September, 2013.
• S.  Setu and Abhishek, “Development of a Coaxial MAV with Real Time Collision Avoidance Capability,” to be presented at 9th International Conference on Intelligent Unmanned Systems, Jaipur, 25 – 27 September, 2013.
• A. Chatterjee, "Better rank assignment in multiple-choice entrance exams." Current Science, vol. 105(2), 2013, 193-200.
• Animangsu Ghatak, "Bio-inspired adhesion", Guest Editorial, Journal of Adhesion Science and Technology2013, published online.
• S. Das and A. Chatterjee, "Numerical stability analysis of linear incommensurate fractional order systems." ASME Journal of Computational and Nonlinear Dynamics, vol. 8(4), 2013, 041012:1-6. [DOI: 10.1115/1.4023966].
• S. Das and A. Chatterjee, "Simple recipe for accurate solution of fractional order equations." ASME Journal of Computational and Nonlinear Dynamics, vol. 8(3), 2013, 031007:1-7. [DOI: 10.1115/1.4023009].
• A. K. Saha, "Unsteady Flow Past a Finite Square Cylinder Mounted on a Wall at Low Reynolds Number." Computers and Fluids, Vol. 88 (15), pp. 599-615, 2013.
• A. K. Saha, "Direct Numerical Simulation of Two-Dimensional Flow Past a Normal Flat Plate," ASCE J. of Engineering Mechanics, Vol. 139 (12), pp. 1894-1901, 2013.
• I. Sharma, "Structural stability of rubble-pile asteroids". Icarus 223 , 367-382, 2013. [Download pdf]
• S. L. Das, T. Mandal and S. S. Gupta, "Inextensional vibration of zig-zag single-walled carbon nanotubes," International Journal of Solids and Structures , 50, 2792-2797, 2013.
• A. Kumar, , S . Das, and P. Wahi, "Effect of radial loads and boundary conditions on the natural frequencies of a thin walled circular cylindrical shell ," 20 th International Conference on Sound and Vibration, Bangkok, Thailand, 2013.
• A. Kumar, S. L. Das, and P. Wahi, “Effect of radial hydrostatic loads and boundary conditions on the natural frequencies of thin walled circular cylindrical shells”, at International Conference on Vibration Problems, Lisbon, Portugal, September 9 12, 2013.
• A. K. Mandal, and P. Wahi, “Effect of bridge on the coupled plate-string vibrations in some Indian stringed musical instruments," at Acoustics 2013, New Delhi, India, November 10 15, 2013.
• A. K. Mandal,  and P. Wahi , “Modal interactions in strings vibrating against an obstacle: relevance to musical instruments like Sitar and Tanpura”, at International Conference on Vibration Problems, Lisbon, Portugal, September 9 12, 2013.
• S. Tiwari, and  P. Wahi , “Relating natural frequencies of vibration of top plate of a violin with position of soundpost”, at International Conference on Vibration Problems, Lisbon, Portugal, September 9 12, 2013.
• A. K. Saha, and P. Wahi , “Controlling the nature of bifurcation in friction-induced vibrations with a dynamic (LuGre) friction model by delayed position feedback”, at International Conference on Vibration Problems, Lisbon, Portugal, September 9 12, 2013.
• V. S Punati, I. Sharma ,  and P. Wahi , “Contact of a circular punch with an adhesive layer ”, at Gordon Research Conference on Adhesion, Science of Interfacial Chemistry and Mechanics in Hard and Soft Material Systems, Massacussates, USA, July 14-19, 2013.
• S. K. Gupta, and  P. Wahi, “Modelling self-interruption in drill-string dynamics”, at International Conference on Vibration Problems, Lisbon, Portugal, September 9 12, 2013.
• Puneet Singh, and C. Venkatesan, "Experimental performance evaluation of coaxial rotors for a micro aerial vehicle ",  Journal of Aircraft, Vol. 50, No. 5, 2013.
• C. Venkatesan, B.B. Swaroop, P., Haritha, and R. Gupta, "Development of autonomous mini helicopter: Challenges faced,"  Journal of Aerospace Sciences and Technologies, Vol. 65, No. 1A, Feb, 2013.
• Rohin Kumar and C. Venkatesan, "Rotorcraft Aeroelastic Analysis using Dynamic Wake/Dynamic Stall Models and its Validation," International Forum on Aeroelasticity and Structural Dynamics IFASD-2013, Bristol, UK, June 2013. 
• Rohin Kumar and C. Venkatesan, "Aeroelastic Analysis of a Helicopter in Steady Maneuver using Dynamic Wake/Dynamic Stall Models," European Rotorcraft Forum Moscow, Russia, September 2013. 
• C. Vinodhini, Puneet Singh, and  C. Venkatesan, "Position Estimation for Autonomous Hover of a Mini-Helicopter," International Conference on Intelligent Unmanned Systems Jaipur, India, September 2013. 
• P. Haritha, M. Shamsheer, and  C. Venkatesan, "`Semi Autonomous Hovering of a Mini Helicopter With Tethers," International Conference on Intelligent Unmanned Systems, Jaipur, India, September 2013. 
• Gaurab Dutta, and C. Venkatesan, "Analytical and Empirical Modeling of Multilayered Elastomeric Isolators from Damping Experiments,"  Journal of Sound and Vibration, 332, 2013. [Download pdf]
• R. Neelamegam, V. Shankar and Debopam Das, "Suppression of purely-elastic instabilities in the torsional flow of viscoelastic fluid past a soft solid," Physics of Fluids , 25 , 124102 ,2013. [Download pdf]
• Gaurav and V. Shankar, "Manipulation of interfacial instabilities in core-annular flows using a deformable solid layer," Physics of Fluids , 25 , 014104 , 2013. [ Download pdf]
• M. K. Verma, A. Chaterjee, S. Paul, K. S. Reddy, R. Yadav, M. Chandra, and R. Samtaney, "Benchmarking and scaling studies of a pseudospectral code Tarang for turbulence simulations," Pramana, 2013. [Download pdf]
• R. Kumar, M. K. Verma and R. Samtaney, "Energy transfers and magnetic energy growth in small-scale dynamo," EPL 104, 54001, 2013. [Download pdf]
• M. K. Verma and R. K. Yadav, "Supercriticality to subcriticality in dynamo transitions," Phys. Plasmas 20, 072307, 2013. [Download pdf]
