can you prove an alternative hypothesis

Have a thesis expert improve your writing

Check your thesis for plagiarism in 10 minutes, generate your apa citations for free.

• Knowledge Base
• Null and Alternative Hypotheses | Definitions & Examples

Null and Alternative Hypotheses | Definitions & Examples

Published on 5 October 2022 by Shaun Turney . Revised on 6 December 2022.

The null and alternative hypotheses are two competing claims that researchers weigh evidence for and against using a statistical test :

• Null hypothesis (H 0 ): There’s no effect in the population .
• Alternative hypothesis (H A ): There’s an effect in the population.

The effect is usually the effect of the independent variable on the dependent variable .

Table of contents

Answering your research question with hypotheses, what is a null hypothesis, what is an alternative hypothesis, differences between null and alternative hypotheses, how to write null and alternative hypotheses, frequently asked questions about null and alternative hypotheses.

The null and alternative hypotheses offer competing answers to your research question . When the research question asks “Does the independent variable affect the dependent variable?”, the null hypothesis (H 0 ) answers “No, there’s no effect in the population.” On the other hand, the alternative hypothesis (H A ) answers “Yes, there is an effect in the population.”

The null and alternative are always claims about the population. That’s because the goal of hypothesis testing is to make inferences about a population based on a sample . Often, we infer whether there’s an effect in the population by looking at differences between groups or relationships between variables in the sample.

You can use a statistical test to decide whether the evidence favors the null or alternative hypothesis. Each type of statistical test comes with a specific way of phrasing the null and alternative hypothesis. However, the hypotheses can also be phrased in a general way that applies to any test.

The null hypothesis is the claim that there’s no effect in the population.

If the sample provides enough evidence against the claim that there’s no effect in the population ( p ≤ α), then we can reject the null hypothesis . Otherwise, we fail to reject the null hypothesis.

Although “fail to reject” may sound awkward, it’s the only wording that statisticians accept. Be careful not to say you “prove” or “accept” the null hypothesis.

Null hypotheses often include phrases such as “no effect”, “no difference”, or “no relationship”. When written in mathematical terms, they always include an equality (usually =, but sometimes ≥ or ≤).

Examples of null hypotheses

The table below gives examples of research questions and null hypotheses. There’s always more than one way to answer a research question, but these null hypotheses can help you get started.

*Note that some researchers prefer to always write the null hypothesis in terms of “no effect” and “=”. It would be fine to say that daily meditation has no effect on the incidence of depression and p 1 = p 2 .

The alternative hypothesis (H A ) is the other answer to your research question . It claims that there’s an effect in the population.

Often, your alternative hypothesis is the same as your research hypothesis. In other words, it’s the claim that you expect or hope will be true.

The alternative hypothesis is the complement to the null hypothesis. Null and alternative hypotheses are exhaustive, meaning that together they cover every possible outcome. They are also mutually exclusive, meaning that only one can be true at a time.

Alternative hypotheses often include phrases such as “an effect”, “a difference”, or “a relationship”. When alternative hypotheses are written in mathematical terms, they always include an inequality (usually ≠, but sometimes > or <). As with null hypotheses, there are many acceptable ways to phrase an alternative hypothesis.

Examples of alternative hypotheses

The table below gives examples of research questions and alternative hypotheses to help you get started with formulating your own.

Null and alternative hypotheses are similar in some ways:

• They’re both answers to the research question
• They both make claims about the population
• They’re both evaluated by statistical tests.

However, there are important differences between the two types of hypotheses, summarized in the following table.

To help you write your hypotheses, you can use the template sentences below. If you know which statistical test you’re going to use, you can use the test-specific template sentences. Otherwise, you can use the general template sentences.

The only thing you need to know to use these general template sentences are your dependent and independent variables. To write your research question, null hypothesis, and alternative hypothesis, fill in the following sentences with your variables:

Does independent variable affect dependent variable ?

• Null hypothesis (H 0 ): Independent variable does not affect dependent variable .
• Alternative hypothesis (H A ): Independent variable affects dependent variable .

Test-specific

Once you know the statistical test you’ll be using, you can write your hypotheses in a more precise and mathematical way specific to the test you chose. The table below provides template sentences for common statistical tests.

Note: The template sentences above assume that you’re performing one-tailed tests . One-tailed tests are appropriate for most studies.

The null hypothesis is often abbreviated as H 0 . When the null hypothesis is written using mathematical symbols, it always includes an equality symbol (usually =, but sometimes ≥ or ≤).

The alternative hypothesis is often abbreviated as H a or H 1 . When the alternative hypothesis is written using mathematical symbols, it always includes an inequality symbol (usually ≠, but sometimes < or >).

A research hypothesis is your proposed answer to your research question. The research hypothesis usually includes an explanation (‘ x affects y because …’).

A statistical hypothesis, on the other hand, is a mathematical statement about a population parameter. Statistical hypotheses always come in pairs: the null and alternative hypotheses. In a well-designed study , the statistical hypotheses correspond logically to the research hypothesis.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Turney, S. (2022, December 06). Null and Alternative Hypotheses | Definitions & Examples. Scribbr. Retrieved 24 June 2024, from https://www.scribbr.co.uk/stats/null-and-alternative-hypothesis/

Is this article helpful?

Shaun Turney

Other students also liked, levels of measurement: nominal, ordinal, interval, ratio, the standard normal distribution | calculator, examples & uses, types of variables in research | definitions & examples.

9.1 Null and Alternative Hypotheses

The actual test begins by considering two hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 , the — null hypothesis: a statement of no difference between sample means or proportions or no difference between a sample mean or proportion and a population mean or proportion. In other words, the difference equals 0.

H a —, the alternative hypothesis: a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.

After you have determined which hypothesis the sample supports, you make a decision. There are two options for a decision. They are reject H 0 if the sample information favors the alternative hypothesis or do not reject H 0 or decline to reject H 0 if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

Example 9.1

H 0 : No more than 30 percent of the registered voters in Santa Clara County voted in the primary election. p ≤ 30 H a : More than 30 percent of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25 percent. State the null and alternative hypotheses.

Example 9.2

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are the following: H 0 : μ = 2.0 H a : μ ≠ 2.0

We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : μ __ 66
• H a : μ __ 66

Example 9.3

We want to test if college students take fewer than five years to graduate from college, on the average. The null and alternative hypotheses are the following: H 0 : μ ≥ 5 H a : μ < 5

We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : μ __ 45
• H a : μ __ 45

Example 9.4

An article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third of the students pass. The same article stated that 6.6 percent of U.S. students take advanced placement exams and 4.4 percent pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6 percent. State the null and alternative hypotheses. H 0 : p ≤ 0.066 H a : p > 0.066

On a state driver’s test, about 40 percent pass the test on the first try. We want to test if more than 40 percent pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : p __ 0.40
• H a : p __ 0.40

Collaborative Exercise

Bring to class a newspaper, some news magazines, and some internet articles. In groups, find articles from which your group can write null and alternative hypotheses. Discuss your hypotheses with the rest of the class.

As an Amazon Associate we earn from qualifying purchases.

This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's permission.

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute Texas Education Agency (TEA). The original material is available at: https://www.texasgateway.org/book/tea-statistics . Changes were made to the original material, including updates to art, structure, and other content updates.

Access for free at https://openstax.org/books/statistics/pages/1-introduction

• Authors: Barbara Illowsky, Susan Dean
• Publisher/website: OpenStax
• Book title: Statistics
• Publication date: Mar 27, 2020
• Location: Houston, Texas
• Book URL: https://openstax.org/books/statistics/pages/1-introduction
• Section URL: https://openstax.org/books/statistics/pages/9-1-null-and-alternative-hypotheses

© Jan 23, 2024 Texas Education Agency (TEA). The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.

What is an Alternative Hypothesis in Statistics?

Often in statistics we want to test whether or not some assumption is true about a population parameter .

For example, we might assume that the mean weight of a certain population of turtle is 300 pounds.

To determine if this assumption is true, we’ll go out and collect a sample of turtles and weigh each of them. Using this sample data, we’ll conduct a hypothesis test .

The first step in a hypothesis test is to define the  null and  alternative hypotheses .

These two hypotheses need to be mutually exclusive, so if one is true then the other must be false.

These two hypotheses are defined as follows:

Null hypothesis (H 0 ): The sample data is consistent with the prevailing belief about the population parameter.

Alternative hypothesis (H A ): The sample data suggests that the assumption made in the null hypothesis is not true. In other words, there is some non-random cause influencing the data.

Types of Alternative Hypotheses

There are two types of alternative hypotheses:

A  one-tailed hypothesis involves making a “greater than” or “less than ” statement. For example, suppose we assume the mean height of a male in the U.S. is greater than or equal to 70 inches.

The null and alternative hypotheses in this case would be:

• Null hypothesis: µ ≥ 70 inches
• Alternative hypothesis: µ < 70 inches

A  two-tailed hypothesis involves making an “equal to” or “not equal to” statement. For example, suppose we assume the mean height of a male in the U.S. is equal to 70 inches.

• Null hypothesis: µ = 70 inches
• Alternative hypothesis: µ ≠ 70 inches

Note: The “equal” sign is always included in the null hypothesis, whether it is =, ≥, or ≤.

Examples of Alternative Hypotheses

The following examples illustrate how to define the null and alternative hypotheses for different research problems.

Example 1: A biologist wants to test if the mean weight of a certain population of turtle is different from the widely-accepted mean weight of 300 pounds.

The null and alternative hypothesis for this research study would be:

• Null hypothesis: µ = 300 pounds
• Alternative hypothesis: µ ≠ 300 pounds

If we reject the null hypothesis, this means we have sufficient evidence from the sample data to say that the true mean weight of this population of turtles is different from 300 pounds.

Example 2: An engineer wants to test whether a new battery can produce higher mean watts than the current industry standard of 50 watts.

• Null hypothesis: µ ≤ 50 watts
• Alternative hypothesis: µ > 50 watts

If we reject the null hypothesis, this means we have sufficient evidence from the sample data to say that the true mean watts produced by the new battery is greater than the current industry standard of 50 watts.

Example 3: A botanist wants to know if a new gardening method produces less waste than the standard gardening method that produces 20 pounds of waste.

• Null hypothesis: µ ≥ 20 pounds
• Alternative hypothesis: µ < 20 pounds

If we reject the null hypothesis, this means we have sufficient evidence from the sample data to say that the true mean weight produced by this new gardening method is less than 20 pounds.

When to Reject the Null Hypothesis

Whenever we conduct a hypothesis test, we use sample data to calculate a test-statistic and a corresponding p-value.

If the p-value is less than some significance level (common choices are 0.10, 0.05, and 0.01), then we reject the null hypothesis.

This means we have sufficient evidence from the sample data to say that the assumption made by the null hypothesis is not true.

If the p-value is  not less than some significance level, then we fail to reject the null hypothesis.

This means our sample data did not provide us with evidence that the assumption made by the null hypothesis was not true.