• C. K Das and J. K Singh , "Effect of confinement on the solid-liquid coexistence of Lennard-Jones," Fluid J. Chem. Phys. 139, 174706, 2013.
• T. K Patra  and J. K Singh , "Coarse-grain molecular dynamics simulations of nanoparticle-polymer melt: Dispersion vs. Agglomeration," J. Chem. Phys. 138, 144901, 2013 [Download pdf]
• C. K Das  and J. K Singh , "On the melting transition of Lennard-Jones solids in slit pores," Thereotical Chemistry Accounts, 132,1351, 2013 [Download pdf]
• A. K Sharma, P . Khare,  J. K Singh and N Verma, "Preparation of novel carbon microfiber/carbon nanofiber-dispersed polyvinyl alcohol-based nanocomposite material for lithium-ion electrolyte battery separator," Mat. Sci. Eng . C 33, 1704, 2013 [Download pdf]
• Mohite PM and  CS Upadhyay, "A generalized adaptive analysis of laminated plates," Vol. 112-113, December 2012, 217-234 . [Download pdf]
• A. Bano , PM. Mohite , A.  Kumar, " Buckling of laminated plates considering pre-buckled stress state," 8 th European Solid Mechanics Conference, Graz, Austria, 9-13 July 2012. [Download pdf]
• A. Bano , PM. Mohite , A.  Kumar, " Buckling of laminated plates with cutout using higher order theory," 4 th International Congress on Computational Mechanics and Simulations, Hyderabad, India, 9-12 December 2012. [Download pdf]
• M.K Verma,"Variable enstrophy flux and energy spectrum in two dimensional turbulence with Ekman friction", EPL, 98, 14003, 2012, [Download pdf]
• I . Sharma, "Stability of non-smooth rubble-pile asteroids." J. Fluid Mech. 708 , 71-99,2012. [Download pdf]
• R. Dalmeya, I. Sharma, C. Upadhyay and A. Anand. "Contact of a Rigid Cylindrical Punch with an Adhesive Elastic Layer." J. Adhesion. 88 , 311,2012. [Download pdf]
• S.S. Gautam and P.M. Dixit, "Numerical simulation of ductile fracture in thin-walled tube impacted against a rigid surface", International Journal of Damage Mechanics, 21(3), 341-371, 2012.
• Md S. Rizvi, and S. L. Das, "Role of membrane addition in animal cell cytokinesis," Journal of Theoretical Biology , 315, 139, 2012.
• A. Verma , N.  Raj, S.  Srivastava, and Abhishek, "Design of Control System for Gust Resistant Micro Air Vehicle," Proceedings of 8th International Conference on Intelligent Unmanned Systems, Singapore, 22 – 24 October, 2012.
• A. Dwivedi , S. Srivastava , and Abhishek, "Development of Auto Take Off and Landing System for a Coaxial MAV," Proceedings of 8th International Conference on Intelligent Unmanned Systems, Singapore, 22 – 24 October, 2012.
• S. Srivastava , A. Dwivedi , and Abhishek, “Characterization of Vibration Absorber for Mounting Sensors on Micro Air Vehicles,” Proceedings of 8th International Conference on Intelligent Unmanned Systems, Singapore, 22 – 24 October, 2012.
• V. S Punati, I. Sharma , and P. Wahi , “Contact of an adhesive circular punch with an elastic beam”, at International Congrees on Computational Mechanics and Simulation, Hyderabad, India, December 09-12, 2012.
• P. Wahi ,  “Stability of the state-dependent delay model of turning with depth of cut variation”, at the 23rd International Congress of Theoretical and Applied Mechanics, Beijing, China, August 19-24, 2012.
• N. Rajesh and R. Kitey, "Dynamic mechanical behavior of epoxy variant sandwich structures,"  3rd Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS), Dec 2012, IIT Delhi, India.
• Puneet Singh, and C. Venkatesan, "Aerodynamic Performance of a Coaxial Rotor System for MIcro Air Vehicles," International Conference on Intelligent Unmanned Systems, Singapore, October 2012.
• B.B. Swaroop, P. Haritha, and Venkatesan, , "`Flight Testing of a Mini Helicopter in Hover," International Conference on Intelligent Unmanned Systems, Singapore, October 2012. 
• S. Paul, M. K. Verma, P. Wahi, Sandeep K. Reddy, K. Kumar, "Bifurcation analysis of the flow patterns in two-dimensional Rayleigh-Bénard convection." Int. J. Bifurcation Chaos 22, 1230018, 2012. [Download pdf]
• M. K. Verma, P. K. Mishra, A. Pandey, S. Paul, "Scalings of field correlations and heat transport in turbulent convection." PRE 85, 016310, 2012. [Download pdf]
• R. K. Yadav, M. K. Verma, and P. Wahi, "Bistability and chaos in the Taylor-Green dynamo," PRE 85, 036301, 2012. [Download pdf]
• S Khan, D Bhandaryand J. K Singh, "Surface Phase Transition of Multiple Sites Associating Fluids," Mol . Phys . 110,1241, 2012.
• A. K Metya, A Hens and J. K Singh, Molecular dynamics study of vapor-liquid equilibria and transport properties of Sodium and Lithium based on EAM potentials Fluid Phase Equil . 313,16, 2012.
• C. Venkatesan, "Feeling: a measurable quantity? ," Current Science, Vol. 100, No. 9, May 2011.
• PM. Mohite, "Intralaminar damage modeling in fibrous composites: A micromechanical approach, Indo-French Seminar on High Performance Composites Aeronautics and Space Applications and Extreme Environments," Organized by CEFIPRA/IFCPAR (Indo-French Centre for Promotion of Advanced Research), November 30 - December 1, 2011, Bangalore (Invited Speaker).
• A. Sharma, N. Rajesh, V. K. Surla, and R. Kitey, "Dynamic mechanical behavior of resin/hardener ratio based epoxy variants," XVII National seminar on Aerospace Structures (NASAS), Sep 2011, IIT Kanpur, India.
• Abhishek, “Modelling of Large Deformations in Rotors Using Second Order Beam Model Coupled to Multibody Formulation,” XVIIth National Seminar on Aerospace Structures (NASAS), IIT Kanpur, Kanpur, September 22 - 24, 2011.
• A. K. Saha, P Wahi , " Delayed feedback for controlling the nature of bifurcations in friction-induced vibration s " Journal of Sound and Vibration 330 (25), 6070-6087 .
• A. Kumar, S. L. Das, and P. Wahi, “Dynamic buckling of thin-walled cylindrical shells subjected to fluctuating radial loads”, at the Twenty-First International Conference on Structural Mechanics in Reactor Technologies, New Delhi, India, November 6-11, 2011.
• S. Kumar, B. Kaushik, I. Sharma, and P. Wahi, “Effect of clearance on the dynamic response of a single fuel subassembly”, at the Twenty-First International Conference on Structural Mechanics in Reactor Technologies, New Delhi, India, November 6-11, 2011.
• R.K. Saxena and P.M. Dixit, "Numerical analysis of damage in deep drawing process," Finite Elements in Analysis and Design, 47(9), 1104-1117, 2011.
• S.S. Gautam, Raman Babu and P.M. Dixit, "Ductile fracture simulation in the Taylor rod impact test using continuum damage mechanics," International Journal of Damage Mechanics, 20(3), 348-369, 2011.
• A. Kumar, , S . Das, and P. Wahi, "Dynamic buckling of thin-walled circular cylindrical shells subjected to fluctuating radial loads," SMiRT 21, New Delhi, India, 2011.
• Abhishek, and S. Setu, “Preliminary Design of Collision Avoidance System for Micro Air Vehicle,” Proceedings of 7th International Conference on Intelligent Unmanned Systems, Chiba, Japan, 30 October–2 November, 2011.
• Abhishek, “Modelling of Large Deformations in Rotors Using Second Order Beam Model Coupled to Multibody Formulation,” XVIIth National Seminar on Aerospace Structures (NASAS), IIT Kanpur , Kanpur, September 22 - 24, 2011.
• Abhishek, and I. Chopra , “Prediction and Validation of UTTAS Pull-up Maneuver Using CFD/CSD,” 13th AIAA Dynamics Specialists Conference, Denver, Colorado, 4 - 7 April, 2011.
• R. Vishnu Prasad, B. Swaroop, and C. Venkatesan,"Characterisation of Actuators, Sensors and Wireless System for Autonomous Tethered Hover of a Mini-Helicopter ", International Conference on Intelligent Unmanned Systems, Chiba, Japan, November 2011. 
• S. Paul, P. Wahi and M. K. Verma, "Bifurcations and chaos in large Prandtl-number Rayleigh-Bénard convection ," Int. J. Non-Lin. Mech. 46, pp 772, 2011. [Download pdf]
• M. K. Verma, P. K. Mishra, M. Chandra, and S. Paul, “Energy spectra in Rayleigh-Benard convection”, 13th European Turbulence Conference (ETC13), Journal of Physics: Conference series 082014, 318, 2011. [Download pdf]
• R. Yadav, M. K. Verma, M. Chandra, S. Paul, and P. Wahi, “Bifurcations and Chaos in Taylor-Green Dynamo”, UA Huntsville Workshop, Partially Ionized Plasmas throughout the Cosmos, Oct. 3-8, 2010, AIP Conf. Proc. 1366, 129, 2011. [Download pdf]
• S Khan and J. K Singh, "Surface Phase Transition of Associating Fluids on Functionalized Surface," J. Phys. Chem. C . 115, 17861, 2011 [Download pdf]
• R C Dutta, S Khan and J. K Singh , " Wetting transition of Water on Graphite and Boron-Nitride Surfaces: A Molecular Dynamics Study " , Fluid Phase Equil.  302,310, 2011 [Download pdf]
• PM Mohite, CS Upadhyay, "A generalized adaptive finite element analysis of laminated composite plates," 37 th Solid Mechanics Conference, Warsaw, Poland, 6-10 September 2010. [Download pdf] 
• S. Das, "Influence of the bending rigidity and the line tension on the mechanical stability of micropipette aspirated vesicles," Physical Review E, 82, 021908, 2010 (Also appearing in the August 15, 2010 issue of Virtual Journal of Biological Physics Research).
• A K. Saha, P Wahi ," Controlling the bifurcation in friction induced vibrations using delayed feedback. " Time Delay Systems 9 (1), 265-270.
• Animangsu Ghatak ,"Peeling off an adhesive layer with spatially varying modulus ," Physical Review E 2010, 81, 021603.
• I. Sharma, "Equilibrium shapes of rubble-pile binaries: The Darwin ellipsoids for for gravitationally held granular aggregates". Icarus 205 , 638-657, 2010. [Download pdf]
• S.S. Gautam and P.M. Dixit, "Ductile failure simulation in spherodized steel using continuum damage mechanics coupled finite element formulation," International Journal of Computational Methods, 7(2), 319-348, 2010. 
• R.K. Saxena, S.S. Gautam and P.M. Dixit, "Numerical simulation of fracture in cup drawing," International Journal of Material Forming, 3(1), 117-120, 2010.
• R.K. Saxena and P.M. Dixit, "Prediction of flange wrinkling in deep drawing process using bifurcation criterion," Journal of Manufacturing Processes, 12(1), 19-29, 2010.
• P. K. Mishra and M. K. Verma, "Energy spectra and fluxes for Rayleigh-Bénard convection," PRE 81, 056316, 2010. [Download pdf]
• P. K. Mishra, P. Wahi, and M. K. Verma, "Patterns and Bifurcation in low-Prandtl-number Rayleigh-Bénard convection," EPL 89, 44003, 2010. [Download pdf]
• R. K. Yadav, M. Chandra, M. K. Verma, S. Paul, and P. Wahi, "Dynamo transition under Taylor-Green forcing," EPL 91, 69001, 2010. [Download pdf]
• M. K. Verma, R. Yadav, M. Chandra, S. Paul, and P. Wahi, “Dynamo Transition”, International Symposium on Waves, Coherent Structures & turbulence in Plasmas, Jan 12-15, 2010, AIP Conf. Proc. 1308, 25, 2010. [Download pdf]
• R. Kumar, M. K. Verma, and V. Kumar, “Anisotropic turbulence studies of liquid metal MHD flows using numerical simulations”, 23rd National Symposium on Plasma Science & Technology (PLASMA-2008), Mumbai 2008, Journal of Physics: Conference Series 208, p. 012007, 2010.
• P. Wahi, “Analytical study of Hopf bifurcations in frictional chatter models”, at the Summer school and Conference on Advanced Problems in Mechanics APM2010, St. Petersburg, Russia, July 1-4, 2010.