Additional Resource:   An Explanation of P-Values and Statistical Significance

Featured Posts

Hey there. My name is Zach Bobbitt. I have a Masters of Science degree in Applied Statistics and I’ve worked on machine learning algorithms for professional businesses in both healthcare and retail. I’m passionate about statistics, machine learning, and data visualization and I created Statology to be a resource for both students and teachers alike.  My goal with this site is to help you learn statistics through using simple terms, plenty of real-world examples, and helpful illustrations.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Join the Statology Community

Sign up to receive Statology's exclusive study resource: 100 practice problems with step-by-step solutions. Plus, get our latest insights, tutorials, and data analysis tips straight to your inbox!

By subscribing you accept Statology's Privacy Policy.

Hypothesis Testing (cont...)

Hypothesis testing, the null and alternative hypothesis.

In order to undertake hypothesis testing you need to express your research hypothesis as a null and alternative hypothesis. The null hypothesis and alternative hypothesis are statements regarding the differences or effects that occur in the population. You will use your sample to test which statement (i.e., the null hypothesis or alternative hypothesis) is most likely (although technically, you test the evidence against the null hypothesis). So, with respect to our teaching example, the null and alternative hypothesis will reflect statements about all statistics students on graduate management courses.

The null hypothesis is essentially the "devil's advocate" position. That is, it assumes that whatever you are trying to prove did not happen ( hint: it usually states that something equals zero). For example, the two different teaching methods did not result in different exam performances (i.e., zero difference). Another example might be that there is no relationship between anxiety and athletic performance (i.e., the slope is zero). The alternative hypothesis states the opposite and is usually the hypothesis you are trying to prove (e.g., the two different teaching methods did result in different exam performances). Initially, you can state these hypotheses in more general terms (e.g., using terms like "effect", "relationship", etc.), as shown below for the teaching methods example:

Depending on how you want to "summarize" the exam performances will determine how you might want to write a more specific null and alternative hypothesis. For example, you could compare the mean exam performance of each group (i.e., the "seminar" group and the "lectures-only" group). This is what we will demonstrate here, but other options include comparing the distributions , medians , amongst other things. As such, we can state:

Now that you have identified the null and alternative hypotheses, you need to find evidence and develop a strategy for declaring your "support" for either the null or alternative hypothesis. We can do this using some statistical theory and some arbitrary cut-off points. Both these issues are dealt with next.

Significance levels

The level of statistical significance is often expressed as the so-called p -value . Depending on the statistical test you have chosen, you will calculate a probability (i.e., the p -value) of observing your sample results (or more extreme) given that the null hypothesis is true . Another way of phrasing this is to consider the probability that a difference in a mean score (or other statistic) could have arisen based on the assumption that there really is no difference. Let us consider this statement with respect to our example where we are interested in the difference in mean exam performance between two different teaching methods. If there really is no difference between the two teaching methods in the population (i.e., given that the null hypothesis is true), how likely would it be to see a difference in the mean exam performance between the two teaching methods as large as (or larger than) that which has been observed in your sample?

So, you might get a p -value such as 0.03 (i.e., p = .03). This means that there is a 3% chance of finding a difference as large as (or larger than) the one in your study given that the null hypothesis is true. However, you want to know whether this is "statistically significant". Typically, if there was a 5% or less chance (5 times in 100 or less) that the difference in the mean exam performance between the two teaching methods (or whatever statistic you are using) is as different as observed given the null hypothesis is true, you would reject the null hypothesis and accept the alternative hypothesis. Alternately, if the chance was greater than 5% (5 times in 100 or more), you would fail to reject the null hypothesis and would not accept the alternative hypothesis. As such, in this example where p = .03, we would reject the null hypothesis and accept the alternative hypothesis. We reject it because at a significance level of 0.03 (i.e., less than a 5% chance), the result we obtained could happen too frequently for us to be confident that it was the two teaching methods that had an effect on exam performance.

Whilst there is relatively little justification why a significance level of 0.05 is used rather than 0.01 or 0.10, for example, it is widely used in academic research. However, if you want to be particularly confident in your results, you can set a more stringent level of 0.01 (a 1% chance or less; 1 in 100 chance or less).

One- and two-tailed predictions

When considering whether we reject the null hypothesis and accept the alternative hypothesis, we need to consider the direction of the alternative hypothesis statement. For example, the alternative hypothesis that was stated earlier is:

The alternative hypothesis tells us two things. First, what predictions did we make about the effect of the independent variable(s) on the dependent variable(s)? Second, what was the predicted direction of this effect? Let's use our example to highlight these two points.

Sarah predicted that her teaching method (independent variable: teaching method), whereby she not only required her students to attend lectures, but also seminars, would have a positive effect (that is, increased) students' performance (dependent variable: exam marks). If an alternative hypothesis has a direction (and this is how you want to test it), the hypothesis is one-tailed. That is, it predicts direction of the effect. If the alternative hypothesis has stated that the effect was expected to be negative, this is also a one-tailed hypothesis.

Alternatively, a two-tailed prediction means that we do not make a choice over the direction that the effect of the experiment takes. Rather, it simply implies that the effect could be negative or positive. If Sarah had made a two-tailed prediction, the alternative hypothesis might have been:

In other words, we simply take out the word "positive", which implies the direction of our effect. In our example, making a two-tailed prediction may seem strange. After all, it would be logical to expect that "extra" tuition (going to seminar classes as well as lectures) would either have a positive effect on students' performance or no effect at all, but certainly not a negative effect. However, this is just our opinion (and hope) and certainly does not mean that we will get the effect we expect. Generally speaking, making a one-tail prediction (i.e., and testing for it this way) is frowned upon as it usually reflects the hope of a researcher rather than any certainty that it will happen. Notable exceptions to this rule are when there is only one possible way in which a change could occur. This can happen, for example, when biological activity/presence in measured. That is, a protein might be "dormant" and the stimulus you are using can only possibly "wake it up" (i.e., it cannot possibly reduce the activity of a "dormant" protein). In addition, for some statistical tests, one-tailed tests are not possible.

Rejecting or failing to reject the null hypothesis

Let's return finally to the question of whether we reject or fail to reject the null hypothesis.

If our statistical analysis shows that the significance level is below the cut-off value we have set (e.g., either 0.05 or 0.01), we reject the null hypothesis and accept the alternative hypothesis. Alternatively, if the significance level is above the cut-off value, we fail to reject the null hypothesis and cannot accept the alternative hypothesis. You should note that you cannot accept the null hypothesis, but only find evidence against it.

If you're seeing this message, it means we're having trouble loading external resources on our website.

If you're behind a web filter, please make sure that the domains *.kastatic.org and *.kasandbox.org are unblocked.

To log in and use all the features of Khan Academy, please enable JavaScript in your browser.

AP®︎/College Statistics

Course: ap®︎/college statistics   >   unit 10.

• Idea behind hypothesis testing

Examples of null and alternative hypotheses

• Writing null and alternative hypotheses
• P-values and significance tests
• Comparing P-values to different significance levels
• Estimating a P-value from a simulation
• Estimating P-values from simulations
• Using P-values to make conclusions

Want to join the conversation?

• Upvote Button navigates to signup page
• Downvote Button navigates to signup page
• Flag Button navigates to signup page

Video transcript

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Hypothesis Testing | A Step-by-Step Guide with Easy Examples

Published on November 8, 2019 by Rebecca Bevans . Revised on June 22, 2023.

Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics . It is most often used by scientists to test specific predictions, called hypotheses, that arise from theories.

There are 5 main steps in hypothesis testing:

• State your research hypothesis as a null hypothesis and alternate hypothesis (H o ) and (H a  or H 1 ).
• Collect data in a way designed to test the hypothesis.
• Perform an appropriate statistical test .
• Decide whether to reject or fail to reject your null hypothesis.
• Present the findings in your results and discussion section.

Though the specific details might vary, the procedure you will use when testing a hypothesis will always follow some version of these steps.

Table of contents

Step 1: state your null and alternate hypothesis, step 2: collect data, step 3: perform a statistical test, step 4: decide whether to reject or fail to reject your null hypothesis, step 5: present your findings, other interesting articles, frequently asked questions about hypothesis testing.

After developing your initial research hypothesis (the prediction that you want to investigate), it is important to restate it as a null (H o ) and alternate (H a ) hypothesis so that you can test it mathematically.

The alternate hypothesis is usually your initial hypothesis that predicts a relationship between variables. The null hypothesis is a prediction of no relationship between the variables you are interested in.

• H 0 : Men are, on average, not taller than women. H a : Men are, on average, taller than women.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

For a statistical test to be valid , it is important to perform sampling and collect data in a way that is designed to test your hypothesis. If your data are not representative, then you cannot make statistical inferences about the population you are interested in.

There are a variety of statistical tests available, but they are all based on the comparison of within-group variance (how spread out the data is within a category) versus between-group variance (how different the categories are from one another).

If the between-group variance is large enough that there is little or no overlap between groups, then your statistical test will reflect that by showing a low p -value . This means it is unlikely that the differences between these groups came about by chance.

Alternatively, if there is high within-group variance and low between-group variance, then your statistical test will reflect that with a high p -value. This means it is likely that any difference you measure between groups is due to chance.

Your choice of statistical test will be based on the type of variables and the level of measurement of your collected data .

• an estimate of the difference in average height between the two groups.
• a p -value showing how likely you are to see this difference if the null hypothesis of no difference is true.

Based on the outcome of your statistical test, you will have to decide whether to reject or fail to reject your null hypothesis.

In most cases you will use the p -value generated by your statistical test to guide your decision. And in most cases, your predetermined level of significance for rejecting the null hypothesis will be 0.05 – that is, when there is a less than 5% chance that you would see these results if the null hypothesis were true.

In some cases, researchers choose a more conservative level of significance, such as 0.01 (1%). This minimizes the risk of incorrectly rejecting the null hypothesis ( Type I error ).

Prevent plagiarism. Run a free check.

The results of hypothesis testing will be presented in the results and discussion sections of your research paper , dissertation or thesis .

In the results section you should give a brief summary of the data and a summary of the results of your statistical test (for example, the estimated difference between group means and associated p -value). In the discussion , you can discuss whether your initial hypothesis was supported by your results or not.

In the formal language of hypothesis testing, we talk about rejecting or failing to reject the null hypothesis. You will probably be asked to do this in your statistics assignments.

However, when presenting research results in academic papers we rarely talk this way. Instead, we go back to our alternate hypothesis (in this case, the hypothesis that men are on average taller than women) and state whether the result of our test did or did not support the alternate hypothesis.

If your null hypothesis was rejected, this result is interpreted as “supported the alternate hypothesis.”

These are superficial differences; you can see that they mean the same thing.

You might notice that we don’t say that we reject or fail to reject the alternate hypothesis . This is because hypothesis testing is not designed to prove or disprove anything. It is only designed to test whether a pattern we measure could have arisen spuriously, or by chance.

If we reject the null hypothesis based on our research (i.e., we find that it is unlikely that the pattern arose by chance), then we can say our test lends support to our hypothesis . But if the pattern does not pass our decision rule, meaning that it could have arisen by chance, then we say the test is inconsistent with our hypothesis .