• P. Wahi,   P. K. Mishra,  S. Paul, and M. K. Verma,  “Nonlinear dynamics of low- Prandtl number Rayleigh-B´enard convection”, in Proceedings of the IUTAM Symposium on Nonlinear Dynamics for Advanced Technologies and Engineering Design (NDATED), Aberdeen, Scotland, UK, July 27-30, 2010.
• S. Kumar,  I, Sharma, and  P. Wahi, “Nonlinear response of a flexible member supported non-ideally at one end”, at the Summer school and Conference on Advanced Problems in Mechanics APM2010, St. Petersburg, Russia, July 1-4, 2010.
• A. K. Saha, and P. Wahi, “Controlling the bifurcation in friction-induced vibrations using delayed feedback”, in Proceedings of the 9th IFAC Workshop on Time Delay Systems, TDS 2010, Prague, Czech Republic, June 7 - 9, 2010.
• S. Paul, S. Reddy, P. Wahi, and M. K. Verma, “A bifurcation scenario for large-P Rayleigh-Benard Convection”, at the 3rd Chaotic Modeling and Simulation International Conference (CHAOS2010), Crete, Greece, June 1-4, 2010.
• P. Wahi , “Instabilities and chaos in convective flows”, at the Workshop on Thermoacoustic Instabilities, Chennai, India, January 18-22, 2010.
• V. L. Sateesh, C.S. Upadhyay, and C. Venkatesan, "Nonlinear analysis of smart composite plates including hysteresis effects,"  AIAA Journal, Vol. 48, No. 9, Sept. 2010.
• V. L. Sateesh, C.S. Upadhyay, and C. Venkatesan, "A study of polarisation-electric field nonlinear effect on the response of smart composite plates,"  Smart Materials and Structures, Vol. 19, No. 7, July 2010.
• B. Swaroop, H. Ravinder, and  C. Venkatesan, "`Rotor Load Measurements and Stabilisation in Tethered Hover of a Mini-Helicopter," International Conference on Intelligent Unmanned Systems, Bali, Indonesia, November 2010. 
• Gaurav and V. Shankar, "Role of wall deformability on interfacial instabilities in gravity-driven two-layer flow with a free surface," Physics of Fluids , 22 , 094103, 2010. [Download pdf]
• Gaurav and V. Shankar, "Stability of pressure-driven flow in a deformable neo-Hookean channel," Journal of Fluid Mechanics , 659 , 318-350, 2010. [Download pdf]
• S Khan and J. K Singh, "Prewetting transitions of one site associating," fluids J. Chem. Phys . 132, 144501, 2010 [Download pdf]
• A. De, "Distribution of Peak Horizontal Floor A, "Large Eddy Simulation of turbulent premixed combustion," 8th Annual Graduate Student Conference, Mechanical Engineering Department, LSU, USA, April 18, 2009.
• A. K. Saha, "Effect of Transitions on Flow Past a Square Cylinder at Low Reynolds Number," ASCE J. of Engineering Mechanics, Vol. 135 (8), pp. 839-851, 2009.
• JK. Singh, "Molecular Modeling and Simulation: Can it help in the development of micro and nano devices in Microfluidics and Microfabrication," Edited by S. Chakroborty, Springer (USA), 1st Ed, (2009) (ISBN: 978-1441915429)
• I. Sharma, "Equilibrium shapes of rubble-pile satellites: The Darwin and Roche ellipsoids for gravitationally held granular aggregates." Icarus 200 , 636-654, 2009. [Download pdf]
• R.K. Saxena and P.M. Dixit, "Finite element simulation of earing defect in deep drawing," International Journal of Advanced Manufacturing Technology, 45(3), 219-233, 2009.
• P. Wahi, “Patterns and chaos in convection through bifurcations”, at the International Conference on Turbulence with a focus on MHD, Liquid metal and Dynamo, Kanpur, India, December 21-23, 2009.
• P. Wahi,  “Galerkin projections for delayed systems with variable delays: a statedependent delay model for turning”, at the Recent Advances in Nonlinear Mechanics, Kuala Lumpur, Malaysia, August 24-27, 2009.
• A. K. Saha, and  P. Wahi, “Control of friction-induced vibrations by time-delayed position feedback”, at the International Conference on Vibration Problems, Kharagpur, India, January 11-14, 2009.
• V. Laxman and C. Venkatesan,  "Formulation of a computational aeroelastic model to predict trim and response of a helicopter rotor system,"  Journal of Aerospace Sciences and Technologies, Vol. 61, No. 3, Aug. 2009.
• V. Laxman and C. Venkatesan, "Influence of dynamic stall and dynamic wake effects on helicopter trim and rotor loads,"  Journal of the American Helicopter Society, Vol. 54, No. 3, July 2009.
• M . Rohin Kumar, V. Laxman and C. Venkatesan, "`Development of a Computational Aeroelastic Model for a Helicopter in Level Flight and Maneuvering Conditions,"
• B. Swaroop, M. Dhadwal, A. Kuashari, C.S. Upadhyay, and C. Venkatesan, "Experimental Studies in the Development of an Autonomous Mini Helicopter," ICEAE 2009, Indian Institute of Science, Bangalore, May 2009.
• B. Swaroop, M. Dhadwal , and  C. Venkatesan, "Experimental Studies on Pitch-Roll-Yaw Control of a Mini Helicopter on a Test Rig," AHS Specialists' Meeting, International Forum on Rotorcraft Multidisciplinary Technology, Seoul, Korea, October 2009.
• V .L. Sateesh, C.S. Upadhyay, and  C. Venkatesan, "`A Study of Piezo Lay-up Configuration and Ply Orientation of Smart Composite Plates," XVI-National Seminar on Aerospace Structures, Indian Institute of Technology-Bombay, Mumbai, November 2009.
•   V. Laxman and C. Venkatesan, "Computational Aeroelastic Formulation for Predicting Helicopter Trim and Loads," Invited Paper, Symposium on Applied Aerodynamics and Design of Aerospace Vehicles (SAROD-2009), National Aerospace Laboratories, Bangalore, December 2009.   
• Gaurav and V. Shankar, "Stability of fluid flow through deformable neo-Hookean tubes," Journal of Fluid Mechanics , 627 , 291-322, 2009. [Download pdf]
• J. K Singh, "Surface tension and vapor-liquid phase coexistence of variable range hard-core attractive Yukawa," fluids,Mol. Sim. (Special Issue on Frontiers of Molecular Simulation) , 35,880, 2009 [Download pdf]