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Descriptive statistics
• Measures of central tendency
• Correlation coefficient

Methodology

• Cluster sampling
• Stratified sampling
• Types of interviews
• Cohort study
• Thematic analysis

Research bias

• Implicit bias
• Cognitive bias
• Survivorship bias
• Availability heuristic
• Nonresponse bias
• Regression to the mean

Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics. It is used by scientists to test specific predictions, called hypotheses , by calculating how likely it is that a pattern or relationship between variables could have arisen by chance.

A hypothesis states your predictions about what your research will find. It is a tentative answer to your research question that has not yet been tested. For some research projects, you might have to write several hypotheses that address different aspects of your research question.

A hypothesis is not just a guess — it should be based on existing theories and knowledge. It also has to be testable, which means you can support or refute it through scientific research methods (such as experiments, observations and statistical analysis of data).

Null and alternative hypotheses are used in statistical hypothesis testing . The null hypothesis of a test always predicts no effect or no relationship between variables, while the alternative hypothesis states your research prediction of an effect or relationship.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Bevans, R. (2023, June 22). Hypothesis Testing | A Step-by-Step Guide with Easy Examples. Scribbr. Retrieved July 1, 2024, from https://www.scribbr.com/statistics/hypothesis-testing/

Is this article helpful?

Rebecca Bevans

Other students also liked, choosing the right statistical test | types & examples, understanding p values | definition and examples, what is your plagiarism score.

Module 9: Hypothesis Testing With One Sample

Null and alternative hypotheses, learning outcomes.

• Describe hypothesis testing in general and in practice

The actual test begins by considering two  hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 : The null hypothesis: It is a statement about the population that either is believed to be true or is used to put forth an argument unless it can be shown to be incorrect beyond a reasonable doubt.

H a : The alternative hypothesis : It is a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.

After you have determined which hypothesis the sample supports, you make adecision. There are two options for a  decision . They are “reject H 0 ” if the sample information favors the alternative hypothesis or “do not reject H 0 ” or “decline to reject H 0 ” if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in  H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers (including one of the co-authors in research work) use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

H 0 : No more than 30% of the registered voters in Santa Clara County voted in the primary election. p ≤ 30

H a : More than 30% of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25%. State the null and alternative hypotheses.

H 0 : The drug reduces cholesterol by 25%. p = 0.25

H a : The drug does not reduce cholesterol by 25%. p ≠ 0.25

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are:

H 0 : μ = 2.0

H a : μ ≠ 2.0

We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : μ __ 66 H a : μ __ 66

• H 0 : μ = 66
• H a : μ ≠ 66

We want to test if college students take less than five years to graduate from college, on the average. The null and alternative hypotheses are:

H 0 : μ ≥ 5

H a : μ < 5

We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : μ __ 45 H a : μ __ 45

• H 0 : μ ≥ 45
• H a : μ < 45

In an issue of U.S. News and World Report , an article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third pass. The same article stated that 6.6% of U.S. students take advanced placement exams and 4.4% pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6%. State the null and alternative hypotheses.

H 0 : p ≤ 0.066

H a : p > 0.066

On a state driver’s test, about 40% pass the test on the first try. We want to test if more than 40% pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : p __ 0.40 H a : p __ 0.40

• H 0 : p = 0.40
• H a : p > 0.40

Concept Review

In a  hypothesis test , sample data is evaluated in order to arrive at a decision about some type of claim. If certain conditions about the sample are satisfied, then the claim can be evaluated for a population. In a hypothesis test, we: Evaluate the null hypothesis , typically denoted with H 0 . The null is not rejected unless the hypothesis test shows otherwise. The null statement must always contain some form of equality (=, ≤ or ≥) Always write the alternative hypothesis , typically denoted with H a or H 1 , using less than, greater than, or not equals symbols, i.e., (≠, >, or <). If we reject the null hypothesis, then we can assume there is enough evidence to support the alternative hypothesis. Never state that a claim is proven true or false. Keep in mind the underlying fact that hypothesis testing is based on probability laws; therefore, we can talk only in terms of non-absolute certainties.

Formula Review

H 0 and H a are contradictory.

• OpenStax, Statistics, Null and Alternative Hypotheses. Provided by : OpenStax. Located at : http://cnx.org/contents/[email protected]:58/Introductory_Statistics . License : CC BY: Attribution
• Introductory Statistics . Authored by : Barbara Illowski, Susan Dean. Provided by : Open Stax. Located at : http://cnx.org/contents/[email protected] . License : CC BY: Attribution . License Terms : Download for free at http://cnx.org/contents/[email protected]
• Simple hypothesis testing | Probability and Statistics | Khan Academy. Authored by : Khan Academy. Located at : https://youtu.be/5D1gV37bKXY . License : All Rights Reserved . License Terms : Standard YouTube License

Reject the Null or Accept the Alternative? Semantics of Statistical Hypothesis Testing

If you are conducting a quantitative study for your dissertation, it is likely you have created a set of hypotheses to accompany your research questions. It is also likely that you have constructed your hypotheses in the “null/alternative” format. In this format, each research question has both a null hypothesis and an alternative hypothesis associated with it.

Let’s say, for example, that you were conducting a study with the following research question: “is there a difference in the IQs of arts majors and science majors?” The null hypothesis would state that there is no difference between the variables that you are testing (e.g., “there is no difference in the IQs of arts majors and science majors”). The alternative hypothesis would state that there is a difference (e.g., “there is a difference in the IQs of arts majors and science majors”). Typically, the researcher constructs these hypotheses with the expectation (based on the literature and theories in their field of study) that their findings will contradict the null hypothesis, and in turn support the alternative hypothesis. For instance, in our IQ example we may expect to see a difference between arts majors and science majors. Generally, it is difficult to justify conducting a study if you have no reason to believe that differences or relationships exist between your variables. Thus, studies are set up to provide evidence that the null hypothesis is “wrong,” and that the alternative hypothesis is “correct.”

Discover How We Assist to Edit Your Dissertation Chapters

Aligning theoretical framework, gathering articles, synthesizing gaps, articulating a clear methodology and data plan, and writing about the theoretical and practical implications of your research are part of our comprehensive dissertation editing services.

• Bring dissertation editing expertise to chapters 1-5 in timely manner.
• Track all changes, then work with you to bring about scholarly writing.
• Ongoing support to address committee feedback, reducing revisions.

Setting up the null and alternative hypotheses is usually a pretty simple task. However, students often run into trouble when they finish their analysis and must present their results using the “null/alternative” language. Confusion may arise over what words to use and how statements should be phrased. For your dissertation, some of this may come down to your reviewers’ preferences. However, below are some basic guidelines you may follow.

First, let’s assume you ran your analysis and your results were significant (e.g., arts majors and science majors had different IQ levels). In this case, it is generally appropriate to say “the null hypothesis was rejected” because you found evidence against the null hypothesis. This statement is often sufficient, but sometimes reviewers want you to go further and also make a statement about the alternative hypothesis. In this case, you could say “the alternative hypothesis was supported.” Personally, I would avoid saying “the alternative hypothesis was accepted ” because this implies that you have proven the alternative hypothesis to be true. Generally, one study cannot “prove” anything, but it can provide evidence for (or against) a hypothesis. Additionally, the concept of challenging or “falsifying” a hypothesis is stronger than “proving” a hypothesis (for more in-depth discussion on this philosophy of science see Popper, 1959). Again, it is worth noting that your reviewers may have different preferences on the exact language to use here.

Now let’s consider the flip side and assume your results were not significant (e.g., there was no significant difference in IQ between arts majors and science majors). Here you could say “the null hypothesis was not rejected” or “failed to reject the null hypothesis” because you did not find evidence against the null hypothesis. You should NOT say “the null hypothesis was accepted .” Your study is not designed to “prove” the null hypothesis (or the alternative hypothesis, for that matter). Rather, your study is designed to challenge or “reject” the null hypothesis. People often compare this idea in statistical hypothesis testing to how verdicts are made in criminal court cases. If the prosecution does not have strong enough evidence that the defendant committed the crime, the defendant is judged as “not guilty” rather than as “innocent.” In other words, the court can provide evidence of guilt, but it cannot prove innocence. In the same way, a statistical test cannot prove the null hypothesis, but it can provide evidence against it. As for the alternative hypothesis, it may be appropriate to say “the alternative hypothesis was not supported” but you should avoid saying “the alternative hypothesis was rejected .” Once again, this is because your study is designed to reject the null hypothesis, not to reject the alternative hypothesis.

These are just some general tips to help guide the writing of your statistical findings. However, always defer to the requirements of your reviewers and your school when in doubt.

Popper, K. (1959). The logic of scientific discovery . London: Hutchinson.

Null Hypothesis and Alternative Hypothesis

• Inferential Statistics
• Statistics Tutorials
• Probability & Games
• Descriptive Statistics
• Applications Of Statistics
• Math Tutorials
• Pre Algebra & Algebra
• Exponential Decay
• Worksheets By Grade
• Ph.D., Mathematics, Purdue University
• M.S., Mathematics, Purdue University
• B.A., Mathematics, Physics, and Chemistry, Anderson University

Hypothesis testing involves the careful construction of two statements: the null hypothesis and the alternative hypothesis. These hypotheses can look very similar but are actually different.

How do we know which hypothesis is the null and which one is the alternative? We will see that there are a few ways to tell the difference.

The Null Hypothesis

The null hypothesis reflects that there will be no observed effect in our experiment. In a mathematical formulation of the null hypothesis, there will typically be an equal sign. This hypothesis is denoted by H 0 .

The null hypothesis is what we attempt to find evidence against in our hypothesis test. We hope to obtain a small enough p-value that it is lower than our level of significance alpha and we are justified in rejecting the null hypothesis. If our p-value is greater than alpha, then we fail to reject the null hypothesis.

If the null hypothesis is not rejected, then we must be careful to say what this means. The thinking on this is similar to a legal verdict. Just because a person has been declared "not guilty", it does not mean that he is innocent. In the same way, just because we failed to reject a null hypothesis it does not mean that the statement is true.

For example, we may want to investigate the claim that despite what convention has told us, the mean adult body temperature is not the accepted value of 98.6 degrees Fahrenheit . The null hypothesis for an experiment to investigate this is “The mean adult body temperature for healthy individuals is 98.6 degrees Fahrenheit.” If we fail to reject the null hypothesis, then our working hypothesis remains that the average adult who is healthy has a temperature of 98.6 degrees. We do not prove that this is true.

If we are studying a new treatment, the null hypothesis is that our treatment will not change our subjects in any meaningful way. In other words, the treatment will not produce any effect in our subjects.

The Alternative Hypothesis

The alternative or experimental hypothesis reflects that there will be an observed effect for our experiment. In a mathematical formulation of the alternative hypothesis, there will typically be an inequality, or not equal to symbol. This hypothesis is denoted by either H a or by H 1 .