Joomla Template Designed by IceTheme

• Latest News
• Announcements

Mechanical Engineering Theses/Dissertations

Central Library Indian Institute of Technolgy Ropar Punjab -140001

• हिन्दी │ Eng

29 July, 2024

Nptel course on design of mechatronic systems, 28 july, 2024, me ug orientation 2024 batch, 19 july, 2024, new minor in robotics, 12 february, 2024, prof. shyamprasad karagadde has been awarded the faculty award for research excellence (fare) instituted by th…, 19 january, 2024, prof. prasanna gandhi honoured in recognition of his contribution to isro's first moon landing mission, 11 january, 2020, inauguration of advanced mechanical testing facility (amtf), 9 june, 2019, prof. sandip saha elected as member of nasi, allahabad, 1 october, 2018, details of phd projects being offerend in mechanical engineering, 26 september, 2018, prof amit agrawal receives shanti swarup bhatnagar prize for the year 2018., 9 august, 2024, phd thesis by mr. mallah santosh ramagya on experimental and numerical study on flow across a bio-inspired fla…, 1 august, 2024, elastodynamic discontinuities across length scales, 31 july, 2024, "ic engine phase-out for carbon neutrality: are we in the right direction...", 10 april, 2024, nuclear powers the global energy transition, global and indian nuclear scenarios, 22 march, 2024, ph.d. viva-voce examination of mr. pratyush kumar, 13 march, 2024, non-equilibrium plasma and its use in combustion: a modeling perspective, 8 february, 2024, phd viva-voce examination of ritesh dadhich on development of a spectral solver for crystal plasticit, 1 february, 2024, ph.d. defence of amir hamza siddiqui on novel cruciform specimen design and plastic flow behaviour of anisotro…, ph.d. defense of mr. harish veeravenkata on ab-initio modelling of materials for energy applications, 31 january, 2024, phd defense of mr. vishwas divse on progressive damage modeling of fiber reinforced plastic composites includi…, final phd viva-voce examination of mr. ritam chatterjee on development of mean-field and full-field crystal pl…, 17 january, 2024, language conditioned human robot interactions, 5 january, 2024, mechquest (explore, engage, excel), 13 december, 2023, ph.d. defense of mr. debaraj sahoo, 20 august, 2023, "the 61st convocation/departmental degree award functions (ddaf), organised by department of mechanical e…, 61st convocation/degree distribution function, department of mechanical engineering, iit bombay, 3 august, 2023, ug orientation schedule for new entrants(2023-2024), 11 january, 2023, talk by dr shashwat bhattacharya, 25 november, 2022, ph d defence of aman kukreja on friday 25th nov. at 10:00 am in the me auditorium., 24 november, 2022, ph.d. viva-voce examination of diwakar janghel@400pm@24 november 2022@thursday, 18 november, 2022, prof pavel hora's talk on opportunities and risks of h2e mobility from the perspective of global raw mate…, 16 november, 2022, mahesh thorat ph d thesis defence seminar 16th nov 4 pm darcy, 14 november, 2022, phd defence of mr. yogi ketankumar jayantkumar on jet impingement heat transfer with metal foam, 11 november, 2022, phd thesis defense seminar of mr. sumit kumar maurya, 9 november, 2022, objective interpretation of noise pollution rules, 28 september, 2022, phd defense of mr sachin kanhurkar: 28th sept, 19 september, 2022, invited lecture by prof. satyandra k. gupta of university of southern california, 29 april, 2022, phd screening test (autumn 2022-23) on 4th may, 2022, 28 september, 2021, online workshop on "static and dynamic characterization of micro-components", 11 december, 2020, structural integrity conference and exhibition (sice 2020), 21 november, 2020, nmd-atm 2020, 27 may, 2020, the resurgence of artificial intelligence: opportunities and apprehensions, 4 march, 2020, envisioning the future of engineering education through makerspaces, ph.d. thesis defense of mr. hemanshul garg, seminar: emerging role of multi-scale modeling and simulations in composite manufacturing processes, 16 december, 2019, three dimensional finite element investigations, 15 december, 2019, ph.d. thesis defense of mr. jyoti shankar jha, 13 december, 2019, field dislocation mechanics, phd viva-voce examination of mr. desai indrajit anandrao vimal, 29 november, 2019, ph.d. defence of mr. kasar satyajit vilas, 26 november, 2019, phd viva-voce examination of mr. satyabrata dhala, 11 september, 2019, thermal spray as an additive and layered manufacturing technology for applications in energy systems, 3 september, 2019, seminar on from thermodynamic databases and to smart factory in steelmaking, 23 august, 2019, capabilities, applications, and practical approach of openfoam, 6 august, 2019, nonlinear dynamics in microelectromechanical systems, 5 august, 2019, phd viva-voce examination of mr. gavasane abhimanyu rameshwar, 31 july, 2019, phd viva-voce examination: interferometric study of heat transfer characteristics of dilute nanofluids under n…, 29 july, 2019, ir materials for microbolometer application, 25 july, 2019, development and characterization of a gox-lhc rocket and combustion characterization of new fuels, 23 july, 2019, schedule for registration & orientation of new m.tech./ ph.d. entrants 2019-20 batch, 18 july, 2019, phd defense: coupled neutronic and thermal hydraulic safety analysis of large nuclear reactors, 17 july, 2019, science, its origin, beginning and early development, its continual progress and its final destination, 10 july, 2019, phd viva-voce examination of mr. anup kundu, 8 july, 2019, phd viva-voce examination, 17 may, 2019, the ph.d. viva-voce examination of mr. sooraj p, 30 april, 2019, microwaves as energy efficient approach: modeling and material processing, 26 april, 2019, in-situ tem nanomechanical testing of ultrathin microspecimens, 15 april, 2019, cnmf 2019 conference - critical non-ferrous metals: establishing the value chain, 29 march, 2019, quest for equations beyond the navier-stokes, me department colloquium by prof amit agrawal on 29th march, 27 march, 2019, ph.d defense of mr. vinay c raj (research assistantship (ra)category), 19 march, 2019, phd defence, 11 march, 2019, phd defence: kamlesh joshi, 8 march, 2019, linking computational fluid dynamics (cfd ) with thermodynamics: few case studies, 5 march, 2019, shear wave rheometry with applications in elastography, 27 february, 2019, autonomous underwater robotics at various size scales, 15 february, 2019, diamond jubilee conference, feb 15 - feb 16, 2019, 15 january, 2019, 27th national symposium on cryogenics and superconductivity (nscs-27), 14 january, 2019, phd qualifying exam for me students, 4 january, 2019, vortex dynamics on 2d curved surfaces using discrete exterior calculus, 2 january, 2019, welcome and registration of new ph.d. entrants (spring 2018-19), dissipative phenomena in the buckling of thin films on compliant substrates, 17 december, 2018, dynamical processes & phase stability materials under extreme conditions, speaker: dr. maulik patel, 10 december, 2018, fluid mechanics and fluid power (fmfp) conference, dec 10 - 12, 2018.