The alternative hypothesis is what we are attempting to demonstrate in an indirect way by the use of our hypothesis test. If the null hypothesis is rejected, then we accept the alternative hypothesis. If the null hypothesis is not rejected, then we do not accept the alternative hypothesis. Going back to the above example of mean human body temperature, the alternative hypothesis is “The average adult human body temperature is not 98.6 degrees Fahrenheit.”

If we are studying a new treatment, then the alternative hypothesis is that our treatment does, in fact, change our subjects in a meaningful and measurable way.

The following set of negations may help when you are forming your null and alternative hypotheses. Most technical papers rely on just the first formulation, even though you may see some of the others in a statistics textbook.

• Null hypothesis: “ x is equal to y .” Alternative hypothesis “ x is not equal to y .”
• Null hypothesis: “ x is at least y .” Alternative hypothesis “ x is less than y .”
• Null hypothesis: “ x is at most y .” Alternative hypothesis “ x is greater than y .”
• Null Hypothesis Examples
• An Example of a Hypothesis Test
• Phases of the Bacterial Growth Curve
• Hypothesis Test for the Difference of Two Population Proportions
• What Is a P-Value?
• How to Conduct a Hypothesis Test
• Hypothesis Test Example
• Maslow's Hierarchy of Needs Explained
• Chi-Square Goodness of Fit Test
• What Level of Alpha Determines Statistical Significance?
• How to Do Hypothesis Tests With the Z.TEST Function in Excel
• The Difference Between Type I and Type II Errors in Hypothesis Testing
• Type I and Type II Errors in Statistics
• The Runs Test for Random Sequences
• What 'Fail to Reject' Means in a Hypothesis Test
• What Is the Difference Between Alpha and P-Values?

What is The Null Hypothesis & When Do You Reject The Null Hypothesis

Julia Simkus

Editor at Simply Psychology

BA (Hons) Psychology, Princeton University

Julia Simkus is a graduate of Princeton University with a Bachelor of Arts in Psychology. She is currently studying for a Master's Degree in Counseling for Mental Health and Wellness in September 2023. Julia's research has been published in peer reviewed journals.

Learn about our Editorial Process

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

A null hypothesis is a statistical concept suggesting no significant difference or relationship between measured variables. It’s the default assumption unless empirical evidence proves otherwise.

The null hypothesis states no relationship exists between the two variables being studied (i.e., one variable does not affect the other).

The null hypothesis is the statement that a researcher or an investigator wants to disprove.

Testing the null hypothesis can tell you whether your results are due to the effects of manipulating ​ the dependent variable or due to random chance. 

How to Write a Null Hypothesis

Null hypotheses (H0) start as research questions that the investigator rephrases as statements indicating no effect or relationship between the independent and dependent variables.

It is a default position that your research aims to challenge or confirm.

For example, if studying the impact of exercise on weight loss, your null hypothesis might be:

There is no significant difference in weight loss between individuals who exercise daily and those who do not.

Examples of Null Hypotheses

When Do We Reject The Null Hypothesis? 

We reject the null hypothesis when the data provide strong enough evidence to conclude that it is likely incorrect. This often occurs when the p-value (probability of observing the data given the null hypothesis is true) is below a predetermined significance level.

If the collected data does not meet the expectation of the null hypothesis, a researcher can conclude that the data lacks sufficient evidence to back up the null hypothesis, and thus the null hypothesis is rejected. 

Rejecting the null hypothesis means that a relationship does exist between a set of variables and the effect is statistically significant ( p > 0.05).

If the data collected from the random sample is not statistically significance , then the null hypothesis will be accepted, and the researchers can conclude that there is no relationship between the variables. 

You need to perform a statistical test on your data in order to evaluate how consistent it is with the null hypothesis. A p-value is one statistical measurement used to validate a hypothesis against observed data.

Calculating the p-value is a critical part of null-hypothesis significance testing because it quantifies how strongly the sample data contradicts the null hypothesis.

The level of statistical significance is often expressed as a  p  -value between 0 and 1. The smaller the p-value, the stronger the evidence that you should reject the null hypothesis.

Usually, a researcher uses a confidence level of 95% or 99% (p-value of 0.05 or 0.01) as general guidelines to decide if you should reject or keep the null.

When your p-value is less than or equal to your significance level, you reject the null hypothesis.

In other words, smaller p-values are taken as stronger evidence against the null hypothesis. Conversely, when the p-value is greater than your significance level, you fail to reject the null hypothesis.

In this case, the sample data provides insufficient data to conclude that the effect exists in the population.

Because you can never know with complete certainty whether there is an effect in the population, your inferences about a population will sometimes be incorrect.

When you incorrectly reject the null hypothesis, it’s called a type I error. When you incorrectly fail to reject it, it’s called a type II error.

Why Do We Never Accept The Null Hypothesis?

The reason we do not say “accept the null” is because we are always assuming the null hypothesis is true and then conducting a study to see if there is evidence against it. And, even if we don’t find evidence against it, a null hypothesis is not accepted.

A lack of evidence only means that you haven’t proven that something exists. It does not prove that something doesn’t exist. 

It is risky to conclude that the null hypothesis is true merely because we did not find evidence to reject it. It is always possible that researchers elsewhere have disproved the null hypothesis, so we cannot accept it as true, but instead, we state that we failed to reject the null. 

One can either reject the null hypothesis, or fail to reject it, but can never accept it.

Why Do We Use The Null Hypothesis?

We can never prove with 100% certainty that a hypothesis is true; We can only collect evidence that supports a theory. However, testing a hypothesis can set the stage for rejecting or accepting this hypothesis within a certain confidence level.

The null hypothesis is useful because it can tell us whether the results of our study are due to random chance or the manipulation of a variable (with a certain level of confidence).

A null hypothesis is rejected if the measured data is significantly unlikely to have occurred and a null hypothesis is accepted if the observed outcome is consistent with the position held by the null hypothesis.

Rejecting the null hypothesis sets the stage for further experimentation to see if a relationship between two variables exists. 

Hypothesis testing is a critical part of the scientific method as it helps decide whether the results of a research study support a particular theory about a given population. Hypothesis testing is a systematic way of backing up researchers’ predictions with statistical analysis.

It helps provide sufficient statistical evidence that either favors or rejects a certain hypothesis about the population parameter. 

Purpose of a Null Hypothesis 

• The primary purpose of the null hypothesis is to disprove an assumption. 
• Whether rejected or accepted, the null hypothesis can help further progress a theory in many scientific cases.
• A null hypothesis can be used to ascertain how consistent the outcomes of multiple studies are.

Do you always need both a Null Hypothesis and an Alternative Hypothesis?

The null (H0) and alternative (Ha or H1) hypotheses are two competing claims that describe the effect of the independent variable on the dependent variable. They are mutually exclusive, which means that only one of the two hypotheses can be true. 

While the null hypothesis states that there is no effect in the population, an alternative hypothesis states that there is statistical significance between two variables. 

The goal of hypothesis testing is to make inferences about a population based on a sample. In order to undertake hypothesis testing, you must express your research hypothesis as a null and alternative hypothesis. Both hypotheses are required to cover every possible outcome of the study. 

What is the difference between a null hypothesis and an alternative hypothesis?

The alternative hypothesis is the complement to the null hypothesis. The null hypothesis states that there is no effect or no relationship between variables, while the alternative hypothesis claims that there is an effect or relationship in the population.

It is the claim that you expect or hope will be true. The null hypothesis and the alternative hypothesis are always mutually exclusive, meaning that only one can be true at a time.

What are some problems with the null hypothesis?

One major problem with the null hypothesis is that researchers typically will assume that accepting the null is a failure of the experiment. However, accepting or rejecting any hypothesis is a positive result. Even if the null is not refuted, the researchers will still learn something new.

Why can a null hypothesis not be accepted?

We can either reject or fail to reject a null hypothesis, but never accept it. If your test fails to detect an effect, this is not proof that the effect doesn’t exist. It just means that your sample did not have enough evidence to conclude that it exists.

We can’t accept a null hypothesis because a lack of evidence does not prove something that does not exist. Instead, we fail to reject it.

Failing to reject the null indicates that the sample did not provide sufficient enough evidence to conclude that an effect exists.

If the p-value is greater than the significance level, then you fail to reject the null hypothesis.

Is a null hypothesis directional or non-directional?

A hypothesis test can either contain an alternative directional hypothesis or a non-directional alternative hypothesis. A directional hypothesis is one that contains the less than (“<“) or greater than (“>”) sign.

A nondirectional hypothesis contains the not equal sign (“≠”).  However, a null hypothesis is neither directional nor non-directional.

A null hypothesis is a prediction that there will be no change, relationship, or difference between two variables.

The directional hypothesis or nondirectional hypothesis would then be considered alternative hypotheses to the null hypothesis.

Gill, J. (1999). The insignificance of null hypothesis significance testing.  Political research quarterly ,  52 (3), 647-674.

Krueger, J. (2001). Null hypothesis significance testing: On the survival of a flawed method.  American Psychologist ,  56 (1), 16.

Masson, M. E. (2011). A tutorial on a practical Bayesian alternative to null-hypothesis significance testing.  Behavior research methods ,  43 , 679-690.

Nickerson, R. S. (2000). Null hypothesis significance testing: a review of an old and continuing controversy.  Psychological methods ,  5 (2), 241.

Rozeboom, W. W. (1960). The fallacy of the null-hypothesis significance test.  Psychological bulletin ,  57 (5), 416.

Related Articles

Research Methodology

Mixed Methods Research

Conversation Analysis

Discourse Analysis

Phenomenology In Qualitative Research

Ethnography In Qualitative Research

Narrative Analysis In Qualitative Research

• Skip to secondary menu
• Skip to main content
• Skip to primary sidebar

Statistics By Jim

Making statistics intuitive

Failing to Reject the Null Hypothesis

By Jim Frost 69 Comments

Failing to reject the null hypothesis is an odd way to state that the results of your hypothesis test are not statistically significant. Why the peculiar phrasing? “Fail to reject” sounds like one of those double negatives that writing classes taught you to avoid. What does it mean exactly? There’s an excellent reason for the odd wording!

In this post, learn what it means when you fail to reject the null hypothesis and why that’s the correct wording. While accepting the null hypothesis sounds more straightforward, it is not statistically correct!

Before proceeding, let’s recap some necessary information. In all statistical hypothesis tests, you have the following two hypotheses:

• The null hypothesis states that there is no effect or relationship between the variables.
• The alternative hypothesis states the effect or relationship exists.

We assume that the null hypothesis is correct until we have enough evidence to suggest otherwise.

After you perform a hypothesis test, there are only two possible outcomes.

• When your p-value is greater than your significance level, you fail to reject the null hypothesis. Your results are not significant. You’ll learn more about interpreting this outcome later in this post.

Related posts : Hypothesis Testing Overview and The Null Hypothesis

Why Don’t Statisticians Accept the Null Hypothesis?

To understand why we don’t accept the null, consider the fact that you can’t prove a negative. A lack of evidence only means that you haven’t proven that something exists. It does not prove that something doesn’t exist. It might exist, but your study missed it. That’s a huge difference and it is the reason for the convoluted wording. Let’s look at several analogies.