Undergraduate Academics

Ph.D. Academics

M.Tech. Academics

Outreach Programs

Research Areas

Department of mechanical engineering.

The Department of Mechanical Engineering is one of the largest departments in the Institute, with 62 full-time faculty members and over 50 full-time administrative and technical support staff.

Department of Mechanical Engineering Indian Institute of Technology Bombay, Powai, Mumbai 400 076, Maharashtra, India.

Phone: (+91) 22 - 2576 7501/02/03

Fax: (+91) 22 - 2572 6875

office.me[at]iitb.ac.in

Webmaster: webmaster.me[at]iitb.ac.in

• Mechanical, Materials, and Aerospace Engineering

Our mechanical, materials, and aerospace engineering (MMAE) faculty conduct cutting-edge research with real-world applications, which provides countless opportunities for students to participate in breakthrough research, including Armour's R&D Program  and Summer Engineering Research Immersion Program. 

Students gain hands-on experience working closely with our faculty in such areas of expertise as autonomous systems, design and manufacturing, energy storage and conversion, materials science and engineering, solid mechanics and structures, and thermal sciences. 

Learn more...

• Digitization of PhD Theses
• ACL Members
• General Rules
• Service Hours
• Layout Floor Plan
• Internal Website
• Remote Access
• IITD Roundcube Email
• IITD Squirrelmail Email
• Online Book Recommendation System (New)
• LMS Login (Staff)
• Duty Roster
• Major Duties, Sections and Inchargeship
• Bindery Service
• Inter Library Loan
• Photocopy Service
• Reference Services
• Research Support Services and Outreach Programs

Research Publications

Yearwise publications of iit delhi covered in scopus and web of science citation databases, (as on 01/08/2024).

For any query in this regard, please contact Computer Applications Division (CAD), Central Library, IIT Delhi

Research Publication Archive

Copyright © 2021 Central Library, Indian Institute of Technology Delhi. All Rights Reserved.         Developed by Mr. Satbir Chauhan  under the Guidance  CAD Central Library

Recent Advances in Mechanical Engineering

Select Proceedings of ICRAMERD 2022

• Conference proceedings
• © 2023
• Sasmeeta Tripathy 0 ,
• Sikata Samantaray 1 ,
• J. Ramkumar 2 ,
• S. S. Mahapatra 3

Department of Mechanical Engineering, Siksha ‘O’ Anusandhan, Bhubaneswar, India

You can also search for this editor in PubMed   Google Scholar

Department of Mechanical Engineering, Indian Institute of Technology, Kanpur, India

Department of mechanical engineering, national institute of technology, rourkela, india.

• Presents state-of-art practices and strategies in understanding and executing digital enterprise
• Brings together the mathematical analyses and algorithms along with theoretical models made by many top scholars
• Showcases the power of smart manufacturing, advanced manufacturing processes and technologies

Part of the book series: Lecture Notes in Mechanical Engineering (LNME)

Included in the following conference series:

• ICRAMERD: International Conference on Recent Advances in Mechanical Engineering Research and Development

Conference proceedings info: ICRAMERD 2022.

10k Accesses

18 Citations

1 Altmetric

This is a preview of subscription content, log in via an institution to check access.

Access this book

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as EPUB and PDF
• Read on any device
• Instant download
• Own it forever
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Other ways to access

Licence this eBook for your library

Institutional subscriptions

About this book

• Product design and development
• Advances in machining technology
• Computational Techniques in heat and fluid flow
• Manufacturing process planning and scheduling
• Design and simulation of smart vehicles

Table of contents (58 papers)

Front matter, heat transfer and fluid flow, performance of a single-turn pulsating heat pipe at varying gravity.

• K. Satyanarayana, N. V. S. M. Reddy, P. Rosang

Free Convection from Isothermally Heated Hollow Tube with Annular Fins

• Vakacharla Bharat Kumar, Basanta Kumar Rana, Swarup Kumar Nayak

Chaotic Dynamics of Fluid Conveying Pipe

• Shashendra Kumar Sahoo, Bamadev Sahoo, Lokanath Panda, Dhirendra NathThatoi

Study of Flow Distribution in the Falling Film Evaporator Manifold

• Pankaj G. Anjankar, Sanjay S. Lakade, Atul Padalkar, Sandeep Nichal

Effect of Core Geometrical Characteristics on Performance and Pressure Drop of Rotary Regenerator

• Manas Ranjan Padhi, Prakash Ghose, Achinta Sarkar, Basanta Kumar Rana, Manoj Ukamanal, Jitendra Kumar Patel et al.

CFD Analysis of Heat Transfer Coefficient and Pressure Drop in a Shell and Tube Heat Exchanger for Various Baffle Angles

• R. Anandan, G. Sivaraman, M. Rajasankar, R. Girimurugan

A Study on Indoor Air Quality of Air-Conditioning System Using Duct Insulation and Filters for Industrial Applications

• Amit Kumar Behera, Debasmita Mishra

Optimization Applications in Engine

Maximization of compressive strength of fused deposition modeled antibacterial polylactic acid by taguchi method.