Species Presumed to be Extinct

Lack of proof doesn’t represent proof that something doesn’t exist!

Criminal Trials

Perhaps the prosecutor conducted a shoddy investigation and missed clues? Or, the defendant successfully covered his tracks? Consequently, the verdict in these cases is “not guilty.” That judgment doesn’t say the defendant is proven innocent, just that there wasn’t enough evidence to move the jury from the default assumption of innocence.

Hypothesis Tests

The hypothesis test assesses the evidence in your sample. If your test fails to detect an effect, it’s not proof that the effect doesn’t exist. It just means your sample contained an insufficient amount of evidence to conclude that it exists. Like the species that were presumed extinct, or the prosecutor who missed clues, the effect might exist in the overall population but not in your particular sample. Consequently, the test results fail to reject the null hypothesis, which is analogous to a “not guilty” verdict in a trial. There just wasn’t enough evidence to move the hypothesis test from the default position that the null is true.

The critical point across these analogies is that a lack of evidence does not prove something does not exist—just that you didn’t find it in your specific investigation. Hence, you never accept the null hypothesis.

Related post : The Significance Level as an Evidentiary Standard

What Does Fail to Reject the Null Hypothesis Mean?

Accepting the null hypothesis would indicate that you’ve proven an effect doesn’t exist. As you’ve seen, that’s not the case at all. You can’t prove a negative! Instead, the strength of your evidence falls short of being able to reject the null. Consequently, we fail to reject it.

Failing to reject the null indicates that our sample did not provide sufficient evidence to conclude that the effect exists. However, at the same time, that lack of evidence doesn’t prove that the effect does not exist. Capturing all that information leads to the convoluted wording!

What are the possible implications of failing to reject the null hypothesis? Let’s work through them.

First, it is possible that the effect truly doesn’t exist in the population, which is why your hypothesis test didn’t detect it in the sample. Makes sense, right? While that is one possibility, it doesn’t end there.

Another possibility is that the effect exists in the population, but the test didn’t detect it for a variety of reasons. These reasons include the following:

• The sample size was too small to detect the effect.
• The variability in the data was too high. The effect exists, but the noise in your data swamped the signal (effect).
• By chance, you collected a fluky sample. When dealing with random samples, chance always plays a role in the results. The luck of the draw might have caused your sample not to reflect an effect that exists in the population.

Notice how studies that collect a small amount of data or low-quality data are likely to miss an effect that exists? These studies had inadequate statistical power to detect the effect. We certainly don’t want to take results from low-quality studies as proof that something doesn’t exist!

However, failing to detect an effect does not necessarily mean a study is low-quality. Random chance in the sampling process can work against even the best research projects!

If you’re learning about hypothesis testing and like the approach I use in my blog, check out my eBook!

Share this:

Reader Interactions

May 8, 2024 at 9:08 am

Thank you very much for explaining the topic. It brings clarity and makes statistics very simple and interesting. Its helping me in the field of Medical Research.

February 26, 2024 at 7:54 pm

Hi Jim, My question is that can I reverse Null hyposthesis and start with Null: µ1 ≠ µ2 ? Then, if I can reject Null, I will end up with µ1=µ2 for mean comparison and this what I am looking for. But isn’t this cheating?

February 26, 2024 at 11:41 pm

That can be done but it requires you to revamp the entire test. Keep in mind that the reason you normally start out with the null equating to no relationship is because the researchers typically want to prove that a relationship or effect exists. This format forces the researchers to collect a substantial amount of high quality data to have a chance at demonstrating that an effect exists. If they collect a small sample and/or poor quality (e.g., noisy or imprecise), then the results default back to the null stating that no effect exists. So, they have to collect good data and work hard to get findings that suggest the effect exists.

There are tests that flip it around as you suggest where the null states that a relationship does exist. For example, researchers perform an equivalency test when they want to show that there is no difference. That the groups are equal. The test is designed such that it requires a good sample size and high quality data to have a chance at proving equivalency. If they have a small sample size and/or poor quality data, the results default back to the groups being unequal, which is not what they want to show.

So, choose the null hypothesis and corresponding analysis based on what you hope to find. Choose the null hypothesis that forces you to work hard to reject it and get the results that you want. It forces you to collect better evidence to make your case and the results default back to what you don’t want if you do a poor job.

I hope that makes sense!

October 13, 2023 at 5:10 am

Really appreciate how you have been able to explain something difficult in very simple terms. Also covering why you can’t accept a null hypothesis – something which I think is frequently missed. Thank you, Jim.

February 22, 2022 at 11:18 am

Hi Jim, I really appreciate your blog, making difficult things sound simple is a great gift.

I have a doubt about the p-value. You said there are two options when it comes to hypothesis tests results . Reject or failing to reject the null, depending on the p-value and your significant level.

But… a P-value of 0,001 means a stronger evidence than a P-value of 0,01? ( both with a significant level of 5%. Or It doesn`t matter, and just every p-Value under your significant level means the same burden of evidence against the null?

I hope I made my point clear. Thanks a lot for your time.

February 23, 2022 at 9:06 pm

There are different schools of thought about this question. The traditional approach is clear cut. Your results are statistically significance when your p-value is less than or equal to your significance level. When the p-value is greater than the significance level, your results are not significant.

However, as you point out, lower p-values indicate stronger evidence against the null hypothesis. I write about this aspect of p-values in several articles, interpreting p-values (near the end) and p-values and reproducibility .

Personally, I consider both aspects. P-values near 0.05 provide weak evidence. Consequently, I’d be willing to say that p-values less than or equal to 0.05 are statistically significant, but when they’re near 0.05, I’d consider it as a preliminary result that requires more research. However, if the p-value is less 0.01, or even better 0.001, then that’s much stronger evidence and I’ll give those results more weight in my evaluation.

If you read those two articles, I think you’ll see what I mean.

January 1, 2022 at 6:00 pm

HI, I have a quick question that you may be able to help me with. I am using SPSS and carrying out a Mann W U Test it says to retain the null hypothesis. The hypothesis is that males are faster than women at completing a task. So is that saying that they are or are not

January 1, 2022 at 8:17 pm

In that case, your sample data provides insufficient evidence to conclude that males are faster. The results do not prove that males and females are the same speed. You just don’t have enough evidence to say males are faster. In this post, I cover the reasons why you can’t prove the null is true.

November 23, 2021 at 5:36 pm

What if I have to prove in my hypothesis that there shouldn’t be any affect of treatment on patients? Can I say that if my null hypothesis is accepted i have got my results (no effect)? I am confused what to do in this situation. As for null hypothesis we always have to write it with some type of equality. What if I want my result to be what i have stated in null hypothesis i.e. no effect? How to write statements in this case? I am using non parametric test, Mann whitney u test

November 27, 2021 at 4:56 pm

You need to perform an equivalence test, which is a special type of procedure when you want to prove that the results are equal. The problem with a regular hypothesis test is that when you fail to reject the null, you’re not proving that they the outcomes are equal. You can fail to reject the null thanks to a small sample size, noisy data, or a small effect size even when the outcomes are truly different at the population level. An equivalence test sets things up so you need strong evidence to really show that two outcomes are equal.

Unfortunately, I don’t have any content for equivalence testing at this point, but you can read an article about it at Wikipedia: Equivalence Test .

August 13, 2021 at 9:41 pm

Great explanation and great analogies! Thanks.

August 11, 2021 at 2:02 am

I got problems with analysis. I did wound healing experiments with drugs treatment (total 9 groups). When I do the 2-way ANOVA in excel, I got the significant results in sample (Drug Treatment) and columns (Day, Timeline) . But I did not get the significantly results in interactions. Can I still reject the null hypothesis and continue the post-hoc test?

Thank you very much.

June 13, 2021 at 4:51 am

Hi Jim, There are so many books covering maths/programming related to statistics/DS, but may be hardly any book to develop an intuitive understanding. Thanks to you for filling up that gap. After statistics, hypothesis-testing, regression, will it be possible for you to write such books on more topics in DS such as trees, deep-learning etc.

I recently started with reading your book on hypothesis testing (just finished the first chapter). I have a question w.r.t the fuel cost example (from first chapter), where a random sample of 25 families (with sample mean 330.6) is taken. To do the hypothesis testing here, we are taking a sampling distribution with a mean of 260. Then based on the p-value and significance level, we find whether to reject or accept the null hypothesis. The entire decision (to accept or reject the null hypothesis) is based on the sampling distribution about which i have the following questions : a) we are assuming that the sampling distribution is normally distributed. what if it has some other distribution, how can we find that ? b) We have assumed that the sampling distribution is normally distributed and then further assumed that its mean is 260 (as required for the hypothesis testing). But we need the standard deviation as well to define the normal distribution, can you please let me know how do we find the standard deviation for the sampling distribution ? Thanks.

April 24, 2021 at 2:25 pm

Maybe its the idea of “Innocent until proven guilty”? Your Null assume the person is not guilty, and your alternative assumes the person is guilty, only when you have enough evidence (finding statistical significance P0.05 you have failed to reject null hypothesis, null stands,implying the person is not guilty. Or, the person remain innocent.. Correct me if you think it’s wrong but this is the way I interpreted.

April 25, 2021 at 5:10 pm

I used the courtroom/trial analogy within this post. Read that for more details. I’d agree with your general take on the issue except when you have enough evidence you actually reject the null, which in the trial means the defendant is found guilty.

April 17, 2021 at 6:10 am

Can regression analysis be done using 5 companies variables for predicting working capital management and profitability positive/negative relationship?

Also, does null hypothesis rejecting means whatsoever is stated in null hypothesis that is false proved through regression analysis?

I have very less knowledge about regression analysis. Please help me, Sir. As I have my project report due on next week. Thanks in advance!

April 18, 2021 at 10:48 pm

Hi Ahmed, yes, regression analysis can be used for the scenario you describe as long as you have the required data.

For more about the null hypothesis in relation to regression analysis, read my post about regression coefficients and their p-values . I describe the null hypothesis in it.

January 26, 2021 at 7:32 pm

With regards to the legal example above. While your explanation makes sense when simplified to this statistical level, from a legal perspective it is not correct. The presumption of innocence means one does not need to be proven innocent. They are innocent. The onus of proof lies with proving they are guilty. So if you can’t prove someones guilt then in fact you must accept the null hypothesis that they are innocent. It’s not a statistical test so a little bit misleading using it an example, although I see why you would.

If it were a statistical test, then we would probably be rather paranoid that everyone is a murderer but they just haven’t been proven to be one yet.

Great article though, a nice simple and thoughtout explanation.

January 26, 2021 at 9:11 pm

It seems like you misread my post. The hypothesis testing/legal analogy is very strong both in making the case and in the result.

In hypothesis testing, the data have to show beyond a reasonable doubt that the alternative hypothesis is true. In a court case, the prosecutor has to present sufficient evidence to show beyond a reasonable doubt that the defendant is guilty.

In terms of the test/case results. When the evidence (data) is insufficient, you fail to reject the null hypothesis but you do not conclude that the data proves the null is true. In a legal case that has insufficient evidence, the jury finds the defendant to be “not guilty” but they do not say that s/he is proven innocent. To your point specifically, it is not accurate to say that “not guilty” is the same as “proven innocent.”

It’s a very strong parallel.

January 9, 2021 at 11:45 am

Just a question, in my research on hypotheses for an assignment, I am finding it difficult to find an exact definition for a hypothesis itself. I know the defintion, but I’m looking for a citable explanation, any ideas?

January 10, 2021 at 1:37 am

To be clear, do you need to come up with a statistical hypothesis? That’s one where you’ll use a particular statistical hypothesis test. If so, I’ll need to know more about what you’re studying, your variables, and the type of hypothesis test you plan to use.

There are also scientific hypotheses that you’ll state in your proposals, study papers, etc. Those are different from statistical hypotheses (although related). However, those are very study area specific and I don’t cover those types on this blog because this is a statistical blog. But, if it’s a statistical hypothesis for a hypothesis test, then let me know the information I mention above and I can help you out!

November 7, 2020 at 8:33 am

Hi, good read, I’m kind of a novice here, so I’m trying to write a research paper, and I’m trying to make a hypothesis. however looking at the literature, there are contradicting results.

researcher A found that there is relationship between X and Y

however, researcher B found that there is no relationship between X and Y

therefore, what is the null hypothesis between X and y? do we choose what we assumed to be correct for our study? or is is somehow related to the alternative hypothesis? I’m confused.

thank you very much for the help.

November 8, 2020 at 12:07 am

Hypotheses for a statistical test are different than a researcher’s hypothesis. When you’re constructing the statistical hypothesis, you don’t need to consider what other researchers have found. Instead, you construct them so that the test only produces statistically significant results (rejecting the null) when your data provides strong evidence. I talk about that process in this post.

Typically, researchers are hoping to establish that an effect or relationship exists. Consequently, the null and alternative hypotheses are typically the following:

Null: The effect or relationship doesn’t not exist. Alternative: The effect or relationship does exist.

However, if you’re hoping to prove that there is no effect or no relationship, you then need to flip those hypotheses and use a special test, such as an equivalences test.

So, there’s no need to consider what researchers have found but instead what you’re looking for. In most cases, you are looking for an effect/relationship, so you’d go with the hypotheses as I show them above.

I hope that helps!

October 22, 2020 at 6:13 pm

Great, deep detailed answer. Appreciated!

September 16, 2020 at 12:03 pm

Thank you for explaining it too clearly. I have the following situation with a Box Bohnken design of three levels and three factors for multiple responses. F-value for second order model is not significant (failing to reject null hypothesis, p-value > 0.05) but, lack of fit of the model is not significant. What can you suggest me about statistical analysis?

September 17, 2020 at 2:42 am

Are your first order effects significant?

You want the lack of fit to be nonsignificant. If it’s significant, that means the model doesn’t fit the data well. So, you’re good there! 🙂

September 14, 2020 at 5:18 pm

thank you for all the explicit explanation on the subject.

However, i still got a question about “accepting the null hypothesis”. from textbook, the p-value is the probability that a statistic would take a value that is as extreme as or more extreme than that actually observed.

so, that’s why when p<0.01 we reject the null hypothesis, because it's too rare (p0.05, i can understand that for most cases we cannot accept the null, for example, if p=0.5, it means that the probability to get a statistic from the distribution is 0.5, which is totally random.

But how about when the p is very close to 1, like p=0.95, or p=0.99999999, can’t we say that the probability that the statistic is not from this distribution is less than 0.05, | or in another way, the probability that the statistic is from the distribution is almost 1. can’t we accept the null in such circumstance?

September 11, 2020 at 12:14 pm

Wow! This is beautifully explained. “Lack of proof doesn’t represent proof that something doesn’t exist!”. This kinda, hit me with such force. Can I then, use the same analogy for many other things in life? LOL! 🙂

H0 = God does not exist; H1 = God does exist; WE fail to reject H0 as there is no evidence.

Thank you sir, this has answered many of my questions, statistically speaking! No pun intended with the above.

September 11, 2020 at 4:58 pm

Hi, LOL, I’m glad it had such meaning for you! I’ll leave the determination about the existence of god up to each person, but in general, yes, I think statistical thinking can be helpful when applied to real life. It is important to realize that lack of proof truly is not proof that something doesn’t exist. But, I also consider other statistical concepts, such as confounders and sampling methodology, to be useful keeping in mind when I’m considering everyday life stuff–even when I’m not statistically analyzing it. Those concepts are generally helpful when trying to figure out what is going on in your life! Are there other alternative explanations? Is what you’re perceiving likely to be biased by something that’s affecting the “data” you can observe? Am I drawing a conclusion based on a large or small sample? How strong is the evidence?

A lot of those concepts are great considerations even when you’re just informally assessing and draw conclusions about things happening in your daily life.

August 13, 2020 at 12:04 am

Dear Jim, thanks for clarifying. absolutely, now it makes sense. the topic is murky but it is good to have your guidance, and be clear. I have not come across an instructor as clear in explaining as you do. Appreciate your direction. Thanks a lot, Geetanjali

August 15, 2020 at 3:48 pm

Hi Geetanjali,

I’m glad my website is helpful! That makes my day hearing that. Thanks so much for writing!

August 12, 2020 at 9:37 am

Hi Jim. I am doing data analyis for my masters thesis and my hypothesis testings were insignificant. And I am ok with that. But there is something bothering me. It is the low reliabilities of the 4-Items sub-scales (.55, .68, .75), though the overall alpha is good (.85). I just wonder if it is affecting my hypothesis testings.

August 11, 2020 at 9:23 pm

Thank you sir for replying, yes sir we it’s a RCT study.. where we did within and between the groups analysis and found p>0.05 in between the groups using Mann Whitney U test. So in such cases if the results comes like this we need to Mention that we failed reject the null hypothesis? Is that correct? Whether it tells that the study is inefficient as we couldn’t accept the alternative hypothesis. Thanks is advance.

August 11, 2020 at 9:43 pm

Hi Saumya, ah, this becomes clearer. When ask statistical questions, please be sure to include all relevant information because the details are extremely important. I didn’t know it was an RCT with a treatment and control group. Yes, given that your p-value is greater than your significance level, you fail to reject the null hypothesis. The results are not significant. The experiment provides insufficient evidence to conclude that the outcome in the treatment group is different than the control group.

By the way, you never accept the alternative hypothesis (or the null). The two options are to either reject the null or fail to reject the null. In your case, you fail to reject the null hypothesis.

I hope this helps!

August 11, 2020 at 9:41 am

Sir, p value is0.05, by which we interpret that both the groups are equally effective. In this case I had to reject the alternative hypothesis/ failed to reject null hypothessis.

August 11, 2020 at 12:37 am

sir, within the group analysis the p value for both the groups is significant (p0.05, by which we interpret that though both the treatments are effective, there in no difference between the efficacy of one over the other.. in other words.. no intervention is superior and both are equally effective.

August 11, 2020 at 2:45 pm

Thanks for the additional details. If I understand correctly, there were separate analyses before that determined each treatment had a statistically significance effect. However, when you compare the two treatments, there difference between them is not statistically significant.

If that’s the case, the interpretation is fairly straightforward. You have evidence that suggests that both treatments are effective. However, you don’t have evidence to conclude that one is better than the other.

August 10, 2020 at 9:26 am

Hi thank you for a wonderful explanation. I have a doubt: My Null hypothesis says: no significant difference between the effect fo A and B treatment Alternative hypothesis: there will be significant difference between the effect of A and B treatment. and my results show that i fail to reject null hypothesis.. Both the treatments were effective, but not significant difference.. how do I interpret this?

August 10, 2020 at 1:32 pm

First, I need to ask you a question. If your p-value is not significant, and so you fail to reject the null, why do you say that the treatment is effective? I can answer you question better after knowing the reason you say that. Thanks!

August 9, 2020 at 9:40 am

Dear Jim, thanks for making stats much more understandable and answering all question so painstakingly. I understand the following on p value and null. If our sample yields a p value of .01, it means that that there is a 1% probability that our kind of sample exists in the population. that is a rare event. So why shouldn’t we accept the HO as the probability of our event was v rare. Pls can you correct me. Thanks, G

August 10, 2020 at 1:53 pm

That’s a great question! They key thing to remember is that p-values are a conditional probability. P-value calculations assume that the null hypothesis is true. So, a p-value of 0.01 indicates that there is a 1% probability of observing your sample results, or more extreme, *IF* the null hypothesis is true.

The kicker is that we don’t whether the null is true or not. But, using this process does limit the likelihood of a false positive to your significance level (alpha). But, we don’t know whether the null is true and you had an unusual sample or whether the null is false. Usually, with a p-value of 0.01, we’d reject the null and conclude it is false.

I hope that answered your question. This topic can be murky and I wasn’t quite clear which part you needed clarification.

August 4, 2020 at 11:16 pm

Thank you for the wonderful explanation. However, I was just curious to know that what if in a particular test, we get a p-value less than the level of significance, leading to evidence against null hypothesis. Is there any possibility that our interpretation of population effect might be wrong due to randomness of samples? Also, how do we conclude whether the evidence is enough for our alternate hypothesis?

August 4, 2020 at 11:55 pm

Hi Abhilash,

Yes, unfortunately, when you’re working with samples, there’s always the possibility that random chance will cause your sample to not represent the population. For information about these errors, read my post about the types of errors in hypothesis testing .

In hypothesis testing, you determine whether your evidence is strong enough to reject the null. You don’t accept the alternative hypothesis. I cover that in my post about interpreting p-values .

August 1, 2020 at 3:50 pm

Hi, I am trying to interpret this phenomenon after my research. The null hypothesis states that “The use of combined drugs A and B does not lower blood pressure when compared to if drug A or B is used singularly”

The alternate hypothesis states: The use of combined drugs A and B lower blood pressure compared to if drug A or B is used singularly.

At the end of the study, majority of the people did not actually combine drugs A and B, rather indicated they either used drug A or drug B but not a combination. I am finding it very difficult to explain this outcome more so that it is a descriptive research. Please how do I go about this? Thanks a lot

June 22, 2020 at 10:01 am

What confuses me is how we set/determine the null hypothesis? For example stating that two sets of data are either no different or have no relationship will give completely different outcomes, so which is correct? Is the null that they are different or the same?

June 22, 2020 at 2:16 pm

Typically, the null states there is no effect/no relationship. That’s true for 99% of hypothesis tests. However, there are some equivalence tests where you are trying to prove that the groups are equal. In that case, the null hypothesis states that groups are not equal.

The null hypothesis is typically what you *don’t* want to find. You have to work hard, design a good experiment, collect good data, and end up with sufficient evidence to favor the alternative hypothesis. Usually in an experiment you want to find an effect. So, usually the null states there is no effect and you have get good evidence to reject that notion.