• M. Ajay kumar, Dipabrata Banerjee, Swayam Bikash Mishra, Basanta Kumar Nanda, Santhosh Kumar Nayak

Analysis of Drivers and Barriers in Green Supply Chain Management Using Fuzzy AHP and Fuzzy TOPSIS Approach

• Soumya Ranjan Pradhan, Siba Sankar Mahapatra

Parametric Optimization of LPG Refrigeration System Using Artificial Bee Colony Algorithm

• Sampath Boopathi, M. Sureshkumar, S. Sathiskumar

A Generalized Oppositional Differential Evolution Algorithm for Parameter Extraction of Different Photovoltaic Models

• Shubhranshu Mohan Parida, Pravat Kumar Rout

Analysis of Community Engagement on Social Networking Sites During the Kerala Floods in 2018

• Sumit Kumar, Arun Thomas, Vinay V. Panicker

Application of Evolutionary Technique for Mapping onto Network on Chip

• Subhashree Choudhury, A. S. Das, Sarita Misra, Ismail Hossain, Taraprasanna Dash, Kaliprasanna Swain

Parametric Optimization of Resistance Spot Welded Dissimilar Metals Utilizing Advanced Hybrid Taguchi-MARCOS Method

• Bhabani Shankar Kamilla, Bibhuti Bhusan Sahoo, Abhishek Barua, Siddharth Jeet, Kanchan Kumari, Dilip Kumar Bagal et al.

Prioritizing the Factors Affect in Covid-19 Vaccines, a Fuzzy-AHP Approach

• Anil Kumar Das, Sumit Ray, Amit Kumar Sahoo, Priyabrata Mohapatra, Bharat Chandra Routara

Apriori Versus FP-Growth for Recommendation System

• U. Sarath, Nima S. Nair

Optimization of EDM Process Parameters in Machining of Titanium Alloy Used for Aerospace Applications

• K. K. Mahapatra, S. Biswal, S. Tripathy, D. N. Thatoi, P. Satapathy

Other volumes

Recent advancements in mechanical engineering, editors and affiliations.

Sasmeeta Tripathy, Sikata Samantaray

J. Ramkumar

S. S. Mahapatra

About the editors

Bibliographic information.

Book Title : Recent Advances in Mechanical Engineering

Book Subtitle : Select Proceedings of ICRAMERD 2022

Editors : Sasmeeta Tripathy, Sikata Samantaray, J. Ramkumar, S. S. Mahapatra

Series Title : Lecture Notes in Mechanical Engineering

DOI : https://doi.org/10.1007/978-981-19-9493-7

Publisher : Springer Singapore

eBook Packages : Engineering , Engineering (R0)

Copyright Information : The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2023

Softcover ISBN : 978-981-19-9492-0 Published: 31 May 2023

eBook ISBN : 978-981-19-9493-7 Published: 30 May 2023

Series ISSN : 2195-4356

Series E-ISSN : 2195-4364

Edition Number : 1

Number of Pages : XVI, 628

Number of Illustrations : 60 b/w illustrations, 293 illustrations in colour

Topics : Industrial and Production Engineering , Engineering Design , Materials Engineering

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• Galvin Library

Mechanical Engineering

• Codes & Standards
• Getting Started
• Research Papers & Journal Articles
• Data & Properties

Finding Codes and Standards in Mechanical Engineering

Alphabetical listing.

• Product Information
• Resources for Alumni & Others
• Search Tips and Tricks for Reserch Databases
• Research Misconduct
• More Information

Mechanical Engineering Librarian

Aric Ahrens

Email: [email protected] Introductory Video My Subject Areas

Related Subjects

• Aerospace Engineering
• Manufacturing Engineering
• Materials Science & Engineering

Standards are formally published documents that establish consistent technical requirements for products, practices, methods, or operations, thereby ensuring uniformity, quality, and safety. By themselves, standards are not legally enforceable in most cases. When standards are incorporated into a legally enforceable contract, or enacted into a law or regulation by government, they are generally referred to as codes.

• << Previous: Data & Properties
• Next: Product Information >>
• Last Updated: Jul 30, 2024 3:06 PM
• URL: https://guides.library.iit.edu/mechanicalengineering

Ranking the Best IITs for Mechanical Engineering

• Mechanical Engineering

In India, the top engineering schools are the Indian Institutes of Technology (IITs). Known for tough courses and successful graduates, these schools are where many students want to study Mechanical Engineering. This subject is popular because it combines old-school engineering with new technology.

We’ve ranked the best IITs for this field by looking at their reputation, research, ties with companies, successful former students, and facilities.

IIT Bombay is at the top of the list, with IIT Madras and IIT Delhi not far behind because of their high-quality programs.

IIT Kanpur and IIT Kharagpur are also doing well, getting better and better at teaching Mechanical Engineering.

Methodology Behind the Rankings

The methodology’s foundation for ranking the IITs in Mechanical Engineering involves a multifaceted approach that includes academic reputation, research output, industry interface, and alumni success.

Academic reputation is assessed through surveys of academic peers, gauging perceptions of program rigor and faculty distinction.

Research output is quantified by examining scholarly publications and citations, reflecting the institution’s contribution to advancing the field.

Industry interface evaluates the engagement between the IITs and the mechanical engineering sector, considering collaborative projects, internships, and job placements.

Alumni success is tracked through the career trajectories and achievements of graduates, serving as a testament to the quality of education and training provided.

This comprehensive evaluation ensures a balanced and empirical basis for ranking, emphasizing the elements that directly impact the development and dissemination of mechanical engineering knowledge and practice.

Top Performer: IIT Bombay

IIT Bombay stands out as a top institution for mechanical engineering in India. It offers excellent education, innovative research, and strong ties to the industry.

The college creates an environment where students and teachers can think creatively and critically. The courses are carefully designed to include basic engineering concepts and the latest technology. The faculty at IIT Bombay’s Mechanical Engineering Department are well-respected and contribute significantly to their fields.

The research facilities at the institute are advanced, allowing students to work on groundbreaking projects that connect classroom learning with real-world practice. IIT Bombay also works closely with industry leaders, which gives students a chance to face actual business challenges.

This means that when students graduate, they have both academic knowledge and practical skills that are in demand by employers.

Runner-Up: IIT Madras

IIT Madras stands out as one of the top choices for studying mechanical engineering in India. The courses there are carefully planned to mix book learning with real-world practice, and they always include new technologies and what the industry needs. At IIT Madras, the teachers are some of the best in their fields, doing important research, which makes for a learning environment that pushes students to think deeply and come up with new ideas.