However, there are a few tests where you actually want to prove something is equal, so you need the null to state that they’re not equal in those cases and then do all the hard work and gather good data to suggest that they are equal. Basically, set up the hypothesis so it takes a good experiment and solid evidence to be able to reject the null and favor the hypothesis that you’re hoping is true.

June 5, 2020 at 11:54 am

Thank you for the explanation. I have one question that. If Null hypothesis is failed to reject than is possible to interpret the analysis further?

June 5, 2020 at 7:36 pm

Hi Mottakin,

Typically, if your result is that you fail to reject the null hypothesis there’s not much further interpretation. You don’t want to be in a situation where you’re endlessly trying new things on a quest for obtaining significant results. That’s data mining.

May 25, 2020 at 7:55 am

I hope all is well. I am enjoying your blog. I am not a statistician, however, I use statistical formulae to provide insight on the direction in which data is going. I have used both the regression analysis and a T-Test. I know that both use a null hypothesis and an alternative hypothesis. Could you please clarity the difference between a regression analysis and a T-Test? Are there conditions where one is a better option than the other?

May 26, 2020 at 9:18 pm

t-Tests compare the means of one or two groups. Regression analysis typically describes the relationships between a set of independent variables and the dependent variables. Interestingly, you can actually use regression analysis to perform a t-test. However, that would be overkill. If you just want to compare the means of one or two groups, use a t-test. Read my post about performing t-tests in Excel to see what they can do. If you have a more complex model than just comparing one or two means, regression might be the way to go. Read my post about when to use regression analysis .

May 12, 2020 at 5:45 pm

This article is really enlightening but there is still some darkness looming around. I see that low p-values mean strong evidence against null hypothesis and finding such a sample is highly unlikely when null hypothesis is true. So , is it OK to say that when p-value is 0.01 , it was very unlikely to have found such a sample but we still found it and hence finding such a sample has not occurred just by chance which leads towards rejection of null hypothesis.

May 12, 2020 at 11:16 pm

That’s mostly correct. I wouldn’t say, “has not occurred by chance.” So, when you get a very low p-value it does mean that you are unlikely to obtain that sample if the null is true. However, once you obtain that result, you don’t know for sure which of the two occurred:

• The effect exists in the population.
• Random chance gave you an unusual sample (i.e., Type I error).

You really don’t know for sure. However, by the decision making results you set about the strength of evidence required to reject the null, you conclude that the effect exists. Just always be aware that it could be a false positive.

That’s all a long way of saying that your sample was unlikely to occur by chance if the null is true.

April 29, 2020 at 11:59 am

Why do we consult the statistical tables to find out the critical values of our test statistics?

April 30, 2020 at 5:05 pm

Statistical tables started back in the “olden days” when computers didn’t exist. You’d calculate the test statistic value for your sample. Then, you’d look in the appropriate table and using the degrees of freedom for your design and find the critical values for the test statistic. If the value of your test statistics exceeded the critical value, your results were statistically significant.

With powerful and readily available computers, researchers could analyze their data and calculate the p-values and compare them directly to the significance level.

I hope that answers your question!

April 15, 2020 at 10:12 am

If we are not able to reject the null hypothesis. What could be the solution?

April 16, 2020 at 11:13 pm

Hi Shazzad,

The first thing to recognize is that failing to reject the null hypothesis might not be an error. If the null hypothesis is false, then the correct outcome is failing to reject the null.

However, if the null hypothesis is false and you fail to reject, it is a type II error, or a false negative. Read my post about types of errors in hypothesis tests for more information.

This type of error can occur for a variety of reasons, including the following:

• Fluky sample. When working with random samples, random error can cause anomalous results purely by chance.
• Sample is too small. Perhaps the sample was too small, which means the test didn’t have enough statistical power to detect the difference.
• Problematic data or sampling methodology. There could be a problem with how you collected the data or your sampling methodology.

There are various other possibilities, but those are several common problems.

April 14, 2020 at 12:19 pm

Thank you so much for this article! I am taking my first Statistics class in college and I have one question about this.

I understand that the default position is that the null is correct, and you explained that (just like a court case), the sample evidence must EXCEED the “evidentiary standard” (which is the significance level) to conclude that an effect/relationship exists. And, if an effect/relationship exists, that means that it’s the alternative hypothesis that “wins” (not sure if that’s the correct way of wording it, but I’m trying to make this as simple as possible in my head!).

But what I don’t understand is that if the P-value is GREATER than the significance value, we fail to reject the null….because shouldn’t a higher P-value, mean that our sample evidence EXCEEDS the evidentiary standard (aka the significance level), and therefore an effect/relationship exists? In my mind it would make more sense to reject the null, because our P-value is higher and therefore we have enough evidence to reject the null.

I hope I worded this in a way that makes sense. Thank you in advance!

April 14, 2020 at 10:42 pm

That’s a great question. The key thing to remember is that higher p-values correspond to weaker evidence against the null hypothesis. A high p-value indicates that your sample is likely (high probability = high p-value) if the null hypothesis is true. Conversely, low p-values represent stronger evidence against the null. You were unlikely (low probability = low p-value) to have collect a sample with the measured characteristics if the null is true.

So, there is negative correlation between p-values and strength of evidence against the null hypothesis. Low p-values indicate stronger evidence. Higher p-value represent weaker evidence.

In a nutshell, you reject the null hypothesis with a low p-value because it indicates your sample data are unusual if the null is true. When it’s unusual enough, you reject the null.

March 5, 2020 at 11:10 am

There is something I am confused about. If our significance level is .05 and our resulting p-value is .02 (thus the strength of our evidence is strong enough to reject the null hypothesis), do we state that we reject the null hypothesis with 95% confidence or 98% confidence?

My guess is our confidence level is 95% since or alpha was .05. But if the strength of our evidence is 98%, why wouldn’t we use that as our stated confidence in our results?

March 5, 2020 at 4:19 pm

Hi Michael,

You’d state that you can reject the null at a significance level of 5% or conversely at the 95% confidence level. A key reason is to avoid cherry picking your results. In other words, you don’t want to choose the significance level based on your results.

Consequently, set the significance level/confidence level before performing your analysis. Then, use those preset levels to determine statistical significance. I always recommend including the exact p-value when you report on statistical significance. Exact p-values do provide information about the strength of evidence against the null.

March 5, 2020 at 9:58 am

Thank you for sharing this knowledge , it is very appropriate in explaining some observations in the study of forest biodiversity.

March 4, 2020 at 2:01 am

Thank you so much. This provides for my research

March 3, 2020 at 7:28 pm

If one couples this with what they call estimated monetary value of risk in risk management, one can take better decisions.

March 3, 2020 at 3:12 pm

Thank you for providing this clear insight.

March 3, 2020 at 3:29 am

Nice article Jim. The risk of such failure obviously reduces when a lower significance level is specified.One benefits most by reading this article in conjunction with your other article “Understanding Significance Levels in Statistics”.

March 3, 2020 at 2:43 am

That’s fine. My question is why doesn’t the numerical value of type 1 error coincide with the significance level in the backdrop that the type 1 error and the significance level are both the same ? I hope you got my question.

March 3, 2020 at 3:30 am

Hi, they are equal. As I indicated, the significance level equals the type I error rate.

March 3, 2020 at 1:27 am

Kindly elighten me on one confusion. We set out our significance level before setting our hypothesis. When we calculate the type 1 error, which happens to be a significance level, the numerical value doesn’t equals (either undermining value comes out or an exceeding value comescout ) our significance level that was preassigned. Why is this so ?

March 3, 2020 at 2:24 am

Hi Ratnadeep,

You’re correct. The significance level (alpha) is the same as the type I error rate. However, you compare the p-value to the significance level. It’s the p-value that can be greater than or less than the significance level.

The significance level is the evidentiary standard. How strong does the evidence in your sample need to be before you can reject the null? The p-value indicates the strength of the evidence that is present in your sample. By comparing the p-value to the significance level, you’re comparing the actual strength of the sample evidence to the evidentiary standard to determine whether your sample evidence is strong enough to conclude that the effect exists in the population.

I write about this in my post about the understanding significance levels . I think that will help answer your questions!

Comments and Questions Cancel reply

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

Why can we not accept the alternate hypothesis in Chi Squared Testing?

I'm a math teacher, but this aspect of stats is not my strong point. I've asked several other teachers as to why, and their responses was just "don't do it" the why was not very compelling, so I come here. $H_\text{null}$ = $m$ and $n$ are independent. $H_\text{alt}$ = $m$ and $n$ are NOT independent.

If condition $p$ is met, we accept the null hypothesis.

If condition $p$ is not met, we reject the null hypothesis.

Isn't the rejection of the null hypothesis logically equivalent to the alt hypothesis? Isn't the negation of ( $m$ and $n$ are independent) = ( $m$ and $n$ are Not independent)?

Thank you kindly for your response.

• hypothesis-testing
• chi-squared

• 1 $\begingroup$ By the way, it seems to me that you are asking for the philosophical underpinning of hypothesis testing. You may be able to get answers on that front by asking in stats.stackexchange.com $\endgroup$ –  Calvin Khor Commented Jun 29, 2021 at 7:15
• 1 $\begingroup$ I have a coin. My hypothesis is that it is a fair coin. I flipped the coin twice, and got one heads, and one tails. Do you accept my hypothesis? Do you reject it? $\endgroup$ –  5xum Commented Jun 29, 2021 at 8:30

3 Answers 3

I don't think the answer to this question is specific to the chi-squared distribution or the chi-squared test. In general, the alternative hypothesis is not associated with a specific distribution of the test statistic.

We reject the null hypothesis if the probability that we would observe values of the test statistic as extreme or more extreme than the value of the test statistic that we observed is less than or equal to $\alpha$ .

This means that if the null hypothesis is actually true, we will reject it with probability $\alpha$ . That's what we're picking when we pick $\alpha$ .

The distribution in question for the test statistic is the Chi-squared distribution . This distribution is well-defined because there's really only one way for standard normal random variables to be independent of each other.

However, if the standard normal random variables are not independent, then how would we construct a distribution for the test statistic in principle?

• 1 $\begingroup$ Thank you for you comment. "This means that if the null hypothesis is actually true, we will reject it with probability α. That's what we're picking when we pick α." I need to understand this better. We we are not actually hard rejecting the null hypothesis, we are say there is alpha probability that it is not true? $\endgroup$ –  datadan Commented Jun 29, 2021 at 21:07
• $\begingroup$ $\alpha$ is not the probability that the null hypothesis is false. The null hypothesis is true or it isn't. The null hypothesis is a proposition about the world that may be true or false, but is unknowable from the perspective of our framework. However, not everything can be a null hypothesis. "The variables $A$ and $B$ are dependent" is not a good null hypothesis because there isn't a good way to convert it to a CDF of a test statistic. "The variables $A$ and $B$ are independent", however, does not have this drawback. The alternative hypothesis is in some ways badly named, (cont...) $\endgroup$ –  Greg Nisbet Commented Jun 30, 2021 at 1:26
• $\begingroup$ since it [the alternative hypothesis] does not need to be testable the same way that the null hypothesis does. $\endgroup$ –  Greg Nisbet Commented Jun 30, 2021 at 1:27
• $\begingroup$ Ok so if the null hypothesis is: Hnull = m and n are independent. And we find this is NOT true. What does that mean? Does that mean that m and n are NOT independent? $\endgroup$ –  datadan Commented Jul 1, 2021 at 2:23
• $\begingroup$ If the null hypothesis is that $m$ and $n$ are independent (and both come from some known distribution like a standard normal distribution) and you look at some test statistic, then the null hypothesis is associated with a distribution of that test statistic. If you observe the value $w$ for that test statistic and the probability that the test statistic would be $w$ or more extreme given that the null hypothesis is true is 0.03, then you would reject the null hypothesis at the 0.05 significance level. You haven't determined that $m$ and $n$ are independent "in real life" (cont...) $\endgroup$ –  Greg Nisbet Commented Jul 1, 2021 at 2:31

The evidence can persuade you to reject the null hypothesis (though you may be wrong and make a Type I error).