Students get to work in advanced labs and use research facilities that help them understand the details of mechanical engineering. Also, IIT Madras has a proven track record of its students getting good jobs and has built strong relationships with businesses. This means when students finish their studies, they are ready to do well in their jobs and have successful careers.

For example, a student graduating from IIT Madras might work on developing the next generation of robots, or they could join a company that’s leading the way in sustainable energy. These opportunities are partly because of the school’s focus on making sure students get the kind of education that today’s employers are looking for.

Noteworthy Contender: IIT Delhi

Following IIT Madras, IIT Delhi emerges as a formidable contender in mechanical engineering education with its robust curriculum and state-of-the-art research facilities. The institution’s mechanical engineering department is distinguished by its commitment to academic excellence and a strong emphasis on interdisciplinary research.

IIT Delhi’s pedagogical approach is designed to foster critical thinking, innovation, and practical problem-solving skills, which are reinforced through rigorous coursework and a multitude of industry-oriented projects.

Analytically, IIT Delhi’s mechanical engineering program stands out for its extensive research contributions and consistently high placement rates. Scholarly endeavors are supported by advanced laboratories and centers of excellence that facilitate cutting-edge research in fields such as robotics, thermodynamics, and materials science.

This integrative educational environment positions IIT Delhi as an authoritative institution in shaping proficient mechanical engineers ready to address global technological challenges.

Emerging Leaders: IIT Kanpur and IIT Kharagpur

IIT Kanpur and IIT Kharagpur are leading the way in mechanical engineering with their innovative courses and top-notch research. They stand out because they encourage new research and teach students to solve real-world problems.

For example, IIT Kanpur has a strong mechanical engineering department that focuses on working across different subjects. They are making great strides in areas like robotics, material sciences, and creating new energy solutions.

IIT Kharagpur is also doing amazing work. They teach students everything they need to know about mechanical systems, combining classroom learning with practical projects that are relevant to the industry.

Both institutes are known for their groundbreaking research and have strong partnerships with other top universities and companies worldwide. This shows their commitment to shaping the future of mechanical engineering.

Let’s take a look at the top Indian Institutes of Technology (IITs) for studying mechanical engineering. This ranking is based on several important factors such as academic results, the quality of facilities, how knowledgeable the professors are, and how well these institutions work with the industry.

IIT Bombay stands out at the top. It’s the best choice because of its excellent education and strong ties with companies.

IIT Madras and IIT Delhi are also great choices – they’re right up there with the best, offering top-notch education and opportunities.

IIT Kanpur and IIT Kharagpur are moving up quickly, showing a lot of promise for the future.

These rankings are really useful for students who are trying to decide where to study and for teachers looking for the best places to work.

Related Posts

Exploring the Intersection of Marine and Mechanical Engineering

Job Openings in Fluid Mechanics Engineering

Harnessing Energy Through Mechanical Engineering Innovations

The Daily Responsibilities of a Mechanical Engineer

Advancing Your Skills With Short Courses in Mechanical Engineering

Choosing the Best Specialization in Mechanical Engineering

Abhijit Sarkar

Advaith Sankar

Amitava Ghosh

Anand Krishnasamy

Anuj K. Tiwari

Arunachalam, N.

Arunn Narasimhan

Arvind Pattamatta

Ashis Kumar Sen

Babu Viswanathan

Balaji Srinivasan

Chakravarthy Balaji

Chandramouli, P.

Charchit Kumar

Deepak Bansal, Rear Admiral (Retd)

Dhiman Chatterjee

G. Venkatarathnam

Gnanamoorthy, R.

Hariharan, K

Kameswararao Anupindi

Krishna Kannan

Krishnan Balasubramanian

Krithika Narayanaswamy

Maiya, M. P.

Mallikarjuna, J. M.

Manish Anand

Manivannan, P. V.

Manoj Pandey

Mayank Mittal

Narasimhan Swaminathan

Pallab Sinha Mahapatra

Parag Ravindran

Piyush Shakya

Prabhu Rajagopal

Raghavan, V.

Raghu V Prakash

Raju Sethuraman

Ramesh Babu, N.

Ramkumar, P.

Ratna Kumar Annabattula

Raushan Singh

Samuel, G. L.

Sarit Kumar Das

Sateesh Gedupudi

Sathyan Subbiah

Seshadri Sekhar, A.

Shaligram Tiwari

Shamit Bakshi

Shankar Krishnapillai

Shyama Prasad Das

Sivasrinivasu Devadula

Somashekhar S. Hiremath

Sourav Rakshit

Srikrishna Sahu

Srinivasa Reddy, K.

Srinivasan, K.

Sujatha Srinivasan

Sundararajan Natarajan

Sushanta Kumar Panigrahi

Varunkumar, S.

VENKITAKRISHNAN, P. V.

Vimal Edachery

Vishal Nandigana

Viswanath, K.

• Faculty Members
• Office/Lab. Incharge
• Laboratories
• Checkmail Roundcude
• Checkmail Squirrelmail
• Internal Web
• Mechanical Engineering Society
• GPS Mechanical Department
• List of Awards, Honors & Medals
• Undergraduate
• Postgraduate
• Broad Areas
• Publications
• Consultancy
• Research Projects
• MI Projects
• Research highlights
• Significant research
• Business Incubation Activities
• Internaltional Collaborations

M. S. Research

Master of Science (Research) Programme The M.S. (Research) programme comprises of 20 credits of course work (minor project is not allowed) and 40 credits of research work. The larger project component gives the student an opportunity to conduct in-depth investigation on a topic of his/her interest.

The project will be monitored by the Student Research Committee (SRC) and the student will have to register for thesis (project course no. MED895) for 40 credits. An 'X' grade is awarded at the end of each semester until the project work gets completed and the thesis is written. Nominally the M.S.(R) programme is expected to take 4 semesters (excluding summer).

Upon completion of project work, a thesis is written that is evaluated by one internal and one external examiner. Upon satisfactory recommendations from the examiners, the thesis defence can be conducted before a committee

• Academic Programmes
• Faculty Recruitment
• Project Staff
• T & P (for IIT)
• PhD defended during current academic year
• PhD Degree Awarded
• Mechanical Library

ME Newsletter