Or it can persuade you to fail to reject the null hypothesis (which is not quite the same as accepting the null hypothesis , particularly if your test used little data: if I flip a coin only once, I am not going to reject the null hypothesis that it is a fair coin, but this is not really the same as accepting it).

But all you have done is test the null hypothesis by seeing whether the data was a reasonably likely outcome given the null hypothesis. You have not tested the alternative hypothesis (which in your case is very unspecific), except perhaps to decide the location of the critical region for the test of the null hypothesis. What you could do next is develop a specific new null hypothesis, perhaps based on the the data you have observed, collect new data, and test the new null hypothesis (with a new alternative hypothesis) with the new data.

This is a sort of Popper argument that a theory in the empirical sciences can never be proven, but it can be falsified. Some people find it unsatisfactory, and so take a confidence interval approach, to try to end up with a more positive conclusion than merely rejecting or failing to reject a null hypothesis.

• $\begingroup$ You make some great points Henry. I really like exploring the idea of being convinced if the sample size is too low. That said, a rejection of the null hypothesis means what? Is it a negation of the null hypothesis statement? $\endgroup$ –  datadan Commented Jun 29, 2021 at 21:11

As @Gregory Nisbet mentioned this isn't exclusive to the Chi Squared Test but applicable to hypothesis tests in general.

I shall draw parallels from the criminal justice system. If a person is arrested for a murder case and goes on trial, they are presumed innocent until proven guilty. The prosecution gathers evidence to prove that the person is guilty but if the prosecution fails to do so it doesn't mean that the person is actually innocent its just that there was insufficient evidence to say that they were guilty of the crime.

A lack of evidence does not prove something does not exist, its just that you did not find it in your specific investigation. Therefore, you never accept the null hypothesis but instead fail to reject the null hypothesis or reject the null hypothesis.

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged statistics logic hypothesis-testing chi-squared ..

• Featured on Meta
• We spent a sprint addressing your requests — here’s how it went
• Upcoming initiatives on Stack Overflow and across the Stack Exchange network...

Hot Network Questions

• Is the FOCAL syntax for Alphanumeric Numbers ("0XYZ") documented anywhere?
• Cathay Pacific Online Booking: When to Enter Passport Details?
• How to make D&D easier for kids?
• Is non-temperature related Symmetry Breaking possible?
• Does the Ogre-Faced Spider regenerate part of its eyes daily?
• Where is the phase shift on this oscillator?
• How far back in time have historians estimated the rate of economic growth and the economic power of various empires?
• Why would a plane be allowed to fly to LAX but not Maui?
• What are these courtesy names and given names? - confusion in translation
• Why is Uranus colder than Neptune?
• Logical AND (&&) does not short-circuit correctly in #if
• Event sourcing javascript implementation
• Different outdir directories in one Quantum ESPRESSO run
• Sitting on a desk or at a desk? What's the diffrence?
• What is the term for when a hyperlink maliciously opens different URL from URL displayed when hovered over?
• Christian Accountability for Actions Done in Fight or Flight
• add an apostrophe to equation number having a distant scope
• Correlation for Small Dataset?
• Is it possible to complete a Phd on your own?
• Con permiso to enter your own house?
• Why depreciation is considered a cost to own a car?
• Specific calligraphic font for lowercase g
• Are there alternatives to alias I'm not aware of?
• Where can I access records of the 1947 Superman copyright trial?

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

What if both null hypothesis and alternative hypothesis are wrong? [duplicate]

In hypothesis testing, alternative hypothesis doesn't have to be the opposite of null hypothesis. For example, for $H_0: \mu=0$, $H_a$ is allowed to be $\mu>1$, or $\mu=1$. My question: Why is this allowed ? What if in reality, $\mu=-1$ or $\mu=2$, in which case if one applies, say, likelihood ratio test, one may (wrongly) conclude that $H_0$ is accepted, or $H_0$ is rejected and hence $H_a$ is accepted?

What about this proposal: $H_a$ should always be the opposite of $H_0$? That is, $H_a: H_0$ is not true. This way, we are effectively testing only a single hypothesis $H_0$, rejecting it if the p-value is below a predefined significance level, and not have to test two hypotheses at the same time that can be both wrong.

• hypothesis-testing

• $\begingroup$ Related (particularly the accepted answer): stats.stackexchange.com/questions/232665/… $\endgroup$ –  JDL Commented Sep 6, 2018 at 13:14
• 1 $\begingroup$ The statement "$H_0$ is not true" is undefined until you describe the space of all possible hypotheses. $\endgroup$ –  whuber ♦ Commented Sep 6, 2018 at 20:59

4 Answers 4

What you've identified is one of the fundamental flaws with this approach to hypothesis testing: namely, that the statistical tests you are doing do not assess the validity of the statement you are actually interested in assessing the truth of.

In this form of hypothesis testing, $H_a$ is never accepted, you can only ever reject $H_0$. This is widely misunderstood and misrepresented by users of statistical testing.

$H_{a}$ is, properly the complement of $H_{0}$ in the sample space of the distribution under the null hypothesis. One-sided tests, should therefore properly have $H_{0}: \mu \ge c$ (for some number $c$), with $H_{a}: \mu < c$ (or vice versa: $H_{0}: \mu \le c$, with $H_{a}: \mu > c$), for precisely the reason you allude to: if the null hypothesis in a one-sided test is specified as $H_{0}: \mu = 0$, then a one-sided alternative hypothesis cannot express the complement of $H_{0}$. I (and others) therefore disagree with those who use the confusing nomenclature you describe.

See my answer here for a similar question and issue.

• 6 $\begingroup$ Thanks. What about $H_0: \mu=\mu_1$ and $H_a: \mu=\mu_2$ as in Neyman–Pearson lemma? $\endgroup$ –  Lei Huang Commented Sep 6, 2018 at 5:08
• 5 $\begingroup$ No you can do a classic likelihood ratio test involving just two points. But as Jack so well stated before, hypothesis testing was never a good idea except in very special, narrow, circumstances. Bayesians would say "get me evidence that the unknown parameter is in any interval you specify". $\endgroup$ –  Frank Harrell Commented Sep 6, 2018 at 11:50
• 1 $\begingroup$ @LeiHuang Darn it! I muff that spelling all the time! Thank you. I personally would not use the language "alternative hypothesis" to describe the two hypotheses in the Neyman–Pearson lemma, for more or less the reason I give in my answer. The NPL is also, to my mind, using a different logic than Wald-type test statistics, by asking which of these two values of a parameter the data provide more evidence of. $\endgroup$ –  Alexis Commented Sep 6, 2018 at 15:36
• 1 $\begingroup$ @LeiHuang Also: the NPL type hypothesis in your first comment is a different form of hypothesis, than the one-sided hypothesis in your original question (and, indeed, from $H_{0}: \mu = \mu_{1}, H_{a}: \mu \ne \mu_{1}$). $\endgroup$ –  Alexis Commented Sep 6, 2018 at 15:39

Put properly, we don't actually test if an alternative hypothesis is true. It is often described that way, but as far as basic statistics goes, that is incorrect.

We actually test whether there is, or is not, enough evidence to accept some "new"/"novel"/"not-default" hypothesis H. We do this by

• Taking into account what we know (Bayesian style if appropriate);
• Choosing a test we think is applicable to the data and hypothesis we are probing, and
• Stipulating a point which will be deemed "significant".

The significance level

This last item, the "significamce level", is often a source of confusion. What we actually say is, "If the hypothesis is wrong, then how exceptional would our results be?" So, suppose we set a significance level of 0.1% (P=0.001), what we are saying is:

"If our hypothesis is wrong, we just got a 1 in 1000 result by pure chance. That's so unlikely that we conclude the hypothesis is probably correct."

So you can "draw the line" where you like - for some research such as particle physics, you'd want 2 separate (independent) experiments both with a significance level of 1 in some millions, before concluding the hypothesis is probably correct. For a rigged dice game, a 1 in 3 level might be enough to persuade you not to play that game :)

But either way it is crucial to pick the level beforehand, otherwise you're probably just make a self serving statement using 'whatever level you like".

This points to one of the few serious problems with the conventional statistics through null hypothesis significance testing (NHST). A much more meaningful approach in this case is to totally abandon NHST, and adopt the Bayesian framework. If you have some prior information available, just incorporate it into your model through prior distribution. Unfortunately most statistics consumers are simply too indoctrinated, obsessed and entrenched with the old school of thinking. See more discussion here .

Not the answer you're looking for? Browse other questions tagged hypothesis-testing or ask your own question .

• Featured on Meta
• Upcoming initiatives on Stack Overflow and across the Stack Exchange network...
• We spent a sprint addressing your requests — here’s how it went
• Upcoming sign-up experiments related to tags

Hot Network Questions

• Is arxiv strictly for new stuff?
• How is Victor Timely a variant of He Who Remains in the 19th century?
• Logical AND (&&) does not short-circuit correctly in #if
• Is non-temperature related Symmetry Breaking possible?
• Is there any other reason to stockpile minerals aside preparing for war?
• What type of black color text for brochure print in CMYK?
• How much is USA - Brazil?
• Why can't LaTeX (seem to?) Support Arbitrary Text Sizes?
• Geometry question about a six-pack of beer
• Bug in scene camera?
• Is it possible to arrange the free n-minoes of orders 2, 3, 4 and 5 into a rectangle?
• Can you arrange 25 whole numbers (not necessarily all different) so that the sum of any three successive terms is even but the sum of all 25 is odd?
• Were there engineers in airship nacelles, and why were they there?
• Why should I meet my advisor even if I have nothing to report?
• Why is Uranus colder than Neptune?
• Any algorithm to do Huffman encoding without using graphs?
• Does concentrating on a different spell end a concentration spell?
• What are these courtesy names and given names? - confusion in translation
• What is a positive coinductive type and why are they so bad?
• Using Suica to train from Shinjuku to Kawaguchiko
• What kind of sequence is between an arithmetic and a geometric sequence?
• What's the point of Dream Chaser?
• Does the Ogre-Faced Spider regenerate part of its eyes daily?
• Verify that a quadratic form is NOT positive definite